Chosen Solution I have a White Outdoor LT-1855 H Lawn Tractor with a 18horse Briggs and Stratton engine. I started having a problem with it shutting down after running for a while. Seems to shut down when it gets hot. It will run fine and I can mow for about 15-20 minutes then it shuts off. If I wait for a while for it to cool it will crank and run for a short time (maybe 3-5 minutes) and shut off again....
Chosen Solution I have dropped my phone but it’s never done this now I have lines running through it they change the color of stuff on my screen too Please provide us photos of the condition that the phone is currently in, especially if there is any damage to it due to the drop. That would be really helpful. Although, my instincts say that the LCD/Digitizer will need to be replaced....
Chosen Solution Why would both of my toilet bowls keep losing water? They flush fine, empty out and fills back up fine but after a bit of time I’ll go back in and the water in the bowls have gotten really low. I’ve checked for leaks nothing there & the wax rings are fine I’m just losing water out of the toilet bowls and I don’t know how or where it’s going....
Chosen Solution Hi, i have just bought a a1138 powerbook g4, i was testing installed apps then, system got frozen, i pushed power on button and hold until it shut down, now it don’t startup. Powers on but: No chimesSleep led is onSuperdrive spins in cyclesBattery chargesIf I push the shift key its LED lights on and then offSeems that no reaction to any key booting options like secure mode or reset nvram …If i remove RAM , it starts and sleep LED blinksI tried removing the RAM tooIf i hold power on button, all fans run and then same behavior....
Chosen Solution it will run threw the wash cycle then with 1 miniute left it stops?so my clothes are still wet.how do I fix this? Cause 1 Lid Switch Assembly The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity....
Chosen Solution When I play call of duty warzone it would be ok first couple of games but sometimes it would stop for a sec and the fps would be at 1 and my latency would be at like 993 Update (11/14/2022) I took picture to show what I mean Hi @zeelan1222 Try performing a ping test to check if it is a problem with the router or perhaps to the CoD Warzone server that you’re connected to when experiencing the problem....
Chosen Solution I erased my hard drive once before selling it but to be safe, I decided to do a secure erase and now the person is not able to install the software to get it up and running. Help please When you erased the drive you removed the OS files as well. You’ll need to aim your friend to this Apple TN: About macOS Recovery or give them a USB thumb drive configured as a OS installer following this guide: How to create a bootable macOS High Sierra installer drive using your new system
Chosen Solution I have an iPad 2 WiFi suck in a boot loop… I think. It won’t boot and will stay on the Apple logo for a bit and then turn off. Battery holds charge. hello Tsar, yes, that what you have got, we call a boot loop, because loop is never ending. One or few components have a short in their circuit so it makes a signal reset to zero....
Chosen Solution My LG Aristo just started not charged with my charging cord what can I do to fix this Hi @ruzoc , Hopefully one of the suggestions below will help to resolve the problem Have you tried a different compatible charger? Have you tried a different charge cord? Have you tried connecting the phone to a known working USB port on a computer to see if it charges? Using a strong light and a magnifying glass check the phone’s micro USB charge port enclosure to ensure that all 5 pins are there....
Chosen Solution So my cat had knocked over a cup of water on my phone, but it wasn’t a lot of water. It mainly got on the case, but I still ended up getting water damage. I put it in rice only after a few hours when seeing that the phone started acting weird. Will my phone be salvageable? How long should I leave it in rice for? Will I need to purchase a new phone?...
Chosen Solution My screen a while back had suddenly switched to opposite colors (black screen on white lettering) yet it is not in the negative coloring due to graphics and icons remaining in their roygbiv colors. Aside from that, my laptop runs shockingly slow. I have only ever used it for school work such as research and typing papers. I’m hoping I could get some assistance in basically resetting the laptop in hopes that it could make the laptop run any faster or go back to its original colors....
Chosen Solution Hello, I have my mom’s old phone and neither of us remember if the screen has been replaced. The bottom corners of the screen is not all the way glued or nailed into the actual phone itself. A random crack randomly appeared after noticing the pop of the screen. Along the crack is a yellow light. The yellow light does not appear any where else on the screen. What should I do?...
Chosen Solution Why doesn’t iFixIt have anything on the Huawei Honor Note 8 a.k.a. Huawei P8 Max ?! Hi, One reason may be that ifixit cannot afford to purchase every make and model of phone and tablet available on the world market, tear them down to create repair guides and then make the guides available for free. You are more than welcome to contribute to the ifixit site by creating a repair guide for a device that is not listed, as have a lot of other people already, so that it may help others in the future....
Chosen Solution my iphone 4 is not charging after 18%.but the charging icon is appearing.but it isn’t charging.i removed the battery,cleaned the ports with a brush and replaced it.but the problem is still there.what should i do? Did you replace the battery with a new one or just put back the original? For such an old device, I would certainly suspect the battery too. However, there are some really poor quality batteries on the market and depending on where you bought it (or will buy it), you have to be careful....
Chosen Solution A friend of mine lend me his Samsung S7 Edge’s Earphones to me to try out with my iPhone. The earphone works great, but, the buttons on the earphone (volume control, answer call button) WON’T work on the iPhone! You guys have an idea for why not? Or a fix to this? Thank you Because Android and iOS use different volume functions, some will work on iOS, some on Android and if you are lucky on both....
Chosen Solution I have the blender plugged in, and have made sure that there is no break in the power cord. The power light will not turn on, and the blender does not run when I try any of the buttons. The first thing I would try to do is press the red reset button on the outlet that the blender is plugged in to. If there is no red button for this outlet, look for other outlets near the outlet that your blender is plugged in to....
Chosen Solution Whenever I try to turn on my Compaq/HP Presario CQ62 (a relatively old laptop), the screen doesn’t turn on with the rest of the laptop. You can hear the fan running and the keyboard LEDs light up correctly, but the screen shows absolutely no signs of life. This happened to me a couple of days ago, and I googled a few fixes for it, and turning it on at a thirty degree angle worked that time and I didn’t have a problem with it until today....
Chosen Solution Hello! I’veen having a problem with the wifi and it’s that when I’m far from the router sometimes the internet is gone and the phone still connect to the wifi (but in another device it still work fine) I just have to turn the wifi off and on again for solve this, but I wanna know if this is a hardware problem or is the simple answer: “I’m too far from the router “...
Chosen Solution Washer was making a loud clacking noise. When I opened the lid I noticed it was not agitating. I tried to drain and can’t get it to drain either. @kara1 the loud clacking noise could come from a bad belt, bad motor coupler or bad clutch. If you can give us the complete model number we can hopefully provide you with some guides to work on this. Without the noise I would have suggested you start with the lid switch, but that would not give you a noise....
Chosen Solution It begins POST but doesn’t finish. It ends with cursor blinking in top left of screen. There are no beeps. It won’t enter the BIOS setup. Control-Alt-Del won’t restart it. I have to hold the power button down to shut it down and then restart. Hello, if you haven’t tried resetting the BIOS you should. If you don’t know how just follow this instructions:
