Posts

Chosen Solution I recently purchased Spyro Trilogy for PC. 30 to 40 minutes into gameplay, my computer restarts. No blue screen, no indication. Temps on CPU + GPU are within normal range. Thermal paste has been changed too. There is no visible sign of damage on the motherboard, or burning odour. Fans operating normally too. Harddrive has been scanned for bad sectors, but it is completely fine. **Another thing that happened is, after the comp restarted, I went back into Spyro, and another reset occurred, but this time, the computer fell into a bootloop....

Chosen Solution Lately, my mac book’s fan is spinning a lot faster even though there are no heavy processes running on the background. And when I open FaceTime, I get a message saying that ‘Video will resume when Mac cools down’. I tried resetting the SMC and PRAM, didn’t help. The Mac is not hot at all. The temperature in my area is 22 degree C. OK at this point we know the issue is not a thermal one but either a voltage issue or a bad fan....

Chosen Solution The secren not working and when i chargit there is a charging voice soo i think the secren have a problem Do you mean that nothing is displaying on the screen or that it is not responding to Touch commands? NO DISPLAY - Depending on the history of the device (drops, water, repairs), you may have either physically damaged the LCD or the backlight driver circuit may be blown....

Chosen Solution I got my phone fix by a professional(works at apple) and after I got it back New screen an everything it seemed fine. After a couple hours with it, i would be scrolling down an it will mess up it start scrolling up as I’m going down or even zoom in and out. Like it loses calibration. I ask the guy that replaced it but he won’t look at it unless I pay him....

Chosen Solution My Ryobi sander started making a strange noise and is not sanding proper. I made sure there were no loose screws, cleaned it and then let it sit for a few hours to cool down as I had been sanding on and off for several hours. Unfortunately none of these seemed to help. What could be causing this and is it fixable ? Possibly a bearing going, either to or bottom....

Chosen Solution I dropped my S3 in the toilet. I tried the rice trick; it did not work. I took it apart and tried to clean out any water corrosion. After i did that, it worked… but there was a slight purple screen discoloration. I sent it into Samsung and they ruled that it was beyond repair because of a pad that had lifted on the IF connector. When they sent it back, the screen no longer worked....

Chosen Solution everytime I put it on the charger Apple logo appears then goes blank after 3 seconds then shows the red bars that indicates the phone is dead even after a whole nights charge You could have a dead battery. However, it is better before assuming anything to tell us the history of this phone: You had it new or used? Are you using fake or original charger and cable?...

Chosen Solution After replacing the power button and back glass, my iPhone touch screen seems to responding erratically and unpredictably. Okay this could be down to a few things, connection issues or the flex could be damaged. First please try a hard reset by holding down the power and home button at the same time until the screen goes black and the apple logo appears, then let go. if the issue is still present please do the following....

Chosen Solution I have an iPhone 6 Plus that has recently been giving me some problems. I listen to music a lot and lately my earpods have a hard time going into the phone socket and coming out. I actually have to pull and push really hard to get them to fit in and come out. Any ideas what could be going on and how I might fix this? Thanks!...

Chosen Solution My new usb superdrive will not work with my macbook pro. Will you help me, please. This drive will not work with Macs that shipped with an internal optical drive. But here’s the work around: http://www.hardturm.ch/luz/2011/10/how-t…

Chosen Solution My device is currently turned off, and no matter what I do it will not turn on. How can I fix this? Your battery might be damaged or dead. Try removing your battery and charging it. Make sure the battery is fully charged before re-inserting it into the camera. If you’re still having issues, you might need to replace your battery. Check out this troubleshooting guide for more information....

Chosen Solution Even after charging my device, when I press the power button, the GPS is not turning on. I have even tried replacing the battery, and it is still not turning on. There could be multiple reasons why your device is not turning on. Consider checking to see if your charger is working properly by testing it on a separate device. If it is not a defective charger, then there may be more serious issues such as a faulty motherboard or display screen....

Chosen Solution When I broke my iPhone 4 screen, I decided to go in and replace it myself. I got the glass on correctly and everything looks good, but now I can’t use my rear camera. Also, it won’t even give me the option to use the LED light (attached to the camera) as a flashlight. I’m not sure if I disconnected it from power somehow since the phone doesn’t seem to register the camera at all....

Chosen Solution i was playing a game after doing errands on my ipod touch 5 and I wanted to leave the app since I wanted to play another game and it was acting slow, so I used assistive touch to go back to the home screen, but it was still slow, so I clicked lock screen hoping it would take me back to the home screen, but nothing showed up! after clicking the home button which is not working and the power button for like hours, nothing came up I had all my photos, texting apps and games on it what do I do?...

Chosen Solution Hi, As the title says. Will the M550 run on an early 2009 model (5,2). I’ve read something about SATA (2 or 3) cables not supporting, or at least not the ones from the Optical Drive. And thats the point. I want to replace the Optical Drive with my SSD and run both with my HDD, if this is possible? So that’s my 2nd question, will the HDD and SDD both be able to run....

Chosen Solution Will a iPhone 5s battery work in a iPhone 5? You will not be able to use the other battery. Besides connectors being different, please look at these specs. iPhone 5 battery: 1440 mAh, 3.8V, 5.45 Watt Hours. iPhone 5s battery: 1558 mAh, 3.8V, 5.92 Watt Hours. I’ve attached the battery and guide to fix it. Good luck! iPhone 5 Battery How to replace your iPhone 5 battery

Chosen Solution I have a pioneer VSX530 and I turn it on and it light up then shuts off right away Jeff, According to some forums, etc. that I read possible causes are amp. shutting off, is over heating, speakers are the wrong impedance 4 Ohms instead of 8, too many speakers connected to a channel, damaged/pinched/frayed wire. Disconnect all speaker wires from the amplifier, see if it still shutting off....

Chosen Solution My Samsung Galaxy camera 2 won’t come on past the logo screen…. Ive charged & still won’t go past logo screen help! Hi, Try using Samsung Kies to see if there is an option to update or reload the firmware for your camera. Here is a link to the User Guide, scroll to p.49 regarding updating using Samsung Kies. http://downloadcenter.samsung.com/conten…

Chosen Solution Hello! I got this used because from family since it would not turn on. I ordered a replacement motherboard to get it back up and running. After putting everything back together for the first time, it turned on to the splash screen. For a few seconds it was loading then artifacts showed up on the entire screen. I understood probably that I hadn’t plugged in the screen properly into the motherboard....

Chosen Solution Not an answer but a similar problem. Our Zanussi ZDT 6252 DW has worked fine over the years, with the occasional need to to flush out the waste pump when it greased up. Recently however it has stopped draining completely. Just to confirm the waste pipe forms a high loop up to the counter-top before connecting to the U-bend. I disconnected the waste connection at the U-bend (guessing the pipe connection was blocked) and pulled the waste pipe from under the counter top to flush it through....