Chosen Solution
When I try to play music on the speaker, the speaker won’t turn on. It seems to be unresponsive to the power button being pressed. How can this be fixed?
When the speaker does not turn on, it could be because of a few reasons. The first reason is that the battery is not charged. Charge the battery for a few hours and then try to turn it back on. The second reason is that the Oontz Angle 3 may have been water damaged. The Oontz Angle 3 is not waterproof, so place it a designated area and give it time to dry out. So if neither of these solutions work please refer to the troubleshooting page to identify the real cause of the issue.
it happened the same to me, in my case the problem was the power switch, i had to gently press it downwards while i was moving it to “ON”, that worked for, such a pitty that i had to figure it out because i paid for it… but at least it works. The thing is that if i press it a little bit upwards it will turn OFF, so it is a “contact” problem, you need to press it downwards while you turn it on so it stays well placed in order to make the right contact and turn this on. Hope that helped.
Hey, I fixed my problem!!!!!! So, I have had the Wismec Active as our sound system for the vape shop I work at, as it helps to sell the mods. Mine JUST stopped working. I peeled off the silicone protector and down by where you would plug it in to charge…..there is a hole and just under it the letters RST. Take a sim card pin (I used mine from the Ifixit kit I bought from ACE) or other small pointy object and press the reset button for five seconds. Voila! It turned on and started connecting. Peeling off the silicone will not harm the mod, it will go right back on. Just make sure everything is centered on the buttons and stuff. Happy vaping! <3 M3D1C
