Posts

Chosen Solution I was watching Netflix and the TV just stopped where it was and froze I tried to unplug the cable and unplug the television nothing happened the power is still going to the television even though I am manually trying to turn it off from the television set and the remote it just won’t turn off it’s frozen what do I do If you unplugged the television from the wall and it kept running, you really do have problems!...

Chosen Solution The motor on my Karcher pressure washer has stopped running smoothly. It occasionally stops altogether as if overheating but does not appear hot. During operation it is constantly surging in power and then slacking off. Sorry for the un-technical description. Is the water supply sufficient. Check that any filter is clear. We used to suffer from low mains pressure and the Karcher would stop as it allowed enough water to get to it’s innards....

Chosen Solution My toilet seems to be leaking leaking and is soaking the carpet in my apartments bathroom (carpet in the bathroom is foolish but so is my land lord) It is not overflowing and I dont see any leakage at all. It seems that the water is flowing from under the toilet what could possibly be a good fix for my lovely throne. Michael Nicholas, I would lift the commode and replace the wax ring....

Chosen Solution Hello, I have a M17X laptop from late 2013. My display is flickering when moved in different orientations. Initially i thought it was a screen issue so i disconnected the power and display connection to the screen. After cleaning and reseating the issue still occurred. Could it be a loose or defective cable in the screen or could it be a issue with the video card? Yes . you are correct, fault con be coming from Video card, LCD cable and LCD as well Trace it, Check the graphic configuration set it to default level and see whats going on if same fault observed, Connect you M17X to external Display and check any sign of flickering if yes - fault coming from your Graphic chip if no - you can determined LCD or Display cable make the trouble and both of coming together and you can the Display with cable

Chosen Solution I tried to upgrade my ram from 1 to 2gb i inserted a 1gb ram computer would not boot up works fine with 1gb what can i do to solve this Hi, Both of your SODIMM RAM modules should be the same type and speed i.e. IGb - SODIMM Pc2-4200 ddr2 (ddr2 533 MHz). Do both 1Gb modules work when installed alone? If not one might be faulty. Do both 1Gb modules work when installed alone in either memory slot?...

Chosen Solution I was just using this normally, it suddenly turned off and won’t turn on, I watched a few tutorials on how to fix this and a bit later i tried SMC Reset. It didn’t fix it but I found out that it works when plugged in. I looked at the battery icon and it said “Battery is not charging Power Source: Power Adapter” (When plugged in). Details I know: Mac can still read battery percentage Battery says it’s in good condition SMC Reset doesn’t work I haven’t spilled water on it (I saw an article like this but they spilled water, the difference is his MacBook charges the battery mine stays at exactly 41%) This has been dropped but it was working fine for about a week (This happened just today) That’s all the details I know that I think can help people understand the problem (and hopefully suggest a way to fix this) Thanks!...

Chosen Solution My microphone only works on calls when I’m on speaker and it only works on my camera, when I’m on snapchat and Instagram it makes a static noise, solutions to fix? No sound on phone calls on the 7 would point to the audio IC it is a signature fault with this model. If it also has any of the following symptoms it would confirm it. These are the symptoms of audio IC failure on the 7 series....

Chosen Solution After turning on my tablet, I noticed that only half the screen is responding to touch. I’ve tried restarting and doing a soft reset, but still only half the screen works. I’m not sure how to figure out why or how to fix it. If only part of the screen is working it might be a problem with the connections of the digitizer ribbon cables. To fix the problem make sure all the cables are correctly connected to the motherboard....

Chosen Solution My iPhone 4 isn’t turning on. What can I try to get it working again? First, try connecting the iPhone to a wall charger to see if it will turn on, which will begin to happen immediately. If that does not work, let it charge for 10-20 minutes and hopefully it will turn on. Second, try a Hard Reset by holding both the Power/Top button and Home Button for about 15 seconds until iPhone turns on....

Chosen Solution When I press the power button, the Roomba doesn’t move. The power button does not light up either. Help? Issues with the battery could cause the Roomba to not turn on. To discover what is wrong with the battery, check out this Troubleshooting Page. It could be that the battery is dead, or that a new battery altogether is needed.

Chosen Solution I keep pressing the buttons but the device won’t turn on. To turn on the device, you must pull the trigger. If a pull of the trigger doesn’t turn it on, you may need a new battery.

Chosen Solution I realize i will not be able to use the iPod without the battery, but will the hard drive (or flash drive in the nanos case, right?) still retain its memory while NOT plugged into a power source? Will it connect to the computer at all with out a battery? Yes, you can use it as a flash drive as the memory is a non-volatile NAND flash (basically means, when its off, it’ll still retain data) I had a 1st gen iPod shuffle with a dead battery, which I took out, and it still works as a flash drive!...

Chosen Solution Hello.. I recently attempted to replace the CPU and hard drive in my 27 inch late 2015 iMac (17,1). I replaced the cpu with a 6700k. I was careful not to touch the power supply coils. But regardless .. after reconnecting everything the power button does not turn on the computer. Of the 4 diagnostics LEDs , only the bottom led displays green when the power cord is connected to computer....

Chosen Solution Actual reason, Windows may select a new default printer–the one it automatically sends print jobs to. When i give command to print any dacument from HP DeskJet 2655 then printer select a deaufult printer and not take to print the dacument. i facing this problem so if anyone give me brief reason or help me to resolve this issue. @rshari123 make your HP DeskJet 2655 the default printer. You did not tell us which Windows version you use, so start with these instructions for Win10 from Micro$oft...

Chosen Solution was working fine but now when i conect cable to charge it shows empty battery and not charging you need to replace or clean the dock connector/USB cord. Many times a good clean of the pins the USB cord connects to will sort this problem out…lots of dirt from pockets etc end up blocking the pins so your USB cord can’t make contact. Take a look at the USB cord too if the port is clear, check their is no damage to the cord or pin, try another port, try wall charger....

Chosen Solution I have the same problem. The service center refuses free repair. Please tell us how you achieved free replacement of the display? https://www.youtube.com/watch?v=kuz4UCck… Денис - В отличие от проблем с кабелем подсветки, FlexGate - это одна из линий видеоданных. Проблема в том, что у Apple нет расширенной программы гарантии на этот дефект. Но! Допустим, у вас возникли и эта ошибка, и ошибка подсветки. Как вы думаете, вы могли бы поспорить, чтобы заменить дисплей, который фактически устранит обе проблемы?...

Chosen Solution Why am I not able to turn off my tablet? does your power button work? Update (06/20/2016) Hold down power button for at least 10 seconds..it should turn off to the charging screen! Ray

Chosen Solution My spacebar will occasionally not add a space in between words, and sometimes it adds two spaces between words. How can I fix this? Have you checked this: https://support.apple.com/keyboard-servi…

Chosen Solution Hi, I replaced the screen on my girlfriend’s iPhone 6, this is my first attempt ever repairing a phone, so it was pretty stressful. I completed it, mostly successfully. Everything works, except for the speaker phone. I called myself from that iPhone to test out all the mic’s, and when I enabled speaker phone, it gives back this really echoey feedback. What could I have done wrong inside the phone and how would I fix that?...

Chosen Solution speedometer does not work checked codes had p 0500 (vss bad ) replaced vss still not working (no codes ) replaced instrutment cluster .still not working .replaced engine computer .still not working . replaced connector to vss .still not working . any ideas ? Have you checked the output gear on the transaxle to see if the gear is damaged or broken. It sounds like it’s not spinning the sensor....