Posts

Chosen Solution When I press in the keys, the device does not respond. Make sure the device is powered on. Make sure nothing is obstructing the connection point between the keyboard and tablet. Press different keys. Perhaps, not all the keys work. To find out how to replace keys check out the troubleshooting guide here. There’s also an on/off switch near the lower right side that can easily be pressed and cause the keyboard not to operate until it is powered back on again....

Chosen Solution my laptop display is split and nothing is changing , it use to start well but after sometime the display split but now it remain split always even after powering it off the whole night. can it be my video card has a problem? hi it’s the graphic chipset man. disassemble your computer then heat the graphic chipset for about 2mn then let it cool down 1 hour. then assemble evrything and power on....

Chosen Solution I shattered my iPhone 4 screen and I disassembled and reassembled it myself. I fixed my screen but the phone will not turn on. However, it keeps making this weird beeping noise when I put it on the charger. What does that mean? I would’ve took it to a professional but they tried charging me $150 just to get a new screen. Check your work very carefully. Make sure the LCD Display Flex cable is perfectly pressed down to the logic board connector....

Chosen Solution I would like to use my 1/4” bits and up to 8mm sockets with my ifixit driver. I can’t find an adapter anywhere. The issue is torque! Using a small diameter handle (4mm bit) won’t offer enough purchase to torque the fastener either off or on. It sounds like you need a different kit like: Manta Driver Kit - 112 Bit Driver Kit so you get the proper handle....

Chosen Solution For some weird reason, my 7537 came with 6GB of RAM. Do you think I can upgrade it to 8GBx2 = 16GBs of rum? Is there any DDR or BUS limitations? Also, mine came with a 500GB 5400RPM HDD. Do you think installing a 7200RPM will be a problem? What about hybrid SSHD? Will that be a problem? my cpu: http://s22.postimg.org/oehic7g9d/cpu.png my ram: http://s22.postimg.org/tomh3i0i9/ram.png I own a Core i7 version with 16GB RAM with a 1TB 5400rpm hybrid drive....

Chosen Solution Hey guys. I dropped my phone and screen was broken and battery’s film was broke off. I bought battery and screen and fixed it. when I opened the phone, the phone stuck at apple logo. It stucks about 5 minutes then it reboots by itself. I tried DFU mode and home button do not react. So, I cant restore it. How can I fix the problem? Regards… What happens if you try holding both the power and home button for 15 seconds during the apple logo boot loop?...

Chosen Solution I bought my Stealth from a local Pawn Shop before Christmas 2016, and it’s always worked great. I bought the 90 day warranty. The charger has always been a little loose when we’ve plugged it up to charge, but it’s still charged with no problems whatsoever. It’s been about 10 months now, and all of the sudden nearly a week ago I plugged in the charger, and it would not charge....

Chosen Solution Every time the I try to turn the printer on it won’t. Make sure the printer is plugged in if it still won’t turn on replace the ac adapter. This is definitely a power issue, I would say try replacing the power supply. Before doing that this video that I found could help you troubleshoot before you actually go that route.

Chosen Solution Top is now darker than bottom on both pieces of bread. Put in one piece of bread and set it to toast. Look into it on the empty side and see if you can discern if the bottom chills are turning red. If nit you may have a break in the heating wires. The problem will be trying to find a replacement part.

Chosen Solution I currently have a battery and a hard drive that came from my E6410 laptop. I was thinking about buying an E6400 but it doesn’t come with a battery or hard drive. Could I just put the E6410 battery and hard drive into the E6400 and be fine? Or do I have to buy a new hard drive and battery? Thanks! P.S: the battery is 11.1v and 90Wh (I have no idea what that means…lol)...

Chosen Solution Tv has red light, green light after pushing power button but doesn not turn on. That is usually an indicator of something not working right (obviously) This may help: https://www.sony.co.th/en/electronics/su…

Chosen Solution I have a Samsung tablet that doesn’t play on the tablet at the same time as bluetooth speaker. Any chance there is a fix for this? I have experienced this delay on JBL speakers. It is a bluetooth thing. If you try to play sound from the tablet to speaker when outside and there is no delay… then it could be signal issue in the room. I am watching YouTube from PC - USB Bluetooth dongle - JBL Clip 2....

Chosen Solution I have the Kenmore 90 Series Washer (11028922790). Washing , Rinising and draining working fine but the spin cycle does not spin. If I did a manually spin at spin cycle and then depress the timer and turn 360 degree to the same spin cycle and pullout knob (same time manually spin ) doing this few time. The spin cycle will start to spin back to spinning speed. Can you tell what’s the problem....

Chosen Solution I Reset My Phone And now Its stuk on Apple logo with 99% loading bar I cant enter recovery because my home button is broken Any help is appreciated This happen due to incomplete format process or jailbreak phones.The only solution is that put the home button from other phones and restore via iTunes.

Chosen Solution I’ve had this DSI for a number of years and for the last few my system clock hasn’t worked. I havn’t been playing it much so it hasn’t been an issue until now. Any time based events in games do not work, my time will not move allowing the days to change and day night cycles don’t happen, and when I open the alarm feature it doesn’t count down at all....

Chosen Solution I replaced a screen on a iphone XR but I moved the earpiece and sensor module over to the new screen and was very careful. The earpiece functions correctly any ideas what this could be? You could have a bad connection or you could have torn the cable. It’s easy to tear cable.

Chosen Solution I have replaced both the battery and the power board. The computer will turn on up to the login screen. The screen shows the battery is 100% charged and the charger light is green. It doesn’t appear that any of the keyboard keys are working. I have tried to reset the smc to no avail. Even the power button doesn’t want to do anything. I can “shut the computer down or restart it via the track pad” but there is no response from the keys....

Chosen Solution My LG G4 keeps turning off by itself, or freezes then turns off by itself and now it freezes on the reboot page where it shows the LG logo on it. When I tried to factory reset it manually with the buttons it froze on the confirm page. What do I do to fix it? Are you able to enter safe mode? You may have malware installed on your device that is causing this nonsense....

Chosen Solution I recently took my iPhone 6 apart in order to fix a sticky power button. Before I did this the screen was working perfectly and afterwards it is completely black, no backlight or anything. The screen definitely works works because I have tested it on a known good device and it is still fully functional. All the connectors on my device do not seem visibly damaged at all. When connected to iTunes the phone is recognised as being connected and acts as it normally should on the computer although the screen still remains black on the phone....

Chosen Solution Hello I recently repaired an iPhone 3GS. When I had connected the last of the ribbon cables, i turned the phone on. It worked, but it was extremely dim (practically black). I managed to make it to settings and adjust the brightness, but neither sliding it all the way up or all the way down had any effect. Then, when i disconnected the display and tried to connect it again, nothing was displayed at all!...