Posts

Chosen Solution I have a broken 2012 MBP Unibody 13" with original keyboard. I also have a 13" 2011 model which had its keyboard replaced with an aftermarket one at the shop. I really don’t like the aftermarket one, since the keys are far more mushy and less consistent across the various keys. I’m wondering if the 2012 keyboard is compatible with the early 2011 model? Does anybody have insights into this?...

Chosen Solution Hey guys, I bought a used MacBook Pro 13" Unibody and after putting a new HD and loading up Snow Leopard it runs great. However it will not recongize the battery. It came with 2 batteries and would not read either of them. My initial theory was well both batteries are dead, so I bought a brand new one. Still the same thing, it didn’t read. Then I did a little detective work and found the battery connector was broken and missing one of the side tabs and a pin....

Chosen Solution I’m considering the top end Mac Mini, upgrading the RAM and SSD/flash myself. Your teardown of the 2018 (newest) model is fantastic but a little unclear on the SSD removal. At a point it says some are soldered down, and somewhere else, it’s pictured that the module is plug n play. Apple way overcharges for both RAM and SSD upgrades. An example: transintl.com sells 2x32 gb RAM for this model specifically for ~$350 while Apple charges $1000 for 64GB upgrade Ridiculous!...

Chosen Solution Where can I find the full operating system for xbox one? https://support.xbox.com/en-US/xbox-one/… However if you are starting from a blank HDD, you may need to pre-partition the HDD to Xbox specifications, which is not possible using standard software alone, there should be tutorials online. Can you be a bit more specific? What do you need the operating system for? Putting it on a PC? All it is, is a modified version of Windows 10....

Chosen Solution The ZR button isn’t stuck down but it acts as if it’s being pressed constantly (automatically scrolls to the right on home screen) blowing into it and pushing down doesn’t help it and I don’t know how else I would fix it Sounds like there could be liquid damage around the button, which is triggering it. The only option may be disassembling this and cleaning the button mechanism with isopropyl....

Chosen Solution Hi There My TV had problem I cant turned on my TV when I turned on 6 led red light blinked. Please advise what I should do to fix this problem without paying high cost. Cheers Hi @camchew , A 6 blink error code is a backlight problem. This could either be the backlights, the inverter board, the power board or the main board. Unfortunately the service manual doesn’t appear to have schematics so the best you can do is to visually check the power board and the inverter board for any obvious component damage e....

Chosen Solution I changed the Logicboard of the iMac. Since I did this the speakers are not working properly. If I plug in both speaker cable then the right speaker (looking as user) ist making distored sounds already on the startup chime. If I plug out the other speaker, then the right speaker sounds good! If I plug in just the left speaker (the one with the subwoofer), then no sound at all....

Chosen Solution Speaker sounded muffled so i opened the phone and removed grill cloth/safety cover for speaker which was teared,now works fine does leaving it open disables water and dust resistant, Is there any alternative tapes or covers to soften the speaker Please do reply to this mail id if possible vsagr6@gmail.com Hi vidhya, Opening up a water resistant product means it is not water resistant anymore and will never be anymore....

Chosen Solution Spilled soda last night…..shut off right away, took out battery and left to dry ….out back together tonight and screen is upside down and not all keys work…..shift/alt/uparrow doesn’t work….some of the keys for my password don’t work so I can’t get to the settings tab to try and fix that way….touch screen still works Hi @jepoyntz As you know water, and electronics and electricity are not a good mix....

Chosen Solution I have the 1.4GHZ i.5/4 gb/500GB hard drive model. I do not know how to tell if it has a fusion drive. Can I add an SSD to this and if so, what do I need besides the SSD? It runs so slow. I hear the ssd can speed it up. Your system has only one drive currently (500 GB HDD) it is not a Fusion Drive which is where two discreet physical drives (HD & SSD) are combined to be a single logical disk....

Chosen Solution My SAeco has been cleaned to the best of my ability, having taken apart the brew unit. Still it only dispenses about 2 oz of coffee, no matter the setting, and then stops, and red light comes on. Never brews more than that amount. Reset is , start over, same result. Hi this video might help you out or at least point you in the right direction. Vienna...

Chosen Solution What to do if my iphone is stuck in itunes logo whithout booting Connect it to a PC or laptop that’s running iTunes and you should have the ability to reset the device. If that doesn’t work, reply and I can help you find the issue!

Chosen Solution Stuck on dopo screen. Tried all rebooting methods. Just keep coming back to same screen. Sounds like a hard reset might be needed here. Hard resetting your tablet will erase all data stored on your tablet! You can hard reset your tablet by doing the steps below… Press the power button to get the option menu for these 3 options Power off Reboot Silence phone option. On that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet....

Chosen Solution Greetings guys, First time posting here so be nice :) I have recently replaced a screen in a MacBook. The original screen had a faulty screen cable and not being my Macbook I do not know what the screen looked like while it was working. Now after replacing the screen (whole lid unit) the screen had a blue tint to it. The Mac will still start and run correctly....

Chosen Solution I often play PUBG mobile and most of the times, I play while I’m charging. The battery got drained for a couple of times still even though its plugged in. So, my phone often gets drained. Today, I got my phone drained again because of too much playing but when I plug it in, it turns on but it’ll turn off again for just seconds and the same thing goes while it’s still plugged in....

Chosen Solution So today I went to turn on my chromebook, but the sound was not working. Any suggestions? Try to shut down and go to settings press volume and mute it then shut down once more and turn it up it worked for me so good luck Bradon Nolen No sound could be several things: First: Check that the earphone/external plug is fully plugged in. Then go to the lower right hand corner, to the volume control and click on the arrow > and make sure that your device (headphones etc) is selected....

Chosen Solution I tried to print on some heavy paper. The paper jammed. I was able to clear the jamb, but now can only print if I push the paper into the second set of rollers. Everything else seems to work. I can scan and the printer works once the paper is pushed into the second set of rollers. Update (12/26/2019) Thanks for the info. I fixed the problem by purchasing a new printer....

Chosen Solution It used to work, but then there’s been a lot of time i didn’t go on the computer. I used to charge it on my iHome. Steffy, try an AC adapter and see if it charges. It is possible that you battery is to run down to be charged through a USB port. If it charges on an AC adapter, you may need a new battery. Also, try a different USB port and a different USB cable....

Chosen Solution When I miss a call, the device will not record or save any of the messages people leave. What should I do? Make sure the answering system is on. ANS ON light on the telephone should be on. Make sure the memory of the answering system is not full. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems...

Chosen Solution I try and open my front camera and all that shows on my screen is black. What is going on? There may be a loose connector from the camera to the motherboard. Please refer to our front camera replacement guide for any help. Go to setzing,apps,camera and make erase data+chache and force stop…. on some models working..