Chosen Solution I am attempting to drive straight but the car keeps veering to one side. The alignment dial is most likely out of balance. To fix this issue, locate the alignment dial between the front wheels on the underside of the car. If the dial is not straight, or in line with the car, then adjust the dial accordingly. For example, if the car direction goes left, then adjust the dial to the right side....
Chosen Solution I have a Haver Y11B convertible tablet/laptop system It’s not detecting the sim card inserted in the sim slot, not even after upgrading my Window 8 to Windows 10. Window is not showing any option for cellular setting as it normally does. I contacted the Window technicians they told me I need to contact the manufacturer or claim my warranty as it is new laptop. or if there is any driver problem only manufacturer....
Chosen Solution I can not save my game progress or download any new games. This is another common issue with the Playstation TV. Most of the time it requires a system update to download new games and to save a game. Also, it could be an issue with the vita card located in the side of the device.
Chosen Solution i recently just replaced my iphone 6 battery, i followed the steps properly. but the iphone wont turn on. It only turns on when connected to a charger, and it only turn on for like 3 secs then it turns off and the process is repeated help It sounds like the battery could be severely discharged or even defective. Can you measure the voltage of the battery at the connector?...
Chosen Solution My samsung galaxy note 3 will charge very hard I have to push it in and can’t move it at all,first the charger wasn’t going and I had to push it,since then it’s been like that,please tell me what to do? Albert Einstein, to repair this you will have to replace the USB board. Follow this guide and at the end add step 7 from the teardown. There are a few different revisions of the USB board, always check with the vendor to ensure a proper board....
Chosen Solution I am new to cell phone repair and would like to get into microsoldering. I have a budget of about $200. I have been looking at the Aoyue 866 All in 1 Digital Hot Air Rework Station with Pre-Heater as well as the 992DA 4in1 SMD Hot Air Rework Soldering Iron Station Fume Extractor. Will these work for my needs? Also can I use a camera or magnifying lens to handle the magnification?...
Chosen Solution my display for a late 2008 Macbook Pro 2.66 Ghz Intel core 2 needs to be replaced. I found a used display Apple Part # 661-5483, A1286 for a Macbook Pro 6 mid 2010. Will this used one fit my 2008 Macbook Pro No use a (661-4837, 661-5091) will work. The 661-5484 is for the 2010 and has different cabling.
Chosen Solution I have a 2015 Ford Edge Titanium and my windshield defrost doesn’t blow air. Sounds like the actuator but not sure where it is located on the Edge. Hi @stewsuhr , Here are some images taken from the Ford Edge/Endura 2015-2018 Workshop Manual + Owner’s Manual. Climate Control System - Climate Control System – General Information section that shows the location of the Air Distribution door actuator and the removal/replacement procedure....
Chosen Solution So I had it working and plugged in a cheap karaoke machine to it and pop something there is smoke coming out shut it off and now it won’t stay on may you turn on it just shuts right off any help would be great. Hi @timwash1979 , Here’s the service manual that may help.
Chosen Solution So a while back I noticed my MagSafe plug would spark when being connected or disconnected from the MacBook. Sometimes the spark would immediately switch the MacBook off and I’d sometimes lose what I was working on but most of the time it was just a worrisome spark. I cleaned up the connectors but it had no effect on the sparks or immediate shut downs. I went through forums and deduced that it was probably the MagSafe board acting up....
Chosen Solution I got my iphone on Christmas of 2021 and it was running well until I needed to update it, the phone would act like it’s about to update until it got to the end of the update. But right before it finished it would say “not connected to network”, and I tried it again, and again, and again and it said the same thing every time. Then I tried to update it using itunes, and it kept saying the same thing....
Chosen Solution Hello. My phone is dead and I was told by Samsung that I need a new motherboard. I’d like to do the replacement myself. I found the replacement online but here is my question: My phone memory is 128gb. Can I get the 512gb motherboard for my phone? I mean is there another component in the phone that could be potentially incompatible with the board with higher memory capacity?...
Chosen Solution After disassembling my PS5 I put everything back together. When I plug it back in and open up a game the fan starts going insanely fast and it says the PS5 is overheating and then shuts off; the PS5 isn’t hot either. What could be causing this There are 3 temp sensors on the motherboard, and another on the APU. Sounds like something happened to one or more of these....
Chosen Solution I plug it in but it wont charge before it ran out of battery it said when plugged in, plugged in,not charging Hi @mosedc , If the charging port (micro USB) was the problem, as it is mounted on the systemboard, you would have to remove the systemboard from the tablet to gain access to the connector so that it either can be replaced if it is faulty (have you visually inspected it with a strong light and magnifying glass to ensure that all the pins (5) are there and that they are all straight and parallel with each other?...
Chosen Solution My 2003 Nissan Altima is making a grinding sound on sharp right hand curves only? What is wrong with it ? @cloudysbrat attached is a symptoms chart for your vehicle and here is an excerpt from the manual about how to remove those driveshafts. If you are up for it, you can check and/or replace the CV joint. Altima-driveshaft.pdf
Chosen Solution I have 49UJ651v LG TV. the dark side was the half down of the screen if I keep the TV On for around 5 minutes the light comes back it’s not too dark but it’s darker than the upper half but sometimes the upper half goes dark and the down half is normal. My solution was just to wait around 5 minutes then it’s all normal again. This kept happening for 1 year until now the screen is all dark not too bad but it’s darker than normal....
Chosen Solution I recently replaced my iPhone 6s Plus screen and digitizer. i did everything right and my screen works perfectly fine. there’s a huge problem though, when i put my screen on all the way (like, to seal it shut) it turns black and unresponsive. i know my phone is still on and working. it vibrates when i call it or plug it in etc.. i don’t know what to do!...
Chosen Solution Upon powering on the tablet it will not respond when I tap anywhere on the screen and is unresponsive to any user interface applied to the tablet’s touch screen. try re-seating the digitizer cable
Chosen Solution After some time I use my computer then I get this message: powershell stopped working. I don’t close it because I don’t want to find out what happens. I also removed all the viruses in my computer You can shut your laptop and restart it. Power Shell is similar to the command prompt but more capable. If you continue to get the message that Power Shell is not working then you can open a command prompt (with admin) and type the following SFC /scannow, this will check and repair system files....
Chosen Solution I dont remember doing anything to my iphone to cause the backlight to go out. I havent got it wet, or dropped it. I have and iPhone 3gs 16 GB white case. i was playing a game on it, in my house, and then 5 minutes later, i went to check my email, and the backlight didnt work. I can still see the screen if i shine a light across it....
