Posts

Chosen Solution When I plug in my headphones they work fine except that the speaker on the tablet does not shut off. Have tried several headphones and checked some obvious setting but nothing seems to correct the problem tripld sounds like a stuck headphone jack. Sometimes a bit of 90%+ isopropyl alcohol (1-2 drops only) and moving a headphone connector in and out of the jack may free it up. If that does not work, you will have to disassemble your Tab and change the audio jack....

Chosen Solution Spindle on Cuisinart has flat side; blade shafts that fit over spindle do too, but don’t turn even if flat sides are carefully matched. Motor is OK, and spindle turns without blades. @buzz31 , Maria, If it is just press fit, it sound like the collar on the blade is worn and is not able to fit tightly on the shaft of the motor any more, maybe it has a crack(especially if it is just plastic)....

Chosen Solution Hi everybody I have ASUS X552M notebook and my display going crazy . Sometimes it showing grey lines and stripes (both horisontal and vertical, like those in picture), sometimes it goes in pure white, and sometimes it showing normal picture. Strange thing is that, that this happening randomly. Sometimes it works perfectly after starting, and sometimes dont. Picture of display On external monitor everything looks OK. Any idea Update (03/02/2018) I have checked flat cable, and think it is ok....

Chosen Solution I fell and dropped my iPhone 12. It was in a secure case, but when I picked it up I realized that the lock button was stuck and it would no longer lock. The area around the lock button is SLIGHTLY bent, not too bad, but slightly. However, there are no cracks on the phone and it is working well besides the lock button. Is there any way to fix this issue?...

Chosen Solution I turn on my tablet and it will just stay at the boot up screen. what do I do, how do I fix it??? hi Ricky, were you able to fix it? i’m having the same issue… thanks! Virginia.

Chosen Solution I have a mid-2009 Macbook Pro13" Unibody 2.56 GHz and would like suggestions as to how/possible upgrades in all respects: Logic Board, RAM and Hard Drive. I also think it would be appropriate to mention that I am ashamed to have selected a new MacBook Pro 13" 2.7 GHz Intel Core i5 without the crucial upgrade-ability that the machines have had since their inception. I don’t see any major improvemet in fact I detest the force touch trackpad, the battery....

Chosen Solution Its been over two weeks in rice. Still wont turn on Save the rice for dinner (not that rice though…) Water damage is horrible. Electronics Water Damage You MUST replace the battery. Microsoft Surface Pro 4 Battery Replacement This will also be needed most likely to clean the damage: Microsoft Surface Pro 4 Teardown Good luck!

Chosen Solution Do I have to take the wheels off to replace my sway bar bushings and links jewelsguy69 yes you do, otherwise you will not get to the nuts and link assembly. Here is the suspension part from the FSM for your vehicle Toyota Camry Suspension

Chosen Solution Ordered a laptop cleaning with replacement of thermal paste at the nearest service to the house. I watched the process myself, I did not notice anything strange. After that, I noticed that the laptop stopped seeing webcam, tried different applications, reset SMC, did not help. At the service, I am now ignored, probably do not want to fix. Is there any chance that they just forgot to connect some cable and I can fix my laptop by myself?...

Chosen Solution my laptob is hp pavilion dv6-2130ee can’t let me install windows xp and the bios didn’t support that system just win 7 and up but I need xp in my work so please help me … thank you all and sorry for my bad language. Rather than using windows xp as your OS why not just install a VM and run it in the virtual machine when you need it and use windows 7 for everything else http://www....

Chosen Solution Hello , I have the following problem with my iMac 24” 2.33 GHz, 2GB, 500GB HDD. At startup I get a flashing folder with a question mark. After trying everything I found online with no success, In Target Disk Mode I was able to access the drive and wipe it off. I have the original install disk, but it doesn’t let me install OS-X, extended hardware test shown 0 errors....

Chosen Solution My phone usually dies after a short while of usage, but yesterday it lasted longer than normal, and said it was at 93% the entire day, until my last period class. I used it all that period because the class was art and I needed a reference photo for my project. All was going fine until it suddenly shut down. This was normal for my phone, so I didn’t stress about it too much....

Chosen Solution I must say the latest hardware change that I had made first. Recently I upgraded to a 500 gb NVMe Crucial P1 SSD with an adapter pulling out the original 128GB tiny one. This issue has started since two weeks of installing it. I am not saying it might be the direct reason. The problem I have is the display is now tinted in pink after coming back from sleep, not restart....

Chosen Solution I was eating pizza, and when I stood up to get some soda my phone fell from my lap. Hi Adrian, Have you tried removing the battery? Leave it out for 1-2 minutes, reinstall it and then start your phone and if still no good try a hard reset again. I figured it out. Sometimes smartphones will appear to be on and working but will be unresponsive to your touch....

Chosen Solution I have had my board on the charger for couple days now when I have it on the charger it turns orange but other than that doesn’t turn on without charger. Camilyn VanDenBloomer, If this problem has just started since getting the new charger and you have a hard time plugging it into your balancing board, the charger could be wrong/defective. If possible try a different compatible charger. Check the charge port for any damage pin/pins, dust debri(pick/blow/clean out), test charger and battery with DVOM to see if charger and if battery does hold a charge(replace battery if not holding charge)....

Chosen Solution I keep pushing the on button, but my device won’t turn on! The most likely cause is a drained battery. Try plugging in your device to charge it. If the device won’t charge, then the battery may need to be replaced. Check out our Troubleshooting page for more information.

Chosen Solution New battery..not dell..but Rayco. Inserted, had power..got home plugged in cord to charge battery. Didn’t seem to be charging, and drained to 6% super fast. What is wrong? Hi! You could drain the battery all the way down and then let it fully recharge . Do this a couple of times, so the cells and the chips get formatted properly. If you can’t get it to work, you might be dealing with a bad part....

Chosen Solution I bought this old LG tv (model 37LG50-UG TV) plugged in my PS4 and used it’s tv remote, all of a sudden a different pop up came up, from the first one and I have no idea what to do and the website manual doesn’t help at all please help! Thank you. Edit: 7/18 (Ignore the cartoon s) but it’s basically just the menu options, pop up menu, or what ever you call it....

Chosen Solution Turn on tv,and it’s bright for about 30 seconds, then gets darker. Reset tv,checked for updates,and still having problems. Tv is about 3 years old? Don t want to buy a new one,but seems everything is throw away now-a-days. Sad. Fixed it by resetting dish box Rusty Jones this could be caused by a bad lamp or a bad inverter. You do want to go ahead and check the lamp first....

Chosen Solution I dropped my iPhone 7 a few days ago and before it being dropped a few days ago, it had some cracks in it but I could still see the screen and everything worked fine. After I dropped it the other day, my screen isn’t turning on/i can’t see it. I know it’s charging but when it’s on the charger my phone gets hot. The answer is already in your question, because it’s been dropped....