Chosen Solution
The pulse l.e.d front panel stuck keeps flashing lights,But won’t let me power on? Lights won’t shut off? Won’t let me connect to phone..Is there a way to factory reset it?
@tweetjoker1112 ,Thomas, Had no luck finding info. on(2boom Pulse Bluetooth speaker) posted what I did find below. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. JBL Pulse 2 Reset procedure: Turn on the device by pressing the on/off button for about a second. Press the “Vol - " button and the “Bluetooth” button together for more than 7 seconds. The unit will display Red, Green, Blue light and go into power off stage, but with the on/off light and the light symbol lighted up. The unit is now reset to factory settings. Switch the Pulse OFF by pressing the on/off button for about one second. You can now turn your device back on and it will be reset to factory settings. UE Boom Reset procedure: Turn on your Devive. Hold down the volume down button and the power button at the same time until you hear a sound. Your UE Boom will then turn off. Turn it back on and try to pair it with your device again. Note that doing this many times in a row may harm your speaker, so refrain from doing this more than once or twice. How do I restore my JBL Pulse to factory settings? UE Boom Troubleshooting
Mine had the exact same problem and it was in demo mode somehow. TO EXIT DEMO MODE ON JBL PULSE 2:
- plug speaker in and it will turn on
- hold the JBL connect button and the volume + button for 10 seconds
- turn off and unplug then it should work normally again!!!
Open the device. Try disconnecting and reconnecting the Body Control Module (BCM) connectors. Worked for me!
On a JBL speaker pressed the Bluetooth and plus buttons for a second an finally the speaker turned OFF.
how do I fix my stuck power button on bluetooth
