Posts

Chosen Solution My macbook says it is always charging. When I unplug my device iStats shows that the rampage drops to 0 but it still shows a charging/charged symbol on the battery. Could this be a logic board, dc-in, or battery problem? Edit: Lets see if we can collect some diagnostics. Download this app: coconutBattery. Post a screenshot on what it shows here in your question (edit it). I would also recommend you reset the SMC to see if that fixes things....

Chosen Solution Why does the message ‘raise the flash’ appear on my screen? Hi @Lm Duncan, If you are using the Nikon ViewNX2 software to transfer your pictures, it states At default settings, all new pictures on the camera memory card or in the camera’s built-in memory can be copied to the computer by clicking Start Transfer in Nikon Transfer 2. The pictures will automatically be displayed in ViewNX 2 when transfer is complete....

Chosen Solution I recently replaced my cracked screen and now my phone will not charge pass 3%. It will not stay on for a long period of time and it repeatedly turns on and off. Also my front camera does not work but everything else is perfectly fine. Try a different screen and check for any component damage around the bottom fpc

Chosen Solution Hi All, Just as a forward, I have been all over reddit and ifixit looking at many similar questions but with slight variations and none of those fixes have worked for me. I recently endeavoured to take this old MacBook Pro 13 (2012) and breathe new life into it with a new battery & SSD. Battery and SSD physical installation went fine. Unfortunately, from the very start I have had many problems with the software and experience of the SSD....

Chosen Solution LG Stylo 1 wont turn on and it turn on putt goes to the charging screen then off and its says it is water damage but i never put it in water LG had some issues with that on other models as well. Try a temporary fix by clearing all the apps caches under Settings and under Storage and under Internal Storage and under Cached Data. Also hold Volume up, down and power button at the same time for some time until it reboots....

Chosen Solution my phone got water in it ,we dried the phone ,but when i came to charge it my phone just turns on off by itself .it only dose this when i charge it . i have taken out the battery and still nothing .can i do anything .cause i dont want to buy a new one Drying is not enough. Most likely particles from the water, is eroding the board away as your read this....

Chosen Solution My iPhone 8 Plus, when taking videos with the main (rear) camera, just outputs static sounding hissing noise over the entire audio. This suddenly started happening a week ago; before then the audio was clear. Front camera audio is fine, and voice memos audio is fine as well. It’s just the rear microphone. I tried cleaning the mic, and it’s perfect on the outside, but the hissing has only gotten worse....

Chosen Solution I’ve repaired literally thousands of laptops in the past couple years. I don’t bat an eye at most things anymore, but I still run into issues with laptops that have a separate glass digitizer with its own control board. The cable almost always splits into two and you have to line it up with both connectors on the control board. Don’t expect them to always line up perfectly which makes it a pain to get connected because the low amount of flex means you really need to insert both parts at the same time....

Chosen Solution I have Mac OS X 10.7.5 (Year-old Desktop). The sound tells me that it’s all the way up, but it shows a ø sign under the sound volume. it will not let me adjust the sound, and it does not play sound. When l restart the computer, instead of the normal Mac startup sound, l get this loud tapping noise for a few seconds. Safebooting doesn’t help, restarting doesn’t help....

Chosen Solution My iPhone 5 turns itself off even with a charged battery. Piero, Generally when the phone turns itself off when it is still charged it is caused by a faulty battery. You can follow this guide to replace it. How to replace your iPhone 5 battery

Chosen Solution I bought this MacBook the last month with the faulty screen, the description said it was cracked and nonfunctioning. The display showed only backlight with adjustable brightness but no image, until these days. The last week I was installing the new beta of Monterey (Beta 6) and when the installation was over I see that the screen was working, and showing only some lines in the middle but completely working....

Chosen Solution My rechargeable screwdriver will not charge when it is placed in the charging bay. The LED light is not on. Hi Mark, First, you should check that the charging bay is plugged into a working outlet. If so, inspect the charging contacts located in the charging bay near where the rear of the screwdriver sits. Be sure there is nothing blocking these contacts from making full contact with the contacts on the screwdriver (i....

Chosen Solution When I put my CD into the CD drive and close it, nothing happens! It won’t read the drive, I think because nothing comes up on the screen. What’s wrong with it? Ahsan, a potential reason for this could be a bad drive. Or the computer might not be registering it. If it’s the former, this’ll require a replacement. The latter would require going into your BIOS and enabling it....

Chosen Solution Looking for schematic diagram for wifi. Changed the wifi card but still not working. Does anyone have the schematic so I can check the circuitry @jaco1 see if this schematic will work for you. I do not have a boardview for this. Let us know what numbers you have on your motherboard. Should be a Compal motherboard number If you can’t see enough when clicking on the image, you can download the image and zoom in with your image software...

Chosen Solution will not start. the door does not lock. help! Door or Lid Latch Assembly If the washer lid or door won’t lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design. Door Lock Motor and Switch Assembly If the washer lid or door won’t lock the lock and switch assembly might be defective....

Chosen Solution My CD ROM drive is shot. I don’t want to replace it. Since I never use this CD ROM, I was wondering if I could remove it. Will the laptop still boot and run normally w/ no CD ROM drive? thanks and happy new year, =brian Update Thank you for the replies. I will do so. “If thy CD ROM drive offendeth thee, pluck it out.” =brian Hi! Yes, it should work fine without a CD-ROM....

Chosen Solution My speaker is fully charged, the name shows up in my iPhone, and it says it’s connected. But when I go to play music or videos, the sound comes out of my iPhone. I checked ‘devices available’ on my Spotify app and the UE boom doesn’t show up. I’m not sure what to do?? If your UE Boom 2 portable speaker has stopped producing any kind of sound, see the UE Boom 2 Is Not Producing Sound problem page for possible causes and solutions....

Chosen Solution I put a new frame on my iPhone 5s and put it all back together. I had it working except the screen didn’t want to rotate so I took the front screen of again to try to solve these problems. I reconnected the LCD cables and home button and now I am stuck in a reboot loop, and my screen has a horrible line down the middle. I have had this problem before and I figured out it was just the screws being in the wrong holes on the LCD cable shield....

Chosen Solution So I just did an digitizer change on an iPad mini 2 and now I have a super-sensitive home button. Any one knows why? I just have to lay my finger on it an it will react. Double tapping it will bring up Siri. Also putting some pressure on the right side of the home button on the glass will give the same reaction as to using the home button....

Chosen Solution Hello! I starting having a problem with my Mac a few months ago. My Mac display falls asleep on its own (the sleep light flashes when this happens) and will not respond to keystrokes or even when I press the power button. It started falling asleep and waking up randomly every once in a while but over time it has begun falling asleep every few minutes to every few seconds and will eventually reach a point where it won’t respond or wake up for hours(sleep light flashes the entire time)....