Posts

Chosen Solution https://www.amazon.com/gp/product/B07C78… @nytryder26 the issue is going to be that even if you install a fan, your airflow is just not there. You might even create more heat with it. You will have to modify the case to allow the air to pass through. If you are serious about making this work, I’d take the case to an automotive body shop (or sheet metal fabricators) and see if they can “punch” a couple of louvres in there....

Chosen Solution Just had a new lcd and glass but still wont power on, what could it be? It wouldnt power on before repair either if your device isnt powering on at all, it can be so many things. i would suggest to start by exciting the battery. (hold a 5.5V power supply to the battery) leave it there for abount 5-10 minutes to get the voltage regulated to about 4V....

Chosen Solution Would someone who is familiar with this machine check and see if I am wrong. The tear down for this model may be the incorrect machine. This tear down looks to me like the Intel not a G5. I have both machines and this is not the tear down for the G5. iMac G5 17" Model A1144 Repair Judging from the pic in step 3 here, the EMC number is 2081, which does indeed correspond with Model A1144 (iMac G5 17" iSight)....

Chosen Solution I have the option to get a $30 back glass replacement, or a $100 back housing replacement. Since this is a rather old phone, I want to spend a minimal amount. Will glass replacement be okay? back glass replacement is fine depending on who is doing it and what method they use to remove the old glass The rear housing is what virtually every other part in the phone is mounted on, so replacing the rear housing isn’t just any old part swap, but more like a complete disassemble and rebuild of the phone....

Chosen Solution Hi. My Sonos Play5 Gen1 won’t boot up and shows a continually flashing white light. I’ve done all the reset processes and contacted Sonos who have offered to swap it for a fee if £350! I’ve done all sorts but nothing works in rebooting. Please help!! Blinking white lights are a part of the boot up process of the device. If you are on wireless I’d suggest hooking it up to Ethernet and attempting to get it to connect to the app

Chosen Solution i bought a soundcore flare a few days ago and its not charging at all, ive tried resetting it and i dont know what to do. any one have any ideas what could fix it because i paid cash for it and i dont have the receipt. The Anker Soundcore Flare is similar to the Bose Mini. Anker online support doesn’t even seem to know this. Resetting it is as simple as depressing the power button for a full 10 seconds....

Chosen Solution Hi guys, i bought a sportster 883 r two months ago and i knew from the mecanic that the guy i bought it from, had a failure in the oil pump and he drove 15 miles, the mecanic said he changed the pump and one from piston head. But a tic tic sound is coming from the engine and the sound becomes higher when i drive long distance, anyone can help me what this sound may be?...

Chosen Solution hi i dont know what happenned but when i switch on my dell vostro 1014 after i typed my password the it stucks to the page and there’s only a small line like underscore keep blinking , i tried to press the keyboard but nothing was being type there … Boot your laptop using Windows 7 installation DVD on getting “Press any key to boot from CD or DVD” press any key On “Install Windows” screen, select Repair your computer shown at lower left In System Recovery Options screen, normally C: drive is default if any other you can make note of the name and click Next Now in Chose a Recovery Tool window, open Command Prompt....

Chosen Solution I have washed the filter, cleaned the rotater brush and housing and chechecked the attachments but the suction right at the motor head is low. Also, the Charge is full . @penteliuk56 ,Eileen, it sound like the clog is up in the head perhaps, remove the bin and wand and look up in the inlet and outlet of motor assy, use stiff wire to unclog and then thoroughly clean by blowing out with compressed air....

Chosen Solution i got an older toshiba laptop. it is a satellite pro l70-a-13z. sadly there is a supervisor password set wich i do not know. without this password i can change nearly nothing in biossettings. i made it work so it would be a shame to throw away a working laptop because of this stupid password. i need to know where i can find the reset jumper on the motherbord....

Chosen Solution Hi guys, Before anyone says “use it as a door stop or a coaster” hear me out, i was given this for free and want to give it to my daughter to use for school, the issue i have here is the person who gave it to me decided in “recovery section” to go into Dos and do a diskpart (Clean) on the drive and now the surface turns on for 2 seconds flashes the surface logo then turns off and repeats over and over...

Chosen Solution My screen went gray then would not power back on. I have held the power button and volume down button for the 12 seconds and it came back to life briefly. But now is not powering on at all. What could be the issue? Probably is this chip m92t36 that needs to be replaced or the usb c port

Chosen Solution Everything comes up on the desktop but for a few minutes nothing responds to the mouse. Update (10/10/2017) iMac5,1 (20" screen) 2GB ram OS 10.6.8 Available HD space: 210 GB No anti-virus because OS not supported any longer. I tried to find one. History is home office stuff. Recently a little more intense as I wrote a book using InDesign. I did a force quit when it was acting up and only thing there was the finder....

Chosen Solution I’ve learned the hard way that, no matter what device you work with, you should disconnect the battery (and the charger) before (dis)connecting a LCD! I’ve had many LCD’s or backlight components dying because I broke this rule. How come it’s not necessary with the iPad Air? For any electronics it’s a general rule to always disconnect power sources from it. I’ve had iPads come in with blown backlight circuits (filter usually) on the iPad Air 1 that were caused by unplugging / plugging the screen when the battery was still connected to the logic board....

Chosen Solution I recently bought a used iPod nano 1st gen. I hooked it up via usb cable to my computer, it charges fine but it is not recognized by my computers USB removable hardware. I have 4th GEN nano that works fine the same USB cable. I tried resetting the 1st GEN nano and it doesn’t solve the problem. What could it be? Hi, maybe its formatted to MAC and you have a PC....

Chosen Solution Hello, so the problem is way before it got really serious. Before whenever it made a mad rattling shake and loud sound i just shut if off and when i turn it back again it’s back to normal. But this time whenever i do the same procedure just a few minutes into using my laptop it makes this really scary sound and vibration here is a sample video. I don’t think that it is on the hdd because the fan area has the most vibrating area and the loudest part of the noise....

Chosen Solution I keep trying to turn on my Logitech UE Boombox but the power button switch seems to be stuck how can I get the button unstuck? You may need to wipe the area under and around the switch to make sure nothing is preventing it from moving. After the button is sufficiently cleaned, try moving it into position once again. Try using this troubleshooting page

Chosen Solution Last week my device starting making a squealing sound after an hour of use and I don’t know what exactly started the problem. This might mean the bearings of the fan is faulty, this problem might also cause overheating issues. More information can be found here.

Chosen Solution i took my iphone apart to make a repair to the plastic cover. i put everything back together and it was working just fine, but later the same day it died and sense then the only thing that comes up on the screen is the red battery charging sign when i plug it in. Did you replace the battery? If so - try reinstalling the original battery. There are more poor quality batteries available than original high quality....

Chosen Solution Please help! It’s a JBL sound bar. The music will just turn on randomly, when it’s off. It got louder as I tried to turn it off. It’s music I don’t listen to. it’s about 2 years old, I got it from a friend that lives 6 hours away. It’s freaking me out! Is there instances of speakers doing this? Should I get rid of it? Please help...