Chosen Solution My Xbox doesn’t turn on (Original Xbox) and I suspect it needs a new power supply board. If I repair it, will the data from the hard drive still be intact? Thanks! Silvercube, yes it will be.
Chosen Solution Acquired a 13” MacBook Air (Early 2015) A1466 EMC 2925 that had suspected water damage. Opened it up, cleaned the board, however didn’t see any real signs of liquid, no corrosion, etc. No response at all when power button is pushed. Using 45w MagSafe 2 Power Adapter (A1436). When plugged in, light is green for 2.5 seconds then changes to orange. Green light when fully charged. SSD definitely feels warm to the touch and I think I feel some slight warmth to the battery when plugged in....
Chosen Solution I have an iPhone 6s plus that wont charge past 85% no matter what i do. The story is this was a perfectly good working phone and i removed the battery to test it out another 6s plus that was having a bigger issue. when i put this back together I soon noticed it would not charge past 85% List of stuff I’ve tried. 3x different iPhone 6s plus battery’s Different charging ports Different cables and chargers resets looking at battery connector under microscope, (looks perfect to me) When i put an already 100% charged battery in it says 100% and seems normal at first yet after just a little use it drops to 85% and wont charge past....
Chosen Solution Hi All, My iPod classic has recently developed several issues. The iPod will sometimes hang when booting and stick on the Apple logo screen / main menu. Assuming the iPod boots successfully it will function fine until cover flow is used to select a song. In most cases the song will play successfully until menu is pressed to get back into the list of songs. When you do this the current song will just stop and a static clicking sound is all that can be heard even when the iPod is put to sleep....
Chosen Solution My sony dsc hx30v is vibrating intermittently. But everything is working fine. I am just bothered with the vibrations. Help Not sure if yours is the same problem as mine. I believe my own is connected to the image stabilization capacity of the unit. How mine manifests is by the image in the viewfinder often switching it’s own view of the subject in a quick up an down motion combined with an annoying clicking sound....
Chosen Solution Hello, I have a TOSHIBA led 46sl417u bought three years ago. Recently it started to black out, where the image dissapears and the sounds continues. Tried to turn off and on, and even unplug. But nothing fix it. Any ideas on how to solve it? Thanks hi after reading about this problem i thought i may help. hopefully you have not scrapped the television. A tv with these symtoms, i would begin by replacing the av board ie the audio video board....
Chosen Solution I have an LG 17 and the rubber feet are held onto the case with some kind of sticky substance that never dries out. A couple of the feet have “lost” that sticky substance. Have looked around locally, but nothing comparable to be found. Anybody know where I can get some of this goo? TIA! Hi I’m not sure about the exact substance but I have a good alternative!...
Chosen Solution i have an iphone 6 and the screen is messed up, it is cracked and the pixels are turning weird colors, it is extremely hard to use. in the mean time i would like to switch my sim card to a different phone so i do not have to pay for new service or to buy a new phone, the issue is that i have verizon so my phone is cmda meaning that i cannot simply switch the sim to any phone, i do not have applecare but i am due for a free upgrade in mid octoper....
Chosen Solution literally the first step is to remove the t2 screws and that bit is not included in the kit to fix the phone. fml. I had this problem then later discovered the Torx T2 was taped inside the box with the replacement battery.
Chosen Solution I have a Vizio E55-E2. The screen will go off but the sound is still on. I can get the screen to come back on by holding down the mute button for 3-5 seconds and then pressing the menu button. The screen will come back on for minutes/hours and then eventually it will go off again. It is not a consistent amount of time. I opened the back of the TV to look at the boards and the pictures of each board are provided....
Chosen Solution My Iphone 6s has suddenly stopped working for no real reason. I just could not turn it on one day (It´s charged and I have tried hard resetting it). I haven´t dropped it or anything like that and there is nothing wrong with it´s exterior except for one of the two little screws on the bottom has disappeared. I would really like to know what´s wrong whit it or what might have happened....
Chosen Solution this psp is can not use the x button ,so i open this but i can not see any problem so can someone tell me how can i fix my psp pls Hi There! Are the rubbers fine? Is the button fine? Did you cleaned the right side input foil? If you can answer all the questions with “yes”, you should replace the right side input foil/flex cable.
Chosen Solution Hi Tech Gurus I admit that I broke home button cable while I was removing it, but I replaced it with another original apple home button before install screen even. But still I got the msg NO TOUCH ID. any idea how to bring my home button back to live again?. You cannot replace the home button with another original one. You will need to purchase a Universal home button....
Chosen Solution I picked up the laptop, but due to recently having grown my hair, it was wet and a small amount of water entered the left side, when open in front of you for typing. The screen flickered so i closed the lap top and left it to dry overnight. The next day the computer worked fine, but now the fan makes a loud noise, and it seems a bit slow....
Chosen Solution I have a macbook air that I’m currently trying to fix that has an issue with the trackpad and the keyboard, where randomly the trackpad will only do right clicks and the keyboard will act like it’s completely out of wack. By “out of wack” I mean that buttons seem to be doing other buttons, pressing letters when trying to type in text fields will make the f*ck off noise (for lack of a better term) and keys like H will backspace, and the enter key will start putting letters....
Chosen Solution Even on a hardwood floor my vacuum is really hard to push. Because your vacuum is not able to be pushed, the brush roll and belt need to be evaluated. For this, first remove the brush roll and ensure it is intact and not attached to the main vacuum with fibers. Next examine the belt for tears and jams.
Chosen Solution I replaced the battery with one I bought from ifixit and its overheating and it is not working properly does the battery need to break in? What is happening? possible the battery has a defect. try a new battery and see if that corrects it. The battery does not overheat, it’s your logic board. Maybe you damaged the logic board when replacing the battery.
Chosen Solution My grandmother removed the battery pack from the Dremel and is having trouble reattaching it. The battery pack fits only one way, so you have to align the battery pack in the proper direction of the Dremel’s housing to attach it.
Chosen Solution I am trying to record a video, but there is no audio during playback. How can I resolve this issue? There are many reasons that could cause audio to not be recorded when making a video. One of the easiest solutions is to make sure your fingers are not blocking the microphones which are located underneath the camera lens. You also have the option to plug in an external microphone if sound is still not being recorded....
Chosen Solution I’ve tried to replace my old hard drive of in my MacBook Pro Computer (mid 2010) with a Samsung 850 EVO 500 GB SSD. I’ve been following all the instructions given, but when I have finished and tried to install the system from a pendrive (Mac OS High Sierra) onto the new drive, and gone to the Disk Utilities for formatting the new SSD disk, NO INTERNAL DISK appears, the new (and only) internal disk is not recognize by the computer....
