Posts

Chosen Solution Hello, Someone gives me this stereo system but when I boot it it stays blocked on “hello” ? I unmounted and it it is a little dusty, if I clean it, will it be enough ? Thank you in advance Update (10/18/2018) Please find a picture of the “problem” @grimmgromm ➜ “HELLO” is displayed briefly. The system will switch to the last selected source. So in this case it may be possible that it can not find what it is looking for....

Chosen Solution Paper was jammed and we cleared it out of all pieces and it still says jammed, really frustrated. What can we do?? Try to unplug it, leave it unplugged for like 5 minutes and then plug it back in. Sometimes it just needs a reset. If it doesn’t work, check to make sure paper still isnt jammed.

Chosen Solution Random shutdowns (grep I is “previous shutdown cause -128”) But NOT in safe mode! In safe mode, machine runs for days. did all resets, new user, new OS-X install. Disconnected: SSD, Trackpad, Uppercase, I/O board, Battery. Also tried measuring temperatures on CPUAlso tried SMCFanControl to keep machine cool, to no avail. HELP! And please dont tell me to go to the Apple genius bar, they just say new MLB but I refuse to accept that....

Chosen Solution I spilled juice on my laptop 3 weeks ago, I took it the day after to get fixed and after 3 weeks I got it back when I first started using it it was working fine then it started turning off every little bit, is this juts a process of recovering from the damage or is it forever damaged. amal elhajjami sounds to me like it never got fixed right....

Chosen Solution Hello, I have a Lenovo ThinkPad T420 that appears to glitch/short out and restarts while I’m using it. Is there a way to figure out what is causing this and how do I fix it? When it does this I get a snowy screen for about 1.5 - 2 seconds then it restarts itself. It doesn’t do it on any specific app or window or screen nor does it do it at the same time every time, it’s random....

Chosen Solution not able to select any thing Is the glass cracked? If it is that can sometimes stop the touch screen from working. Depending on if the digitizer layer got cracked. The digitizer is the touch screen layer (still transparent) that is fused under the glass together. It’s hard to notice but if the glass solely is just cracked and not the digitizer layer not being damaged the touch screen should still work....

Chosen Solution I recently purchased it around two weeks ago and I’ve noticed that whenever I watch videos/movies or use apps that involve using the camera, the back (mainly around the rear camera) gets so hot to the point where it has actually burnt me! I was thinking it might be a battery issue but the entire back doesn’t get hot, only the camera - the rest of the back is normal temperature, Anyone know of a solution to this?...

Chosen Solution No network why not receiving or showing network Probable causes: Disconnected or missing antenna cable from logic board to antenna board IMEI blocked / barred phone.

Chosen Solution I just replaced my iPad mini 4 battery, booted it up and the battery showed 1% which I thought was strange so I plugged it into it’s charger, it then immediately jumped to 100% with the charging logo. After a few minutes of it charging it rebooted itself and keeps doing so plugged in or not. Upon every reboot it shows 1% battery with occasionally “0% remaining” under the current time....

Chosen Solution My phone was dropped and the screen was cracked and black. I replaced the screen myself, but when I tried to power it up, it would not turn on. I tried the force restart, but to no avail. Here’s the wrench: when I plug in the phone, the phone will buzz as if being charged and still will not show anything on the display. Thank you so much for the help....

Chosen Solution Why has my Motorola g4 not upgraded to android 7.0 as it came out late 2016 It started rolling out slowly late December. Have you tried manually checking for an update? •From the home screen, tap the All Apps icon. •Scroll to and tap Settings. •Scroll to and tap System Update.

Chosen Solution I plug in revivers to a live outlet, but receiver is dead. Standby light is not on and power will not come on using power button or remote. Is power supply the problem? How hard is it to replace power supply? William Rolnick before thinking of replacing the power supply check the fuse. Check to see if you a. gt power to the fuse and b. have continuity on the fuse....

Chosen Solution Basically, I bought a second hand iPhone 6, and when i first got it i noticed a few letters on the keyboard would press themselves, this progessively got worse to the point where i couldn’t use the phone as it would just glitch out and have control of the screen. I ended up replacing the screen and yet it was the same when i powered the phone up. I decided to remove the lcd shield and turn the phone on with assistive touch and to my surprise the screen seemed to beworking fine....

Chosen Solution My screen where the color black should be is red and fuzzy Matt Okuly you want to check all inputs i.e. HDMI, Cable, Component etc. and see if that makes a difference. Of course you also want to ensure that all of your setting are reset to normal. If all that checks out and your screen still shows the same then call up an on screen menu. See what that looks like....

Chosen Solution https://www.youtube.com/watch?v=zlUD997F… No damage on the fan. Computer seems to work fine. Uh, so apparently the fix was much simpler than opening it up and dealing with hardware. I just used a paperclip and pushed the little pinhole button underneath the laptop to reset the battery, then plugged it into the charger. It started up with no issue, no more loud noise. @michael5029 there may not be any visible damage but if you look carefully at your fanblade you see that there is a variation in fan speed....

Chosen Solution After using my Ninja blender, the lid is always stuck. I always have to ask my Dad to remove it. Why is it getting stuck after I make my smoothies? If you use the dishwasher to wash your blender components, make sure to allow several hours for the all the water to dry, especially for the lid. If there is still excess water between the seal of the lid, it can create a tight suction and make taking off the lid difficult after blending....

Chosen Solution If I put my washer onto a cold/cold cycle, my clothes still come out hot. I even shut off the hot water inlet going into the unit to prevent this. Could this be a ATC problem? Sounds like you’re getting hot water from the cold water inlet. This could happen if the water hose connections have been reversed. Try running on a hot cycle, if I’m correct the water will be cold....

Chosen Solution Hello guys I bought a iphone 6s 64gb space Grey. It is sprint locked and when I entre my imei or serial no in any online iphone checking device it shows up as an iphone 6s but in an rose gold colour. Secondly my home button black and home buttons can only be changed by apple or they loose there fingerprint sensor but mine is working but it should be in white colour....

Chosen Solution Trackpad is heating abnormally and its not working only after login. Some component has likely gone bad on trackpad, if there’s unusual overheating something is shorted for sure. Keyboard connector goes to trackpad, thus is normal that doesn’t work either. Try replacing the trackpad and maybe since you’re at it already replace the connecting cable too to be on the safe side.

Chosen Solution I turn on the heater on my Amana heater and a/c unit and only blows cold air, it seen to be working good but does not heat jose lopez, it appear that your unit actually has a self diagnostics mode. Try this from the manual “DIGITAL BOARD DIAGNOSTICS If a failure is detected on the digital board, there will be a green light constantly lit up. This light is located under the OFF touch pad button....