Posts

Chosen Solution I bought the Dreamtab 8 for my son for Christmas…now it just shows a blank white screen with a weird noise coming from the speakers….I put it on the charger and it shows the red light showing its charging but I can’t operate the tablet at all. I can’t even turn it off or put the volume down. Is there a reset button? What do I do? You can do a factory reset but know that in doing so you loose all data no the tablet ....

Chosen Solution Why does the traction control engage whenever I start to move does it have something to do with the antilock brakes or the wheel bearings James, Problem could be a few things bad wheel speed sensor dirty/chaffed wire/corroded plug, bad hub bearing, computer fault, etc. Take into a good shop, have checked for trouble codes, diagnosed and and estimate for repair. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....

Chosen Solution Hi. I have this weird problem with my phone. When I turn off the screen/lock it, if I turn it on inmediately or after a bit the touchscreen won’t work. It won’t respond to my pressing and I have to leave it there for a while. After a period of unresponsiveness (which can range from about 15 seconds to several minutes) the touchscreen will start working normally, until I lock the phone again and it does the same thing....

Chosen Solution My laptop says," internal hard disk drive not found. To resolve this issue, try to reseat the drive." Please help me with this. What must I do? simphiwe ntshangase this sounds like a bad hard drive. Hit F2 on startup and check to see if your drive still shows up in the BIOS. While you are there set your boot order to optical drive or USB drive. Then exit....

Chosen Solution Hello, my Toshiba Satellite L305D-S5893 was working fine last night but today the screen is dead. The laptop doesn’t gave me any sing or symptom of malfunction at all, it seems to be on, has lights on battery, charger and cd drive. The fan, cd drive and hard disk drive worked but the screen is dead, no beeps or any unusual sound. Laptop turns on with battery power and AC power, i removed the RAM memory and connected an external display but nothing changed, i tried to boot from cd but nothing worked, the screen is just dead....

Chosen Solution Tried to restore iphone 4s but keeps showing error 4013, any ideas? :) Best regards Tom. hello my all friend i have same problem on my iphone 5s itune restore error 4013 after i change the u2 charging ic is fix. try it I figured out how to fix this - this worked for both my and my friend’s iPhones. Connect to iTunes in recovery mode, start recovery. When you see the “Spinning wheel” on iPhone’s screen - EJECT THE CABLE IMMEDIATELY....

Chosen Solution I wish ifixit would post a how to replace the charge port for the iPad 6th generation, because mine won’t charge up anymore. I was able to bend the cable connector end a bit to get it to charge but now it won’t do that anymore. The charge port has felt a bit loose inside for about a year now, so I know that is the issue. Sadly, it is quite difficult to replace the charging port as it is not just a plug in and unplug setup like the battery is....

Chosen Solution Hello, my drive wont read most of my disc’s except Halo MCC, so i thought this is a laser issue, long story short i replaced the laser, but the problem escalated: none of the discs work anymore. I made some video about the problem: 1: https://photos.app.goo.gl/scLqMjYEYqKyAr… 2: https://photos.app.goo.gl/eUSTcyizRrk3Aa… I noticed that the discs wont spin up, but i can’t find information about hoe this supposed to work? So my questions: After i load in a disc the drive must to spin it up immediately no matter what else maybe wrong?...

Chosen Solution Can a GMC 1994 steering column work on a 1996 Chevy 1500? Are they interchangeable? @fredg1 yes, they are. Always remember that the experts on interchangability are the automotive parts recycler (junk yards).

Chosen Solution Old Samsung tv model JL23LED often reports it has stopped working when I change channel. This is a frequent problem and requires the tv to be turned off and on again to allow me to continue using it. @jifster double check your remote (maybe use a universal remote first) and see if that makes a difference. If it does not then this could be related to a bad IR board or a bad tuner on the main board....

Chosen Solution This happens when the microwave presses the auto cook button itself, since there is not a one touch display, I knew that the button navigator paper was glued into the memory, and I think I heard annoying beeps that the microwave doesn’t do anything, nor touched the auto cook button, the photo shows that no one touched the auto cook button but the microwave number plate itself is. Update (10/05/2020) It went worse now....

Chosen Solution Hi, My wife’s Core 2 Duo Macbook recently started having backlight problems. The light will stay on for a few seconds to minutes after waking the computer up, then shuts off. Since it shuts off without moving the screen, I thought it was probably an inverter problem, not the cable. So I ordered the part here and did the replacement. Unfortunately, after re-assembling the computer, I still have the same problem....

Chosen Solution I cannot hear any sound coming from my device when I play music. Make sure the volume is fully turned up by pressing the upper volume button. If you are on a website make sure there are no preset settings that are impeding your volume quality. If these do not work you might have to replace your speaker.

Chosen Solution the screen has been cracked for a while but it still worked last thing i did was go on snapchat which kept crashing and then the phone was dropped. @maryamk “the screen has been cracked for a while” and “then the phone was dropped” is a pretty good indication that the screen has now completely failed. That is also the reason why your phone keeps on vibrating. Replacing the display assembly should fix this....

Chosen Solution my epson artizan 1430 is printing, but printout is absolutely blank. is the problem on ink? please, help me. It sounds like you are out of ink. The only alternative is the nozzles or heads that spray the ink could be clogged or letting insufficient amounts through. That said, you’d see something at elast on each page.

Chosen Solution While game is loaded and psp is on it continues to say please wait we have changed games and it still says please wait. Try pressing and holding the power switch in the UP position for 10 seconds (needs to be 10 seconds). This should power off the system and reset the RAM. Taking the battery out for a few seconds will also achieve the same result. thanks Richdave you helpt me it works my that problem was too but now its okay...

Chosen Solution The screen is black and when the power light blinks it will beep in a morse code type- 3 short beeps, 3 long , 3 short. Three long tones, three short tones, three long tones: EFI ROM corruption is detected, and your Mac is in EFI ROM recovery mode. Newer computers automatically recover from a corrupted ROM; when this occurs, a progress bar appears on the screen during ROM recovery mode....

Chosen Solution The monitor screen is not showing any activity although the power cable is connected. First make sure there is still electricity coming from the plug in the wall, you can try using another device connected to the same plug to ensure the receptacle is functional. If this works make sure the power cable is not loose going into the monitor or into the plug. The issue may be with the power button or power supply, please refer to the replacement guide....

Chosen Solution Sometimes my tablet overheats after a long period of use or after using it in the sun. After a long period of use, it would be helpful to turn off the device to let it cool off. Also, using it in the sun, especially if the device is black, can make it overheat quickly in some instances. In such a case, protecting it from the sun will solve the problem....

Chosen Solution Hi Guys, so I haven’t used my watch for quite a few months so charged it up to use it and the date and time is wrong. I cant find how to manually set it? Ive tried the light and down button which hasn’t done anything so any suggestions would be great TIA Hi @clarabird , Here a link to the page in the User manual that shows what to do to set the time and other general settings...