Posts

Chosen Solution I left my tablet charging for 4 hours and it still has not charged from the micro USB port? The micro USB port on the tablet is not specified as the charging port. Rather, the smaller round port to the immediate left of the micro USB port is the designated charge port for the Polaroid S10 tablet. Try plugging the charge cable associated with that port into the tablet and see if the tablet charges once it is plugged into a power source....

Chosen Solution There is no power to the Roku. If your Roku device will not turn on, the first thing to do is to make sure that the device is plugged in and that the power cord is seated properly. If you’ve done this and it still won’t turn on, don’t panic. You can consult the Roku XD troubleshooting page for more possible solutions. From Roku troubleshooting: Roku XD 2050X Troubleshooting Remote and Roku Need to Be Reset Remove batteries from the remote....

Chosen Solution Hi, I got my Apple Watch today, but it has a white strap. I reckon this will become grey in a short space of time, so I wish to use a different strap. It’s also nice to have options to customise the watch, but the actual Apple straps are quite expensive, at around £30+. If I get a cheap £4 strap off eBay, is there a chance of it loosening the connectors that hold the Watch in the straps?...

Chosen Solution hello the team I hope you all go well I have a very big problem every time I want to remove a nand on iphone 5s (repair error 4013) or ipad air 2 (remove icloud) I cause damage to ic ic left and capacitor right please have you a technique because I desespere :( ps: I can not stop removing the black glue around Hi Mike. Before heating u the NAND, you need to scrape away as much underfill as possible....

Chosen Solution My radio sound just stopped but everything works like it should. Hi, What is the year model of the vehicle? Check if fuse #17 (15 Amp) in the passenger compartment fuse box is OK. This fuse supplies power to the audio amplifier in the vehicle. If it is blown then there’s always a reason why a fuse blows, so be aware that it may blow again, either immediately or soon after it has been replaced....

Chosen Solution Jbl sb450 soundbar turns off itself after a variable time period , and it plays loud so i dont believe its a “no signal issue” Maybe the problem with installing all the hardware?

Chosen Solution Hi, just tried to replace the SSD with an Intel Pro 6000p OPAL SSD M.2 PCIe x4 NVME SSD and adapter. But, the SSD will not show up in the Disk Utility. Any Ideas, why that is not working???? It’s not built for use in a Mac. Even if it does work, it’s unstable. Go with one built for use in a Mac. OWC and Transcend make them. 15" Late 2013 - Mid 2015MacBook Pro 11,2 / 11,3 / 11,4 / 11,5 JetDrive 855 / JetDrive 850 / JetDrive 825 / JetDrive 820 https://us....

Chosen Solution steam is escaping from the lid Mine is doing this, but I think the problem is that I made a few stupid errors: #1 I did not pay attention to hard water deposits–cleaning them out regularly. Instead, I didn’t do it for the entire time I’ve had it. Needless to say, those deposits have been forming for years. I’ve had my little machine for soooo many years (mine was made in Switzerland, if that gives you an idea–I think I’ve had it for over 25 years)....

Chosen Solution After a while of use, my DS4 controller would not charge via the USB port. I purchased a USB port replacement, but found that the controller still would not charge, even though with the new part (as with the old part, in fact) the LED would light up for things like pairing and connecting via Bluetooth (though it would not light up orange for charging). Furthermore, the LED would only light up for the above scenarios when plugged in via USB....

Chosen Solution Hey! So I followed the guide here on iFixit to replace my battery. Unfortunately now my Surface Pro 4 won’t turn on at all (unplugged or plugged in). Nothing happens, not even the fan goes on. I can’t really figure out what the problem might be. Maybe someone can give me a clue where to look next or what it might be? A few more notes: When I tore off the screen I broke one of the three antennas at the top, but I would guess this wouldn’t cause this problem....

Chosen Solution Is the keyboard/screen/trackpad of the Macbook Pro from 2011 (MC700LL/A ) interchangeable with a Macbook Pro from 2009? (MB990LL/A) I thought they’ll work since they’re all similar models with the same model number (A1278). Extra Info: I have 3 devices. Two 2011 Macbook. First one has a non working keyboard, a working trackpad, and a working motherboard. The second one has a partly defective LCD, a working keyboard, and a non working trackpad....

Chosen Solution My iHome was working just a few hours ago but now when i play music, the left speaker doesn’t seem to be playing at full volume. It also sounds muffled and I am not sure why. Your woofer could be obstructed by something. Take the protective grill off of the front to make sure nothing is touching the driver. Also, check the hole on the back of the speaker casing to make sure there is no debris in there....

Chosen Solution When I play a shooting game (or any game) my controller isn’t being touched but my screen is showing straight up. It’s like I’m pushing my right analog stick forward but it’s not being touched. @yates16 …your stick drift is being caused by a faulty/broken thumbstick. these are not hard to fix. here is a link to the parts and a guide on how to replace: DualShock 4 Right Analog Stick Replacement

Chosen Solution My computer frequently gets very hot while the fan is running hard and I don’t know why! I am doing relatively simple tasks that shouldn’t make the computer work so hard. Help! Alex, it may be time to disassemble your laptop and give it a thorough cleaning. Dust and small debri builds up on/around the fan , heat sinks and other components on the laptop boards reducing cooling efficiency badly....

Chosen Solution when i turn on my ps3 it works well but while im playing online in call of duty mw3 it starts making so much noise like a vacuum it ! That’s the fan. The super-slim has next to no ventilation so it can overheat quickly (especially if it’s working hard & vents are not cleaned often) Additionally the thermal paste might need replacing, if you are tearing down to clear the fan out properly, you might aswell check the paste hasn’t dried up while you are in there....

Chosen Solution Whenever im backing up in reverse, my camera on my car does not work it says “Check Entire Surroundings” but the screen stays black. Does anyone else have this issue? Hi @nanaaa626 , Online research regarding your camera problem shows that it not that rare a problem. Just search for (insert year of manufacture) Chrysler 300C rear camera problem and you’ll see the results. There are four possibilities in order from most likely to highly unlikely; a)....

Chosen Solution My conservator washer sensing light flashing. But if I put heavy bottles on the lid it will complete the cycle. I’m thinking it’s the lid switch, any guesses? Tanya Warrick since it works with some added weight to the lid it does sound like the switch. It may just be needing to be realigned with the contact etc. Let us know the exact make and model for your washer

Chosen Solution how to solve it this problem Hi, Not certain if it is the same in your phone but see if adjusting the Touch and Hold delay setting helps. It may be found at Home Screen > Settings > Accessibility >Touch and Hold Delay tap to enter and select ‘short’

Chosen Solution Dear community, I recently had issues with the port replacement: (Why isn’t my phone charging?) Upon re-activating my battery, the phone turns on again. I doesn’t, however, charge. It is hovering at 1%. The display turns on when I plug in the charger. I do have another spare port I could put in but am not sure that’s the issue What could be the underlying issue? Tristar? Many thanks for your help....

Chosen Solution The music on my phone is not playing through the Swagtron’s speakers. To turn on bluetooth, power on the Swagtron. Powering on the Swagtron should automatically turn on bluetooth on the hoverboard. On your mobile device, turn on bluetooth, then search for “Swagtron.” Select “Swagtron” to begin connecting. The Swagtron will make a sound when the devices have been successfully paired. To end the connection between the devices, turn off bluetooth on your mobile device....