Chosen Solution So the motherboard it came with was dead. I replaced it and the CPU with a brand new Pentium M CPU. I hit the power button, fan on cpu spins briefly then stops, hard drive spins, dvd/cd drive boots, and power on indicator turns on. Nothing shows up on screen and it just sits there with the hard drive running. Any idea? Very late response: I learned the boards on these are not reliable....
Chosen Solution I will try and keep this question short. Before leaving for vacation I unplugged my power cord to protect from lightning or other power fluctuations. After returning I promptly plugged my computer in and waited for the battery to recharge. Unfortunately my computer will not turn on after charging the battery, resetting the NVRAM, SMB, etc. I was using the computer just before leaving so physical damage is ruled out....
Chosen Solution I have a Wii in for repair. When I plug it in, red power light comes on. Try to power it on, red power light goes out, blue tray light blinks, then nothing. I’m using my power cord which is good. I tried the “Reset Adapter” even though we know my power cord has not tripped. I’ve not disassembled the console yet. Any suggestions on where to look? Internal power supply unit?...
Chosen Solution The orangeish peices where the charger connects to the iPhone are broken bent and out of shape, is there anyway I could replace this particular part? My phone won’t charge at all even when I hold the charger in place. djcollins94, I believe you are talking about your dock connector. Take a look at this It does show you how to change it. The part is available here and many other places…....
Chosen Solution My MacBook Pro won’t turn on with battery or adapter. I’ve tried the method of holding the power button with no power to it for Ten seconds and then plugging everything back in. That worked a few times and it was fine as long as it was on and had power. If the battery power got too low or if I shut if off its tough to get it started now....
Chosen Solution My BLU Studio 5.0 C won’t turn on, I’ve tried taking the battery out & putting it back in, taking the sim & the memory card out and trying to turn it on then but it won’t work. It turns on but only gets as far as BLU, the start up screen, and won’t go any further. Can someone suggest something that might help? I’m really stuck without a phone feels like I’ve lost a limb!...
Chosen Solution I replaced a screen on a galaxy s8. In the process i cut through the proximity sensor cable. When i put the phone back together minus the proximity sensor, until the new one gets here, the phone says no sim. The weird part about it is that the iccid number shows up in the settings when the card is inserted so it has to be reading it. I figured it out....
Chosen Solution Would it work, I know the specifications are different but just wanted to see if anyone had tried it. Also I am referring to the front facing camera (selfie camera). Thanks! No, they have different FPC connectors and different flex shapes for the sensors. iPhone 6 FCAM iPhone SE FCAM
Chosen Solution Hello there, A while back one of the components on my SSD got fried up to a point where I can’t tell what it was or what part number it had written on it. Can someone please tell me what this was and if I could buy one online? Sadly, the SanDisk drives are not repairable! You’ll need to get a replacement drive OWC Aura Pro 6G SSD Here’s a good reference on the different Apple drives!...
Chosen Solution I have a 65ub9500ua with no backlights black screen and no sound no picture no matter what I do I have replaced the power board and main board still not working any ideas James Cella let us know if the power light come on. It would also be good to know what you originally checked before changing the boards. The last board left ( there re actually 2 more but they should not cause these issues:-)would be the T-con board so might as well focus on that as well as the LVDS cables....
Chosen Solution so i swapped my slighting connector, headphone jack, and now i dont get a service, but when i plug my old one back in i do my bet is the new charging port isn’t making proper connection with the antenna. try adjusting the antenna contact.
Chosen Solution I need a t-con board for an rca sld65a55rq but the boards I’m finding by the tv model number do not look like mine. The pics of mine are below. I found some using the board number but the printed number to the right isn’t the same and I don’t know what that one means (1440 on the pic). Does anyone know if that matters, or could point me towards the correct board?...
Chosen Solution I have a Kenmore front load washer model # 592.4903. I put a load of sheets in to wash and the machine quit working and would not drain part way through the wash cycle. The error code came up as nd . I think it is probably plugged with dog hair but how do I clean it out? The nd error code on your Kenmore front-load washermeans water isn’t draining from the washer....
Chosen Solution My laptop is not getting started. I plugged the charger but too it is not responding. The charger is showing a blue light which means it is receiving Current. But too my laptop is not getting started…. What should i do? Test your charger with a multi meter to ensure there is actually power lights can be wrong . If it tests out ok check the power port on the computer to see if its loose or damaged in any way ....
Chosen Solution Hi all. I have a MI max 2 . From some days it is turning off automatically at any moment. I performed a factory reset two times but it didn’t help. Please suggest me some solutions. Hi, It looks like there is a problem with the battery. Try replacing the battery and then check. Here’s a video that shows how to do this. Replacement batteries are available online. Just search for Xiaomi Mi Max 2 battery to get results for suppliers....
Chosen Solution Sometimes when I turn on my phone, it gives me a screen that says Factory Mode. I can’t get out of this black and white screen. I tried shutting it down, pressing volume buttons, and pressing volume buttons and power button, but it doesn’t do anything. Sometimes it randomly changes screens. Right now, it’s showing me Test Report: { } Version { } Keys { } Touch Panel { ] LCD Color [ ] LCD Contrast [ ] Memory Card [ ] SIM1 Detect [ ] SIM2 Detect [ ] Vibrator [ ] LED [ ] Speaker Test [ ] Loopback [ ] Receiver [ ] Headset [ ] G-Sensor Calibration [ ] G-Sensor [ ] PS Calibration [ ] ALS/PS [ ] Main Camera [ ] Sub Camera [ ] GPS-power [ ] FM Radio [ ] Bluetooth [ ] Wi-Fi [ ] USB [ ] Battery & Charger [ ] Idle Current Back I am able to navigate through the options by pressing the volume buttons, but other than that I cannot do anything else....
Chosen Solution My dryer keeps blowing the Thermal Fuse and is overheating. The clothes come out extremely hot. Not sure what to do? Suggestions will be helpful. Hi @tinamr89 This first couple of answers in this link may be of some help Why is my dryer is overheating….
Chosen Solution My apple laserwriter is jamming paper in the front behind the toner and in the back help please. Ensure your paper is static free. Fluff it from four directions. Try putting a shim in the paper tray under the papers front edge to give it more lift. Often the springs weaken over time and the paper is too low for the grippers to grab. You might roughen/deglaze the pickup rollers with an old eraser or emory board (fingernail file)....
Chosen Solution my set is totally charged but still there is no display in it..and i cant even turn it off..what should i do? Try reseting the phone by holding the middle & power buttons together for 5 seconds. it didnt work on my x10i.. please help me! i purchased a new LCD for my xperia but still, there’s no display.. what should i do? thank you!!! it helped me………… what is the reason why suddenly the phone has no display?...
Chosen Solution Over time my sync button on the left side if my console worked but now it’s gone. When I press the button on the left side it makes a ding noise but the console symbol suppose to blink indicates in trying to sync. My controllers work when I press it but not the console button. I have to play with my controllers wired but I really need help with this to have it fixed....
