Chosen Solution I recently cleaned my Xbox one, it was extremely dirty but worked fine. After I cleaned it, the console started having trouble, I will turn on my Xbox and receive a message telling me about the ventilation and to keep anything away from it or else it’ll overheat and turn off, then it’ll shut off after a minute. I don’t know why this is happening even after it was cleaned, the fan spun nicely too, any help on this?...
Chosen Solution I bought a used MacBook Pro 13" A1278. The trackpad responds fine as far as moving the pointer but will only click on something by tapping in the bottom center of the trackpad. I don’t feel any swelling of the battery. I’ve tried the following things that others suggested: -using a razor blade to go around the edges of the trackpad -using alcohol around the edges of the trackpad -holding down option, command, p, and r keys while starting the laptop -pressing hard and holding all around the trackpad -hitting the trackpad in various spots Any ideas as to why this is happening?...
Chosen Solution About a year or more ago I noticed that the little light on my magnetic charging cable no longer lit up when attached to the computer. When I jiggle it, it will eventually light up and show either green or orange (depending on how much of a charge it needs). However, it will very shortly go dim (and sometimes go totally out) and sometimes it doesn’t charge my battery....
Chosen Solution The connector of the MagSafe heats up whiles it is unplugged from the MacBook. The led light does not show up when plugged and heats up as well It sounds like it has an internal short. Repair is very difficult. On this one I would replace it. Check to see what wattage it is beforehand.
Chosen Solution i replaced the screen on my iphone 7 plus and the new one doesn’t work but the old one still works the new turns on but it black When you say “it turns on but it is black” you mean you can see the backlight being powered but there is no picture? In that case it is likely a faulty display. You could try reseating the connector for the display, but it is likely connected since the backlight is receiving power....
Chosen Solution I have a 1998 furby and when I put in new batteries in it it won’t start again even when I press the reset button! I don’t really want to take the fur off and touch the motor etc i was wondering if there was another way! Can you please help me because I love my furby and I don’t want it to die! Try pressing Furbys reset buton located in its battery compartment on the side....
Chosen Solution I have an iPod touch 4th generation that does not turn on, and the screen will will turn white for as long as I hold down the power button, then go dark again, wondering if there is any easy way to fix it, or if it requires board repair. Check that you have firm cable connections. Remove any debris from all ports. Try a different charging cable, power adapter, and power source....
Chosen Solution damage when it full down when the touchscreen does not respond after the phone fell down, it’s very likely that the touchscreen is cracked or the connections are loose this is the guide how to open the iPhone correctly and checking/replacing the touchscreen here you’ll find the touchscreen with all the tools needed to replace it
Chosen Solution When I go to down load the pics from My Canon 350D the card will not be recognised. I have tried a new card reader and have tried new cf cards on PC and imac, but neither seem to detect the card. Many thanks. Computers do not “recognize” drives (memory cards is essentially a thumb drive) due to formatting (MBD) issues. That neither a PC or a Mac can read the format could be caused by a camera writing a proprietary format, or the card being damaged....
Chosen Solution The touchpad on my MBP makes a “click” sound but doesn’t actually register the click. It’s infuriating. I bought my MBP in September (five months ago) and this problem appeared about two months ago. It progressively got worse, until I was unable to draw in Photoshop, drag windows around, or resize stuff. What a pain. And pretty disappointing for a brand-spankin-new Apple laptop. After the quarter ended and I could be without it for a while, I had a genius look at my laptop....
Chosen Solution Where can I source a new or used display for this model (A1534 EMC 3099) Macbook? I checked ebay and found only one listing that wasnt confirmed working. They only sell screen assembly’s but you can buy MacBook parts here https://www.ifixit.com/Store/Mac/MacBook
Chosen Solution I’m not sure what to do I accidentally spilled a little bit of pop on the cords and it comes on then the screen goes blue, help me Turn it off. Wait for it to fully dry and try it again. If it still doesn’t work you’re going to want to take it to a pro.
Chosen Solution Hey guys! I just pulled the HDMI cord out of my mac and then a 1/2” of the left side screen running vertically is blacked out. in the bottom of the screen 5 white lines are running horisontal. Besides that it looks like the screen has been pressed and broken in the bottom left corner. All this appeared just by removing the HDMI Cord. Do you guys have any ideas to why this is?...
Chosen Solution Say I have a insignia Fire TV 24in. And the screen is out can I put all the insides of it into a 15in lcd ampd tv and use its screen????if so will u please help me Jason Maguire without actually seeing it, I highly doubt that this is possible. First off there should not be any room in a `15” chassis to accommodate the boards from the 24”....
Chosen Solution The sound from my speaker is fuzzy and unclear. Even when the sound is not at full volume, it is warped and unpleasant. It is possible that there is damage to the speaker. A damaged speaker can cause a fuzzy or static noise to come out. Another possibility is that your device might be too far away from the speaker, causing it to disconnect.
Chosen Solution I’ve had the NABI Big Tab for about 6 months and it just started restarting if self after running for about 2 mins. I have done several factory resets and that has not fixed the problem. Please help!! Hi @rytomlin , There is a 12 month manufacturer’s warranty on the tablet. Consult the warranty statement as to what you have to do to make a claim for a manufacturer’s warranty repair, replacement or refund....
Chosen Solution a car run over my xiaomi pocophone f1, i replaced the screen(and frame) and then for few minutes anything seemed to be ok, but then i lost signal and had no network and cellular connection(the network sometimes works for a while and sometimes not). this IS NOT a software problem, and i’m pretty certain that this problem caused by damaged hardware. i opened the phone and inside everything looks fine and fully connected(antenna etc), but maybe my eyes are wrong....
Chosen Solution When I turn the vacuum on, dust comes out of the vent on the back of the unit. The blue filter sock that fits over the cage inside the vacuum has probably been removed for wet vacuuming or may have slid down enough to let debris through. This trouble shooting guide may help, but I’d check the filter as a first step.
Chosen Solution my printer prints everything that should be yellow as pink. what is causing this and what can i do to fix this . i have replaced both cartridges. Hi, I assume that you are referring to a Kokak ESP C315 printer? Does the problem also occur when you try to copy an appropriately coloured document or image using the printer’s control panel or only when you try to print from a connected device or both?...
Chosen Solution I have to charge my phone multiple times per day, but the battery used to last a lot longer. The battery also drains quickly even when I’m not using it. If your Keon is having trouble holding a charge your phone may be over working itself if you have too many apps running or too much data on the phone. Some things you can do to improve battery life are to remove unused apps and delete unused data....
