Chosen Solution This started back in November, My phone would get too cold and would have a flickering screen. I tried many factory resets but no such luck. I switched to another phone for a while but am back to the S7. If the phone temperature is too cold the phone screen goes completely black and I can’t see. I literally have to place my phone a heater in order for the screen to light back up....
Chosen Solution Why does it keep pausing while playing music Ok zte blade x randomly pauses my different music apps. Also pauses youtube videos whenever it wants to ive cleared all caches, hard reset, removed and redownloaded still same problem did the battery optimization still nothing…. All my music apps do this. I have updated my phone. Uninstalled apps I don’t use. Cleared my cache and restarted my phone and still does it....
Chosen Solution I’ve had my camera for a while, and it doesn’t stay charged as long as it used to. Is a component malfunctioning, and if so should I replace it? All batteries suffer from shorter battery life when they get older. The battery isn’t really malfunctioning when this happens, so you don’t need to replace it. But if you need your camera to last longer between recharging, you may choose to replace it....
Chosen Solution My younger nephew was playing with my phone and accidentally spilled some juice on it. I didn’t realize that he had spilled something on it until a bit later. It was working fine at first, but about an hour later my screen started acting crazy. I can’t really type without it pressing other letters, it doesn’t let me slide up to unlock my phone with face recognition, and when I call someone it will mute or hang up on its own....
Chosen Solution I dropped my phone on the back and the flashlight and front camera didnt work, got it replaced and it was fine. A few weeks later I shattered the screen and got it replaced but not by an actual business. The screen inverts sometimes, the touch to wake is iffy, and recently the display stopped working. It started working again but now my phone will say it’s charging but it will not actually charge....
Chosen Solution I have a A1430 WIFI + CELLULAR iPad which was running completely fine. However, it start discharging completely when the battery came down to 30% . Then , while plugging in to charge, first the red battery comes on followed by the Apple logo & keep going on loop. Doesn’t charge or go beyond the Apple logo. Really frustrated & kindly requesting for suggestions. Pleasure https://youtu.be/xx9VM6GMcnM Your problem appears to be a dead battery....
Chosen Solution My device won’t turn on even though I’m holding down the power button. If it’s not turning on, the battery may not have any power. Try charging the device to make sure that an uncharged battery is not causing the problem. Also, if the battery is defective altogether, it may need to be replaced.
Chosen Solution The machine powers on. The two lights are blue, but when I push either one to brew a cup, nothing happens. What might be the problem and how would I repair it? I literally pressed the power button as many times as I could repeatedly and fast. It started making a noise so I continued until the noise kept going without me needing to press the power button. After a minute it reset its self and all the lights and buttons worked as properly....
Chosen Solution Hello, My buddy recently tried to replace his iPhone 6S screen. He followed the directions and managed to get everything switched over. However, when he turns the phone on, the lock screen will come up for a split second and then turn off again. He gave it to me, and I checked to make sure the cables were connected properly. I also discharged the battery. That did not help, so I attempted to reinstall the old screen....
Chosen Solution Okay. So, my iPhone 4s was not turning on at all, so i ordered a replacement battery, dock connector, and logic board for the iPhone from Ifixit.com. Followed the instructions to each of the guides. Now when i press the power button, the screen works but it shows the ’needs charging icon’. I had the iPhone on the charger for 7 hours and i’m still getting a low battery....
Chosen Solution i’m having problems with an iPhone 5s, The iphone will only take a battery that is charged it will not charge once an adapter has been plugged in. I have changed the battery , and also replaced the charging point hoping for an easy fix. Obviously this is not the case so just wondering if anyone out there has any more information on what could be causing the problem....
Chosen Solution My 3g power button does not work, the phone will not ring or vibrate, and the speaker phone does not work. The speaker jack works fine and is clean of debris. I did not get it wet, but it has been dropped several times. Where the speaker jack is located, I can see a small crack 1/4 inch going south from the top of the phone. There is a small dent on the bezel above the right speaker....
Chosen Solution I spilled tea on my trackpad,I stupidly just dried it off the surface that was it.Because I was using a wireless mouse I didnt notice it immediately but about an hour later I noticed that the trackpad isnt working,the buttons on the trackpad are fine but not the trackpad itself. I really need to get out of this situation as its a shared laptop The track pad will most likely need to be replaced and as a computer tech and someone who owns this model it requires a complete system tear down to the mother/logic board....
Chosen Solution I have a Samsung LED tv model# LN32B360C5DXZA that was working fine one evening but the next morning wouldn’t turn on and the red standby light was out. I ordered the power supply board and replaced it and it does the same thing. When connecting it the standby light comes on momentarily and then goes out. I’ve tried the 30 second holding of the power button with no luck....
Chosen Solution I was cutting a ridge in a board, stopped inbetween to sand and check if it is wide enough to fit my board and the dremel just wouldn’t turn back on. I opened it because I thought there might be dirt inside but not really. The brushes are still 1/2 inch+ so it can’t be that and tested on different outlets. The unit not running after stopping is probably the speed control board....
Chosen Solution There is a screeching/crackling sound coming from my speakers. What is this and what should I do about it? If your speakers have a screeching/crackling sound from it, try re configuring. For more information refer to the troubleshooting page
Chosen Solution I recently bought a 7th gen Classic which was stuck at the Apple logo, so I followed the answer below: iPod will not sync, is stuck on Apple Logo Stuck on apple logo and will not go on diskmode I was able after some tries to place it on disk mode and even run a SMART test, which came out with no reallocs or pending sectors. When placed on disk mode my windows PC recognized a drive being connected but just that, wasn’t able to show any drive property or information neither was it recognized by iTunes....
Chosen Solution I have a 120GB PS3 slim that I bought in Scotland during Christmas 2009. I brought the console back with me to South Africa and I am using a EU to SA plug adapter. I was playing the PS3 when I had a power failure at home, so I thought all was well and flicked all the switches back on to carry on gaming. The console started up fine and everything was running as normal but after about half an hour into my gaming session the console just crashes without warning....
Chosen Solution Whenever I take a picture the flash does not activate. What is the settings? You can tell the camera not to use the flash and you can even tell it to use it even during daylight shots as a fill-in. If you’re sure it should be going off as the lighting is very dark you may have a broken flash tube. Did you drop your camera? Often that’s when the tube breaks....
Chosen Solution Hi. I bought this very compact pocket projector some months ago, and it worked fine. But one day I turned it on and the image was all yellow-ish. I believe those projectors use three light colors: red, green and blue, so I looked at the image carefully, and indeed noticed that everything that should have been green was a dark, undefined color. So I deduced that the part of this projector that actually emits the green light (a LED, I presume?...
