Posts

Chosen Solution My laptop is constantly disconnecting from the wifi. I mean like only a minute after reconnecting it to the wifi. I’ve determined that it isn’t the router, since all of my other devices don’t have a problem staying connected. Nevertheless, I have still tried restarting the router but it doesn’t work. I’ve also simply tried restarting the laptop, but that also didn’t work. My laptop is a Dell and has Windows 10, with a 64-bit operator....

Chosen Solution the current doesn’t enter the coil of my Honda accord 97 2.2 If theres power to the coil but nothing coming out its time for a new coil

Chosen Solution My laptop is situated on a flat surface, and there is nothing up against or blocking the air vent. But it is still giving off much more heat than it should. You may need to clean out your air vent. When dirt and other debris gets stuck in there it can cause the fan to work slowly and the laptop to overheat. For more information visit this troubleshooting page....

Chosen Solution I have 2 4GB RAM sticks, when I use the bottom slot only, it boots normally with both sticks (One at a time), but when I use the top slot none of them work, also when I insert both sticks gives me the 4-beep Memory error. Can someone help me out? I’m lost now. Edit: the Lap is an M14x R1, it was not listed on the devices dropdown....

Chosen Solution My GE Profile (Model TPG24PFCE BB) won’t stop running, which chews through the power. It is more than cold enough! How do I get it to start cycling on and off as it needs? Cause 1 Condenser Coils are Dirty The condenser coils are usually located under the refrigerator. They dissipate heat from the refrigerator as refrigerant passes through them. If debris accumulates on the coils, the refrigerator will have to work harder to remove the heat....

Chosen Solution my samsung galxay tab 3 has been working fine all day now all of a sudden its turned of but flashing (samsung galaxy tab 3) or if put on charge will just flash the empty battery symbol whats wrong? Have you tried taking the battery out.then put back in and put on charge for 1 hour. Don’t try to boot until it has a good charge. I think it’s a super flat battery…hence it can’t boot....

Chosen Solution Asus Transformer T300T There has been no damage to the tablet. It wasn’t dropped or hasn’t been wet, but the screen flickers, programs aren’t opening or loading correctly. The screen starts scrolling to other screens or the keyboard function opens and letter start typing. Besides being creepy, it’s 100% not functional. Hi, Have you tried resetting the device. There is a paperclip sized hole on the side, between the micro HDMI port and the micro SD Card slot....

Chosen Solution only a portion of the image appears when I take a picture Is the image messed up on the LCD screen or within the saved picture? If the LCD is only half viewable then the LCD display is damaged. If the saved image is cut off is it on the bottom half of the image the reflex mirror is not working correctly and will need repair.

Chosen Solution I started the replacement and used the suction cup to pry up the display after using the iopener. I began loosening the display and it didn’t look right. It looks like the screen shield did not come up with the screen. Is this accurate by the picture? How do I fix this without completely hosing everything? Might be a stupid question but did you remove the two bottom screws?...

Chosen Solution The rug cleaner roller will come on but will not stay on for more than 30 seconds. The roller is clean, the belt is fine. The switch seems to be working. What could my problem be? Hi P. Taylor! The first thing that I would think to check would be the motor and if that is actually powering the belt. The next thing I would check would be to see if the belt is tight enough to consistently activate the roller as it may look good, but could be stretched....

Chosen Solution I set the heat and normal wash. Push the start button. After about 3 seconds the start button starts flashing “resume”. I push it again and still nothing. It keeps flashing “resume” but will not run. Possible Solutions Was the door opened or power interrupted during the cycle? The Start/Resume light flashing, (Select models), indicates the cycle or start-up was interrupted. This can happen if the door is opened during the cycle or power has been interrupted....

Chosen Solution when i turn my Acer Laptop model number pav70 on all it does is load and reload a blue screen it will not go to the home page or anything Tabetha, I am assuming you are talking about the windows home screen. Try to start your Windows computer into safe mode “To get into the Windows Vista and Windows 7 Safe Mode, as the computer is booting press and hold your “F8 Key” which should bring up the “Windows Advanced Options Menu” as shown below....

Chosen Solution I replaced the digitizer and blew the backlight fuse. I jumped it and the backlight works now, but I can’t get it to go past the white apple logo screen. I’ve tried reseating the connectors, holding the home/power buttons, but it just does the same thing. What are my next troubleshooting steps? How did you blow the backlight filter? Was it because you forgot to disconnect the battery prior to removing the LCD?...

Chosen Solution So I’ve had this problem which has happened with my last two rolls of film. And basically some photos aren’t developing. They don’t appear on the negatives, nothing. I really can’t understand why nor have I found the answers online. I didn’t know if it’s a problem with my camera (canon ae1 program) or how I’m loading the film, something else I could be doing. One roll of film only developed 12 of the 36 and the othe roll I think developed 24....

Chosen Solution Camera will not turn on, red light blinks 3-4 times after switch to on position but no sound , no vibration, no light , evf dont work. After replacing motherboard , does software recalibration is require? My camera doesn’t turn on Make sure the battery you are using is charged; attempt to recharge the battery if necessary. … Make sure the battery is properly inserted in the camera. Attempt to turn on the camera....

Chosen Solution Hi all, my Sony kd-43x8309c won’t turn on. There is no standby light. I’ve performed a hard reset with power and volume down buttons. I’ve replaced the fuse and even the power board, but nothing. I am sure all voltages on the board are fine - could this now mean a main board issue? Josh Bowater not really. If you have no power light on it should be the pwoer board....

Chosen Solution Yesterday I was playing a game on my ipad and all of a sudden the screen dimmed untill it was all black. I tried everything and it wouldnt turn on. This morning I tried again to see if it works and it turned on with a white and grey dead battery screen Please let me know what is wrong with it and if theres anything I could do...

Chosen Solution hello, i have an iphone 6s that keeps rebooting but instead of what others have…my screen has a huge no signal type screen that flickers. I will attach a pic to get a better understanding. From trying to reboot, i get an error code 4013. I read that it could be a proximity or front camera faulty cable so i tried to disconnect it but it would still give me the error....

Chosen Solution Myh 92 Jetta 5 speed manual wont shift into 2nd or 4th gear. If rev’d up, will go into 3rd and up to 5th. What could this problem be? catherine.a.elliott73 , There is a possibility that the shift linkage bushings or cable brackets are bad/loose or it could be a more serious transmission internal issue like worn/bad syncro’s/gears/bearings, damaged/bent shift fork,etc.. Have a good local transmission shop have a look, diagnose and estimate repair....

Chosen Solution I’ve had my laptop for a little over a year now. Haven’t really had any issues until the last couple of months. I was traveling with my laptop and once I came back home, it refused to switch on. I left it alone for 2 days, and it started working again miraculously. The same thing happened yesterday. I had left my otherwise normal functioning laptop at home, and came back to a dead laptop that wouldn’t start....