Chosen Solution So, I basically pressed the software update on my phone from Samsung, my phone is sprint by the way and I pressed install now, so it restarted I guess, but now it just stays on this screen I tried all methods and none work. The screen just says the serial number, information about the phone, Samsung Galaxy S8 and android. It does go to Download mode and Upload mode, but nothing else is working....
Chosen Solution About a month ago i dropped my phone and completely shattered the top left corner of the screen, branching out into more cracks. Since i’ve dropped it, over time, tiny pieces of the glass screen have been falling out and has now left about a one inch gap of the left corner of my phone, without the glass screen. A portion of the top left of the screen that you actually touch and use to operate the phone was also left exposed....
Chosen Solution Why is my washer not spinning & draining The common issue to these two issues is: The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not drain. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it....
Chosen Solution I set the time daily on my tab. 4 10.1 and it will be wrong by 2 or 3 mins. the next day. Go to settings, then to date & time under system, and select automatic date & time and automatic time zone. This should fix your problem. I hope this helps. Amazing, but the simple apn update fixed it for me. Go settings ,turn off auto matic time zone, options available time zone , and click, select country , India’s any famous city came like Kolkata, delhi select Kolkata or other , click , and success...
Chosen Solution it hassnt even been three days and my iphone is already giving me problems again,i replaced my screen and battery in the same day,2 hours after replacing my screen it stopped sensing my touch,it turned on and everything perfectly fine,i just couldnt use it,later on my charger stopped working and my iphone went completely dead.at the beginning when i pressed the power button the “need to be charged icon” would pop up and when it was put on the charger,it would to but now its not working at all,nothing is showing,i just have a black screen...
Chosen Solution When I connect the camera to my computer via USB cable, the computer does not detect the camera, why? The camera drivers is probably not installed on your computers. So you will have to more then likely download the software to your computer that is meant for your camera. That camera driver really isn’t the issue.Your computer, by default, tells itself to turn off power to usb ports to conserve power....
Chosen Solution My laptop starts and I can hear it running but my screen stays black. This is probably a symptom of a broken screen, it may also be due to a loose connection or issues with your motherboard. Refer our troubleshooting guide for more help on this issue. Asus X200MA Troubleshooting Also, check the battery, it may not be charged. You might just need to plug it in! Check RAM
Chosen Solution See image content: Since you said the Wifi and Bluetooth are not working that threw a red flag, Indicating that there is a issue with the Antennas, If it was just a “No Signal” message I would advise you to check the SIM card in the device to make sure it is inserted properly without damage, But that doesn’t seem to be the case and the problem most likely is with the Circuitry of the phone....
Chosen Solution One month ago, I got my iPhone 8 wifi disabled, and cannot be enabled.. so i went to a workshop, they fix it by changing the wifi IC… then after two weeks it get disabled again so i returned, and they fix it by software (i think it is on computer). Today the same is happen, and they reenable it by software. they politely refused to tell me how they did it....
Chosen Solution Hello, As many other people experienced, the display hinges of my 7559 became loose. The threads where you screw in the display broke off on the left side. As a consequence, whenever I closed/opened my screen, the hinge moved as a whole and lifted the top part of the case up. I fixed this by buying a new bottom base and migrating the laptop to it. At the same time as the hinge started to malfunctioning, my WiFi signal all of a sudden dropped to 1 bar, even though I’m sitting right next to the router....
Chosen Solution Hi, I’m moving to Europe and I was wondering if my fairly new TV set would work there (https://www.samsung.com/us/televisions-h...). Technical specs says it’s 110-120v & 50/60 hz so I’m guessing it would not work? If it does would it need a voltage transformer? Thanks Hi sffixers If you are moving to europe which is using 230V, There are several options. The safest is to use a step down transformer, from 230V to 110VIf you are comfortable to open up the tv, check on the power board (Take note on the model no too), some will have a detailed information on it, hopefully can support universal, e....
Chosen Solution This morning, I turned on my laptop and entered my password to sign in to Windows 10. Everything was normal as usual. In the noon, I put the laptop to sleep and then I left. After an hour, I resumed it, but Windows 10 said my password is incorrect. I checked my password several times and I’m quite certain it is correct, but the Windows 10 keeps saying the password is incorrect....
Chosen Solution Hi, I’m installing a transparent back plate to my Note8. There’s a plastic black thing lightly glued onto the top of the battery, it’s kinda scratched up so I want to put a sticker on top of it to make it look nice before I install it. Any cool suggestions on what I could put behind there, if not a sticker? Would a sticker even work? I fear that the heat will make it come off with time....
Chosen Solution Every once in awhile I have no sound when I turn my tv on. It will come back on it’s own eventually. Is there something I can do to bring it back or just have to wait? I’ve tried turning it off and on repeatedly but that doesn’t seem to work. kathiemacdonnell always make sure that this is really caused by your TV. It can be caused by your cable top box, sat receiver etc....
Chosen Solution Ok. I have a 5hp Briggs & Stratton on my MTD rototiller. I’ve changed the carb gasket, see picture. I’ve cleaned out the passages. I’ve used sea foam in the fuel, it’s got fairly new gas. I cleaned and checked the gap in the spark plug and it’s good. I can still see through the air filter. But I can start it and it’ll run for a few minutes then die....
Chosen Solution Un65mu6500 stopped working after loud pop. Can it be fixed? @koreyws It all depends what has popped but most likely that answer is yes, it can be repair. I suspect that this originated somewhere on the power supply. Possibly a capacitor but I have seen the rectifier failing as well. Pull the power plug on your TV and remove the back cover. Without touching anything (yet) visually inspect the boards for anything that looks odd (burned, charred or missing components) then take a couple of really good pictures of the boards and the damaged components (if wound) and post those with your QUESTION....
Chosen Solution After I was done using my HP Compaq 6910p yesterday I decided to hibernate it, now I’m trying to on it but its not booting. please what’s going on? Flea power is the common cause to this prooblem, basically what happens is when residual power that remains after the computer is switched off interferes with the system preventing with the boot process. What you do Turn remove the batterydisconnect adapterPress and hold the power button for 30 secondsConnect the power adapter without the battery Your computer should turn on now If it doesn’t this http://accatech....
Chosen Solution The picture stays on the screen and the cursor disappears. Hi Larry, Do you mean Mouse or Touch Pad? If a mouse just unplug and plug back in again. This should reload the driver. If the TouchPad then uninstall the driver, run something like Ccleaner to clear away any corrupt settings. Reboot and re-install the driver.
Chosen Solution My jvc smart TV is only showing smart loading and after a while it will trip off and comes up again continuelly. How do I fix it Most probably the firmware is corrupted, try googling your model and see if there is a recovery firmware. normally it would be copied to a usb thumb drive and there are instructions from jvc on how to initiate a firmware recovery. you can check with jvc too for more information
Chosen Solution It is only shutting off while I’m watching a movie on it,and playing games etc. Hi, Does it behave normally if you watch videos or play games with the charger connected and powered on? If so, turn off the tablet and leave the charger connected and ON to fully charge the battery. Once the battery is fully charged, disconnect the charger, turn on your tablet and then try playing games (or watching videos) and see how it behaves....
