Chosen Solution
I have a convertable Jet Pump for my water well, what can be causing it to not suction water from my well? The (2) pipes coming from the well, are both filled with water.
@bilbo2 , William, Information from link below. Jet Pump Motor Runs but No Water is Being Delivered If your jet pump sounds like it’s running, but you aren’t seeing any water coming out, there are a few possible causes: The jet pump has not been primed. The jet pump is sucking air. The depth-to-water in the well is too deep. The check valve is installed upside down or is stuck in the closed position. The pump motor is running on the wrong voltage. There is too much restriction in the suction pipe. The check valve, tee, or elbow is installed too close to the pump inlet. The suction pipe is not far enough down into the water source. The suction pipe is frozen. More info./troubleshooting at the link below. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.tractorsupply.com/know-how_f…
