Posts

Chosen Solution I dropped my iPhone 7 Plus about a year ago and the screen was badly damaged and cracked. I’ve noticed that dust has gotten inside through the cracks of the screen and I wanted to see if Apple will clean the inside of the phone if I ask them. I haven’t taken the phone apart or anything. I asked on the Apple community and all they kept saying was that Apple might not replace the screen because of the dust which sounds completely ridiculous....

Chosen Solution I have a 1991 honda accord ls automatic. Replaced the starter solanoid assembly (all in one piece) after trying to start the car and got nothing but “click,click,click” when turning the key to the start position. Still had that issue when i replaced it, my grandfather “jumped” the starter (as he called it) by using a screw driver to connect the wire that goes from the key in the ifnition to the other wire, it made a really loud grinding noise and started after that, we let the car run for a few minutes then shut it off to try and start it again, “click click click” so he did it again....

Chosen Solution Hi there. I was replacing the battery for my 2017 13-inch mbp. The new battery I got didn’t come with a ribbon cable, so I had to use the old one to connect the logic board and the battery. However, the latch of the ZIF connector on the battery fell off. I still have the latch (the tiny black comb-like thing) but I’m not able to put it back....

Chosen Solution I have a 3HP V-Twin air compressor, made in China. It is badged Warrior, but I can’t see any model number. I am trying to renovate this, and will no doubt need some spares if only gaskets and o-rings, but maybe also valves, piston rings etc. Does anyone know where I can get these from? Does anyone make generic spares for compressors? Or can I get spares from somewhere in China?...

Chosen Solution Hello, my tv is having this weird behavior every time i open any menu. The panel is fine, it is not damaged and as long as i watch cable tv, everything is fine. Tv glitch Thank you very much. Thanks for the picture it helps. Can you also verify that the model number is 55UF8507? What you are seeing is often called digital noise. If the standard use of the set is working as expected, then I would suspect that there is a problem with the main/logic board....

Chosen Solution Hi, I desperately need to speed up my late 2009 iMac, I see that adding a SSD drive does not seem to be possible unless I add it into the optical enclosure. The questions I have are: Am I correct that I cannot replace the existing WD drive with a SSD? If I add the SSD using the optical drive kit, can I set this to be the boot device....

Chosen Solution Any chance of a guide showing how to swap the stock PS3 Slim HD for a SSD? SSD and hard drives should be detected the same as of what the PS3 should see. You should be able to just follow a hard drive update guide and have it work fine. Good luck and let us know if everything works. I swapped out the 60GB HDD in my 2007 launch PS3 for a PNY 128GB SSD....

Chosen Solution My Macbook 13" early 2008 will turn off 5 minutes after i unplug it even though i have almost full charge or full charge. I checked the battery usage it said normal. What can be the case? How can i fix it? To get a better idea of what is going on with your battery, download and run Coconut Battery. http://www.coconut-flavour.com

Chosen Solution So I was checking my bag, when I pulled out my clothes from my bag, my phone fell, but I dropped it when my bag was low near the ground, I used the phone in a bus, it worked, but when I was at home, and I couldn’t press anything, when I click it, it doesn’t work, the back and the other button works though. If I try to restart or power off, it doesn’t work because I need to touch either the restart or power off, holding the power button for 10 seconds it didn’t get powered off, can someone help me?...

Chosen Solution Everything running perfectly, but now after I fed the lines in as described for replacement, I push the trigger, the head spins and then falls off into 2 pieces. The metal cap (see below that this may be an adapter) that the head screws up to and the head itself. I screw the head back on ok after I put the cap up first, but it keeps happening. No idea....

Chosen Solution I bought an iPhone for repair online and replaced the screen and lightning port it works other than the loud speaker doese’t work. I replaced it with a loudspeaker froma working iPhone 6. The iphone does have water damage If it has been liquid damaged the speaker amp ic would be the culprit. U1601 will have to be replaced.

Chosen Solution Why is it recommended to install an SD card into the SD slot when replacing a logic board in a MackBook Pro (13 inch, Early 2011)? I have replaced a lot of logic boards in MacBooks and I have never used an SD in any of them. All of the instructions I used from the internet never mentioned the use of an SD card when replacing the logic board....

Chosen Solution I have a Macbook Pro and my problem is that when I hit the power button it seems like it’s going to turn on and I can hear the sound of the fan, the cd-rom and also the hard drive start if I keep the power button pressed down. Once I release the power button, the computer shuts down. If I just press and release the power button the light indicator just flashes as if it wants to start, but it shuts down immediately....

Chosen Solution ok now my dryer is over heating on all cycles?? what would be causing this problem.. replacing the thermal fuse made the dryer run a cycle but only HOT air is coming out.. when the cycle is done the clothes are too hot to touch.. please help Nena, this could be caused by a bad thermostat or a failed thermal cutoff/ The thermal cutoff is a non-resettable device. The cutoff temperature is 178°C (352°F)....

Chosen Solution My mid 2012 MacBook Pro 15" keeps shutting down and restarting. I changed/upgraded ram cards from 2 gb each to 4 gb each, and put in a brand new solid state drive because I read quite a lot of articles and forums that state that would stop the problem. It is not getting hot. I have reset PRAM, SMC, and NVRAM. If you need, I have saved the most recent panic report....

Chosen Solution My Macbook Pro has the trackpad bulging out and i googled to see if i could find out the problem. lots of people said its the battery thats bad, but i was wondering if i also need to replace the trackpad or if it would still be good to use with just replacing the new battery? If the trackpad has not cracked it is most likely still good. But get that battery out before it does more damage....

Chosen Solution So when I turn on my Xbox then about 4-7 seconds it turn off? I’m think it’s something with the motherboard or the power supply this started about a week ago and had my Xbox over a year now. Could be one of several things—read through the Xbox One Turns Itself Off wiki and see if it helps you find the problem! Hello friends, so I had this EXACT same problem with my Xbox....

Chosen Solution Hi, Today just appeared a black spot and line on the display. This display was replaced 6 months ago and now is presenting this spots. Which could be the reason of this spots and how can be fix? Thank you. Huh, that is weird. Doesn’t usually show up like that. It’s damage to your lcd. iPhone 6 LCD and Digitizer iPhone 6 Screen Replacement You’ve damaged the LCD panel, looks to be an impact mark, just follow the guides listed by @imedicminneapolis above !...

Chosen Solution Wi-fi,bluetooth and radio does not work on my phone. How can I fix it? If you have a custom rom, try flashing another kernel. And if stock rom, reflash it again with flashtool program. Wifi, bluetooth, ant+ and likely radio as well are all handled by a single chip: Texas Instrument WL1271, so all of them failing together likely means this chip is somehow faulty on your Ray (and mine too)....

Chosen Solution I just got a new blackberry curve. For some reason it won’t charge. It does not have water damage. I went to the phone company and they said I need a new battery. I got a new one and it still won’t work.I tried the new battery because the warranty is up and do not wish to get a new one because of the minimum fees that apply when buying it....