Posts

Chosen Solution After changing the spark plugs and replacing new engine oil I found out that my car has been smoking profusely since then what could be the cause and the solution. Thanks if you have not changed the oil in a very long time causing a build up of dirt on the rings and causing them to wear . When you put new oil in this cleaned the rings and now with the wear its letting oil pass the rings and this causes the smoke....

Chosen Solution why is my picture showing only in black and white Go to settings/general/accessibility/grayscale , turn off if it’s on. Worked for me it got turned on doing one of my exploring moments. Generally, if your TV picture is only in black and white, the cause is usually an incorrect/inadvertent connection to the TV from your video source. Or, a loose connection can cause this also. So, check those connections carefully....

Chosen Solution signal works intermittently or not at all. new flasher didn’t help new signal arm didn’t help. what do I do? Check the bulbs and sockets of the signal lights(on all four corners of the car) paying close attention to the grounds of each socket.

Chosen Solution Tablet is frozen on the home page, any help would be much obliged. If your device is stuck on the home screen, it might need a hard reset. Hold down the power button until the screen goes black, then power the device back on. The problem should be fixed at that point.

Chosen Solution Right after it fills it makes a really loud noise, when I stop it a couple times and start it back up it will get a little quieter. If your Kenmore 110 Series Washing Machine is making strange noises, see the Kenmore 110 Series Washing Machine Makes Unusual Noises problem page for possible causes and solutions. Cause 1 Tub Bearing The tub bearing is mounted in the middle of the outer tub....

Chosen Solution Why is my Kurio Xtreme not producing sound? It seems that I cannot get my device to make any sound. Check to make sure that the volume isn’t turned down. The problem could also be that the speaker is broken, so consider replacing it. Another potential explanation is that your Kurio Xtreme has a software malfunction. Try resetting your Kurio Xtreme by turning it off, pressing the reset button, and turning it back on....

Chosen Solution When the computer come on but scroll lock light is blinking Hi @meatat, There is very little information online regarding the scroll light blinking. So hopefully the problem can be diagnosed. Is the fan running and can you feel the air coming out of the fan vents (which should not be clogged) when you start the laptop? Does the laptop boot successfully all the way to the Windows desktop?...

Chosen Solution Got a mini 2 cellular tablet from a friend that said someone replaced a cracked digitizer but then the tablet wouldn’t turn on. So now I’m looking at it and when i took it apart the battery connector didn’t seem fully connected in. I checked the ipad with a tristar tester and everything was ok but it said the battery wasn’t connected.After i disassembled it it took a charge with high amps 2....

Chosen Solution When I step on my board and try to accelerate, nothing happens. I’ve made sure both the board and remote are fully charged and still nothing has changed. Is there something else I can do? It is possible that the connection between the remote and the board isn’t working. If that works try checking if the belts are broken or that the motors are worn down. For more information check the troubleshooting guide here

Chosen Solution The Roku has power and displays video, but there is no audio. No sound to your video? We’ve got you covered. While we aren’t trying to insult your intelligence, make sure that the volume isn’t turned down too low and that the mute function isn’t activated. If this didn’t solve the problem, you can consult the Roku XD troubleshooting page for more possible solutions. If you can see video on device, but not hear any audio, first make be sure that the audio cables are properly connected to both your Roku player and your TV or AV receiver....

Chosen Solution I connected my usb cable to my computer but the connection icon won’t show up in the status bar and my phone won’t show up on the computer, either. It stays in charge mode and I don’t know how to access the usb connection options or what is wrong. Hi, Don’t know the setup of your particular phone brand. In this regard different brands can vary as to the location (if any) of the USB connection options....

Chosen Solution I recently replaced my iPhone 7 screen and kept the Original home button after booting up the phone the home button won’t work and it says unable to activate Touch ID why is this ? And can I fix it? The iPhone 7/8 series have a very inconvenient bend on the Home Button flex. It’s really easy to tear the flex, either near the logic board connector or at the 90 degree bend before it sneaks underneath the LCD heat shield....

Chosen Solution will my MSI 1050 ti mini fit into my HP ELITEDESK 800 G1 by any chance? Hi @rbick You don’t state what model HP ELITEDESK 800 G1 you have, tower case, Small Form Factor or Ultra Slim Desktop. If this is the graphics card you’re asking about, its’ dimensions are 182mm x 69mm x 35 mm so it should fit in the TWR and the SFF case with regard to the height of the card but it will not fit into the USDT case as the card is too high....

Chosen Solution Hi, My iMac is connected to an UPS and I had shut it down last friday before leaving on a business trip. Once back home, I tried to power it on and it simply wont :( When I hook the power cord to the socket(both UPS and direct), I hear a buzzing sound from inside the iMac. Once I press the power button, I hear the startup sound and then it powers off....

Chosen Solution I want to replace my iPhone 7 home button flex cable, and I was wondering that the touch sensor will work or not? If you replace the flat cable that has the button attached to it, you will loose both Touch ID and Home Button functions. Your button will be a useless fixture. If you replace the screen extension cable that is part of the backlight panel (and doesn’t have the home button directly attached to it), you don’t loose your Touch ID function....

Chosen Solution How can i connect my sony xperia tablet S to sony pc companion? I want to backup and restore my device given that it is becoming too slow horacio, that should be explained in your user manual. Check this site to download the manual.

Chosen Solution I had a crackling noise from one speaker on my mid 2015 Macbook pro. Bought a replacement from iFixit, changed it and all was well for about a month or so. Now the exact same crackling has reappeared on the same side again. I dont run full volume music or anything like that. What could be happening? Let’s see if we can make sure the issue is within the speaker or some other part of the audio circuit....

Chosen Solution Why is it when i use my speaker phone I can barely hear as well as listening to music? I use speaker booster…BEST!!! #omega Try Downloading Sound About app. if this did not work then may be speaker of phone has some problem

Chosen Solution I bought 2 Samsung Galaxy Note 3 smartphones, both with cracked screens and ordered a screen + digitizer(this one: https://goo.gl/mLvzAM) and replaced the screen according to this video(https://goo.gl/NwE3Mv) and all worked well during testing and left the phone on the whole day and night. However, when I should open the screen to use the phone there was no screen. I felt vibrations, the blue, red and green Led ’s are functioning and if you look very good you see the apps and images through the dark screen, so there is not enough light to let the screen function....

Chosen Solution I cleaned my sony 50 inch with spray and cloth and bow i can hear sound but a blank screen could nit hear sound at fitst @a5092aw The first thing to do, is to turn off the lights in the room the TV is located, make it as dark as possible. Then take a flashlight, and shine it at an angle on the screen (while it’s powered on and should be showing a picture)....