Posts

Chosen Solution Hello everyone, So at first, I thought the issue was the battery, I assumed it was getting emptied faster than usual due to its age. So I did a simple test, I charged fully and didn’t use it for couple of weeks to see if it would discharge anyway but it didn’t. Later I realized that if I leave it on the ‘waiting for connecting stage’ and I let it auto-turn off (I guess this feature is there for battery saving when going idle) It won’t turn on again until I plug it in the charger, 3 seconds of charge is enough to revive....

Chosen Solution Hi. My 3yr old Samsung LED UN50H6203AFXZA lost the picture, but still has sound and the backlight. I’ve changed the T-Con board with 2 others, changed the Main board and just changed the Power board last night, but nothing has worked. What else can I do on my own? Should I try to replace the cables? My 32" Samsung has not had any problems for 5+years, but am concerned if I should bother with another Samsung…....

Chosen Solution a question? If everything is measured and it is perfect, what would be the step to follow where would the problem be in the Flex? because I have the same problem, the iMac 21.5 Late 2013 14.1 starts normally but you can see very little of the image of the apple when it is starting Now, I did tests with another iMac 21.5 Late 2012 and I get the same problem, the screen is dark, it is impossible for me to believe that something on the Board has been damaged in both iMacs @iphix Update (09/16/2022) I will have to do the measurement on the board to be sure, my board is 820-3588-A @oldturkey03...

Chosen Solution Washer only fills up washes then stops it wobt drain rinse or spin. Cause 1 Lid Switch Assembly The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it....

Chosen Solution So as my mom told me she was using Her iPhone 7 plus like every other normal day until a message appeared that the phone was overheating and needed to rest my mom left the phone for 20 minutes and came back she didn’t notice anything wrong with it until she tried to use the rear camera it didn’t work just a black image appeared then she found out that neither does the flashlight work....

Chosen Solution I have my phone set to the Loud profile, but whenever I receive an incoming call it automatically shifts to Silent mode and only vibrates but doesn’t ring. I had this happen with one of my older phones. Is it possible that it is only when a certain person or certain group of people calls? I couldn’t figure out why this was happening with my old Nokia, then I realized that it only happened when I was receiving calls from all of the people in a certain group on the phone....

Chosen Solution iPhone 6S 64 GB iOS 11.4.1 Hi everyone, My iPhone 6S recently started having some issues such as the Vibration and Speaker not working properly. Another thing is whenever audio is attempting to be played, only “noise” comes out of the speaker very quietly. For example, if I lock the iPhone, there should be an Audio sound of the Lock button. However, there is only noise. Another big issue is whenever I switch between Ringer/Silent, the iPhone hiccups/lags....

Chosen Solution after switching on my mobile there shows ‘installing software update. please do not interrupt’. it’s taking lot of time. how do i get out of this? I believe that the only way to repair is by flashing it. You can read more about it on here and a video here that will show you how to reset it to factory defaults. The problem with all of this is that you are going to lose your files on the device that are not backed up…....

Chosen Solution After use, my screen becomes foggy and difficult to see. Is there anything to be done about this issue? Your watch may have some water in it. I suggest you open the watch up and clean the screen. If it is still foggy, follow the screen replacement guide on this wiki. You can replace the screen you can find a tutorial in youtube

Chosen Solution Why is my tablet not turning on? Make sure your tablet is fully charged. If it is fully charged and unresponsive, it could be that the power button has become dislodged within the device and needs to be reset. Can you provide any more information about the tab such as the brand and model? Something you can try is to plug in the charger for about 15 to 20 minutes then hold the power button for 10-20 seconds....

Chosen Solution I rescently purchased the Whomping willow tree game from the Harry Potter range. When I had put in new batteries and fully assembled the tree then pressed the start button. The nosies were like only thing that was happening it just wouldn’t move. Its the motor, try to move the tree back in forth and see if it will start up, if you here any grinding turn it off the motor is burning out, and needs to be replaced....

Chosen Solution I checked the batts, even tried new ones and still it wont turn on. Is there some explanation for this? I really confusing and i really would like to know the problem before i buy a new one Check the battery contacts for corrosion - typewriter eraser pencils are ideal for polishing the contacts. The ON/OFF switch can fail - try pushing down as you slide the switch. The switch can be repaired for less than the cost of a new flashgun, as long as you don’t go to Canon that is…

Chosen Solution After i change lcd flexible cable on my laptop suddently laptop power on and spark show up on near lcd port on motherbboard. After that my lcd laptop not displaying anything. But if i move it lcd screen on other laptop lcd work perfectly. So, can it still be repaired? Sorry for bad language. Update (11/04/2018) This is the damaged motherboard Black above lcd port Sounds like a bad cable repair has “blown” a part....

Chosen Solution My moto 360 shuts off when I use it for a few moments, even with full battery. It only turns on again when I put it in it’s charger again. What’s the problem? How can I fix this? Hi, The battery in the watch is failing to hold its’ charge. It needs to be replaced. Even rechargeable batteries have a life span. Here is the Ifixit guide on how to replace the battery in your watch....

Chosen Solution I am the owner of a narcoleptic 15" Powerbook G4 circa 2005. I just recently took the plunge and did open heart surgery on it and plucked out the temperature sensor. Put the computer back together, and it now won’t turn on. The green light on the batter is flashing green when it is plugged into the wall. Any suggestions? Please look over my answer on on this narcoleptic Mac: How do I diagnose a narcoleptic Mac?...

Chosen Solution Hey guys, I recently did a screen replacement on an iPhone 5c. Nothing out of the norm. However, during the swap, the phone started vibrating uncontrollably with no screen connected to it. I disconnected the battery until the repair was done and then, obviously, reconnected the battery. As soon as it came back on, it was vibrating uncontrollably again. I reset the device and it seemed to have made it stop for the time being....

Chosen Solution I dropped my phone last night and i tried turning it on but it wouldnt. I then put it on the charger and it kept vibrating and showing me the lightning charging logo. I held the power button to turn it on and it did but then as soon as it did it glitched and turned back off. I resetted it and everything and tried to power it on but it still glitches after a minute or two then turns off....

Chosen Solution I am trying to open up the play store to upgrade everything and it will not load Go to Settings –> Apps –> Play store click force stop uninstall updates (if its there) delete data Restart the device and try again

Chosen Solution My iPhone has been jailbreak for about a week..then after that my wifi goes with this prob..i can detect signal,but cant connect..‘unable connect network’ message pop up..is it hardware or software failure..i hv try everything..even open my i phone..i dont know what ti fix..help me reset the network it may work if not then 1.change wifi password 2.unplug router 3.reset network settings(dont search for wifi yet) 4.plug back in router 5....

Chosen Solution I’m interested in possibly installing bluetooth and wifi modules in this iMac. Before doing so, I thought I’d see if this model can use newer airport extreme cards as well as bluetooth 2.0/2.1+EDR modules. Any chance the connectors and such will allow for this? TIA! :-) This machine uses the AirPort Extreme card: [linked product missing or disabled: IF143-001-1] Here’s the bluetooth card: iMac G5 17" EMC 1989 or 20" EMC 2008 Bluetooth Card The 1WXCVR-USB 1 Watt USB Transceiver will give you ten times the wireless range: http://www....