Chosen Solution I have taken apart my PS4 to see if it was real dusty inside and see if there was something preventing air from circulating in it. I couldn’t see anything The fan gets super loud whenever I load up a game and it gets in a graphics intensive area. (MLB the show, when you’re at the stadiums). I didn’t take off the heat sink.. that’s my only other assumption?...
Chosen Solution My ps3 slim will only work for about 15 minutes. Then it shuts off. No lights or beeps. One spot near the back in the power supply feels warm, not hot. Any ideas? http://www.youtube.com/watch?v=84oXv9w8_…
Chosen Solution Even when off, there appears to be a large blemish within the screen. There doesn’t seem to be any physical damage. What is this? There is either water damage or the liquid crystal display (LCD) is damaged. You will most likely need to replace the screen. Please follow the screen replacement guide.
Chosen Solution I have an iphone 7 that is restarting randomly. I noticed that the phone is rebooting when i plug it to charger, also when this happens tha phone is getting hot, that doesn’t always happen. It’s shutting down and restarts, then i need to enter passcode an then it happens again. I checked the logs and i find the following error. An iPhone that randomly restarts when not using any apps usually indicates a parts problem....
Chosen Solution My shredder backward works but to actually shred paper it doesn’t. cleaned the sensors twice to no avail took apart and cleaned everything but to no avail please help someone its a pain to take apart this thing. @jubear use a multimeter and test the directional switch on your shredder. Make sure that the forward part of the switch works.
Chosen Solution Red lock light is on and I cannot start my dishwasher. How do I unlock? For future reference, if the red “LOCKED” light is on and you have reset the circuit breaker, you have tried holding the heated dry button for 4+ seconds, you went from alternatively pressing the “Heated Dry” “Normal Wash,” Heated Dry," “Normal Wash” and “Cancel” buttons, with no luck and are ready to throw the whole thing off a 50 story building or set it on the railroad tracks, there’s one more thing that you can do and odd as it seems, will work where these others have failed....
Chosen Solution Five month after i bought it, the screen starting flickering like in the video posted here (http://www.youtube.com/watch?v=FhDMnHqB3…) and then it turns black or very dark, Things that i tried: 1- Restarting (didn’t work) 2- Tilting the screen (didn’t work) 3- Resetting the PRAM (didn’t work) 4- Repaired Permissions (didn’t Work) 5- Opening in Safe Mode (Worked) - So i thought it was a software problem not a hardware one, and after reading a lot of forums i narrowed it down to a version bug, so i replaced the system with the original version that came with it (10....
Chosen Solution Any time I press the power button the light blink for about 2 seconds and turn off back again. What can i do to fix this problem? I’m out of warranty. I just had a similiar issue. It could be anything. It could be a failing motherboard, failing power supply, bad ram, anything really. A good place to start is to remove the side case of the computer and then remove and reseat the ram....
Chosen Solution On my wife’s iPhone6, I was inspecting the bottom microphone. Basically the bottom mic stopped working to pick up speech. it would pick up blowing directly on it but not speech. Anyway I decided to remove the pentalobe screws, open the phone and then remove the microphone support so I could inspect the microphone hole. The phone was repaired once by a local shop before. The microphone support screw came out normally but when I went to replace it, the screw would not bite into the bottom board....
Chosen Solution I was using my camera the other day and suddenly it shut off and would not turn on again. I’m not sure what’s wrong with it. Ensure that the four AA batteries are properly inserted in the camera with the positive and negative ends of the batteries pointing in the right directions. Additionally, make sure the battery cover is completely closed and shut properly. If still no success, try removing and reinserting the batteries, or replace the batteries entirely if your Kodak Easyshare Z981 still doesn’t turn on....
Chosen Solution I’m trying to put my phone into recovery mode but when I hold the home button and plug it into the computer it just starts up like it normally would instead of going into recovery mode. Can anyone tell me what I’m doing wrong? Keep the phone plugged in. Hold home and Power for 8-10 seconds or until the phone turns off. You may need to hold the power button again for a few seconds to make sure the phone switches on again while plugged in....
Chosen Solution The digitizer seems to be poping out of the body near the bottom. This started happening after the replacement. Is there a certain way to fold the flex cable? This does sound like the ribbon may be pushing up on the digitizer. It happens when the digitizer flex ribbon is bent in the wrong direction when the digitizer is installed. It’s really common when replacing ipad screens, and the minis are especially a pain....
Chosen Solution Recently swapped out a cracked and bent screen assembly with a new one from iFixit. And now my macbook wont automatically go to sleep when i close the lid. It will sleep manually though. After my understanding there is a magnetic sensor in the lid. Could this be faulty? I’ve tried clearing the NVRAM and doing an SMC reset, however if the SMC reset was sucessfull i dont know as there is no physical representation on it’s success… Any ideas?...
Chosen Solution fit i pod bren82 I just checked the installation and user manual and it does NOT appear that you can hook your iPod up. It has audio out but no audio in You can check the manuals on here Good Luck
Chosen Solution somebody tell me whats wrong with it as it turns on but only to the logo manufacturers logo on the screen &says powered by android. I tried doing a factory reset. nothing… did looked for new firmware to flash on it?
Chosen Solution My TV does not power up, Sony KDL-52XBR9. When plugged in and power button pressed, I hear a relay click 4 times then it turns to blinking red LED 10 times per cycle. Is this worth repairing? What board needs to be replaced? Try a reset procedure first if you haven’t already. Unplug the TV power cord from the wall outlet. Disconnect all devices connected to the TV.Wait one minute and then plug in the power cord to the wall outlet....
Chosen Solution My Dell Inspiron 15 does not turn off laptop speakers when I plug in my ear phones. Was wondering why this happened all of a sudden. Try checking your playback devices by right-clicking the sound icon in your taskbar, and selecting your headphones. If this doesn’t work, check if you have the proper drivers installed, or try uninstalling the current driver and reinstalling it.
Chosen Solution Washer is draining and spinning but clothes are still dripping wet. Takes 2 or 3 extra spin cycles to get them drained enough. Drain hoses and water pump are clear of clogs. How do you know if a water pump does not work? Update (07/23/2018) I have attached a picture. Please let me know if it does not work @niefs that sounds more like an issue with the drive for the spin mode....
Chosen Solution cant do anything after startup repair. after i select finish computer shuts off Hi, If you have Win 10 installed try repairing the startup using a Windows recovery USB disc. A recovery disc can be created from any known working Win10 PC. You will need a 8GB USB flashdrive and 40-60 minutes of time. In the host PC go to Control Panel > Recovery > Create a recovery disc and follow the prompts....
Chosen Solution Hello, I have Macally Ice Jr I would like to repair. These are no longer being manufactured and cannot purchase a new one. The mouse appears not to have any power when connected to computer. Jiggling the wire or male side to the computer does nothing. Any help would be appreciated. Hi @markd123, First thing to do is to open the mouse and then use a DMM’s (digital multimeter) Ohmmeter function to prove the continuity of the mouse’s USB cable wires from the plug to where they’re connected to in the mouse....
