Chosen Solution I have been using my JBL for about a year now, and the sound quality seems worse than usual. Is there a way for me to fix it? The problem with the JBL at this point could be due to multiple reasons but most commonly, the decline in quality is caused by either overuse or playing music at too high of a volume. The only way to fix that is to replace the speaker completely....
Chosen Solution why is my jeep dying after i drive it for a few minutes and I let it sit for 15 to 20 minutes and it starts again The relay for the pump may be heating up, and shutting off, It’s the cheapest part so I would go after it first and then the fuel pump.. I would also see if you can get it to an Auto Zone and get a free computer read out....
Chosen Solution Hey , why is my laptop makes noise , everytime when I start using it walidchaki6, The noise you hear could be dirty or faulty fans. Check the link below to see how to disassemble and clean fans. If cleaning does not get rid of noise and it is the fan, replace it. Clean the whole board, vent ports, fans, etc. blowing them out with a can of compressed air while apart....
Chosen Solution There are fresh batteries in my remote, the speaker is turned on, but when I push the buttons on the remote nothing happens. There might be something wrong with the remote, check out the troubleshooting page for more info.
Chosen Solution The display is working, however the the touch screen is not responding. Hi, As the phone has recently been released, (within the last 12 months), I suggest that you check the warranty period of your phone and if still valid, consult the warranty statement contained in the User Guide supplied with the phone. It should detail what you have to do to make a claim for a warranty repair or replacement....
Chosen Solution i had change iPhone 6 Lightning Connector and Headphone and my iPhone becoming Lightning very slow and charging Elapses very Fast and i Feels heat from the back side Thanks for all try to help me i just find answer for my problem it was from lightning cable i have change it with original one and it working very good Seems like there is a short on the board some were....
Chosen Solution It turns on but it just shows like the A/V cord is not plugged in. But when I unplug the A/V cord while it’s still on the power starts flashing red. What do I need to do? Try using a HDMI cable. Does this still not work, if it does it might be your A/V cable or port.
Chosen Solution My mouse was previously working, but no longer seems to be turned on. Neither the LED on top of the mouse, nor the optical sensor are lit up. I’ve tried using the on/off switch to restart the mouse several times, but it does not light up. Hi @ Vicente Morales, According to the User guide for your mouse, the LED light is a power On/battery level indicator. This appears to be its’ only function....
Chosen Solution I have an Powermac G5 with the single core. I have installed the antennae to the back of the machine and I have put the airport extreme card in. It will not recognize the airport card in the apple software(My powermac G5 runs OS X Panther. The PowerMac and iMac G5 are two different types of machines. Please go here and see if it is the first link or one from the second link....
Chosen Solution Sometimes we can use the wii for hours, but it will randomly shut itself off and the power light is red. You can turn it back on and use it again, but then shuts itself off again randomly. This does sound like somethings overheating and a good cleaning with canned air wouldn’t hurt. Also try this: unplug the power cord from both the wall AND the Wii, then unplug everything else attached to the Wii....
Chosen Solution I’ve tried hard resetting and it didn’t do anything. The phone will only charge turned off. My computer doesn’t recognize the phone. When i turn it on the apple logo appears then the screen flashes black for a second then the logo re-appears. I tried resetting all settings under general using the passcode i use to unlock the phone and it locked me out. Cleaned charging port thoroughly....
Chosen Solution One day just doesn’t turn on no activity at all no HDD light, Power light or Battery light. Hi, Try a power refresh and check if this resolves the problem. Remove the charger (if connected) and the battery from the laptop. (Here’s a link to the ifixit Dell Inspiron 1564 Battery Replacement guide) Press and hold the Power button for 30 seconds to drain any residual power from the laptop, then release the button....
Chosen Solution I have a phone for repair it came in as no image problem with no backlight. After checking the phone, a capacitor for the backlight, C3903, was missing. Instead of replacing it, I bridged it together which was wrong choice because it burned the backlight filter FL3901 off the trace. So after replacing the capacitor C3903 I made a jumper and connected it to C3725, enabling the backlight to turn on....
Chosen Solution Hi, I´m recently bought a 2tb Xbox One S and it´s fan sound like something is hitting the blades. Any guess about how to fix it? Hi Yan, It´s really simple to change the bearing, you can remove the fan without have to remove the heatsink. The fan is almost the same, but it dont fit well, because the height of the one s. I suggest you change the fan to a custom one, like corsair or another pc fan, it´s really simple, look for guides in Youtube, i got better results changing the fan instead of the bearings....
Chosen Solution Hi I got Sony kdl-46w905a and it won’t turn on and no red blinking code and all I hear when I plug it in is a clicking noise and a pause for a second then another clicking noise as if the power supply has a relay and is relay is turning off the power supply bcuz of a problem, bcuz of this I have no way to check voltages anywhere as there’s no standby light but I think I get a white light for a second then goes off, I’ve checked for bad capacitors or shorted mosfets but haven’t found a problem, and I was thinking if there’s a way To bypass the protection so it stays on so I can check voltages ?...
Chosen Solution EDIT: I already tried the factory reset holding the volume up and connect button. It doesn’t fix the issue. Okay, so! I’m quarantined just like the rest of the world so at least it’s not THAT bad. JBL flip 4 worked without a single issue for over a year, and I even got it second hand. Now, I was listening to some music cleaning my kitchen, and my stupid self lifts the mini oven the speaker was sitting on, and it drops on the hard floor from around 150cm height....
Chosen Solution What is really strange is Ia m getting faint / soft phone call audio, but when I test the Voice Memo, the audio is loud and working 100%. I then recorded both the front and back videos. The videos record, but with no audio at all. Any one got any ideas on what this could be? If i’m not mistaken the back camera uses the microphone from the power flex cable for sound and the front camera uses the front camera flex microphone for it’s audio intake....
Chosen Solution I’ve recently tried to charge my old iPhone 4 to look at old pictures. It gets stuck on the apple logo for hours and won’t move past this. How do I get past this or is it completely bricked? Does the iphone stay on when the phone isn’t plug into charger? Otherwise the battery is faulty.
Chosen Solution Hello everyone, my iMac started beeping 2 days ago and I was reading that could be RAM problem but absolutely everything works fine! I am using a lot of memory for my Photoshop work and there is no problem with it. What could this be..? Please help, this sound makes me crazyyyy! Thank you Hey there, It sounds like the beeping is occurring due to an issue with the RAM....
Chosen Solution The S/n under 10,000 is no longer supported can you guys work on these? Hi Chad, I had at least couple of these with 1 (that is ONE) faulty capacitor in power supply that manufacturer solution was not to repair but to supply whole board. If your PCR machine doesn’t power on or shuts off occasionally, could be that capacitor C19 100uF has to be replaced. Hopefully you can find someone to do that for you....
