Posts

Chosen Solution We put in our disc and pressed play but it says disc cannot be read. How can I fix this? Hello, Sorry to hear about your trouble. It is not uncommon for Blu-Ray Disc Drives to fail, especially in devices like a playstation. The reason why these fail can vary from device to device, based on use, location, age, many reason. One sure indication though that this is simply a failed Disc Drive is the error messages “Disc Cannot Be Read”....

Chosen Solution My blender seems to be properly powered on, but my food does not have the right consistency. Ninja blenders handle some foods better than others. I would check the instructions in the company’s user manual to make sure that you are blending foods that the Ninja can handle. The size of the food chunks might be too big or too small. If your blended product is too thick, cut the food into smaller pieces....

Chosen Solution I watched some tips on the youtube which showed how to replace the battery briefly without removing the LCD. I did exactly the process with holding the LCD 90 degree throughout the time replacing. When I assembled the phone, I figured out that my front camera just show a black screen and couldn’t take any photo, It still fine when switch the rear camera to the front camera, and the rear camera was fine....

Chosen Solution A few days ago it started feeling very hot to the touch and sounds really loud, like a fan that’s hitting something I did the same but in my case I had to reset the SMC (This parameter controls the fans and other functions such as video) here is the link to Apple for the reboot and tell me how you did, I like to help. http://support.apple.com/kb/ht3964

Chosen Solution I recently replaced my Nokia‘s battery at an authorised service centre. Even though the battery is working properly, I’m experiencing troubles with Wi-Fi and Bluetooth connectivity. The distance I can roam around the router has reduced significantly and the same issue is also experienced with my Bluetooth earphones. I cannot conclude whether this is a software issue or some mishandling while hardware reassembly. Any help would be appreciated....

Chosen Solution The ultranav cursor does not respond or move when trying to use ultranav.. Hi, If you are running Win 10 have you checked that you have the latest Ultranav drivers installed? Here is a link to the download page for the driver for your laptop. In the component selection box (half way down the page, select Mouse and Keyboard. In the Operating System box next to it select Win 10 32 bit....

Chosen Solution Whenever I run, swim or bike with my Vivoactive, the watch is showing wrong pace and distance. If you are in a location that where it is difficult to receive a satellite signal, enabling GLONASS can provide more accurate activity tracking. Also, if the watch has its auto pause feature turned on, it may be unable to sense and record data for the particular activity and pace. Lastly, you should also check to ensure that any accessories (like a heart rate monitor) are correctly paired with your Vivoactive....

Chosen Solution Hi, My MacBook Air 2010 screen flickers everytime I move it up and down, and sometimes it will change colour. Do I need to replace the Display? or is it a faulty cable? or something else? I’ll wait for your answers, TIA Hard to tell from what you’ve stated here. I would pop off the bottom cover and inspect the display connector as seen here: You’ll want to follow the IFIXIT guide: MacBook Air 13" Late 2010 Display Assembly Replacement....

Chosen Solution My phone only shows the Samsung Logo after i factory reset it and does not fully activate. I left it for a whole day and it only showed the start up logo. Doesnt wanna switch off when i hold the power button and if i take the battery out and switch it on…it goes back to the Samsung Logo. If the above answer does not help try this: That is a software issue either one of these should work....

Chosen Solution My Samsung Galaxy S II gt-i9100 phone switched off by itself.I had bought it second hand.The previous owner had rooted it.It was running a nightly build Cyanogenmod OS(ICS Android). I put it on charge for more than an hour but didn’t switch on even then.Tried different batteries.Didn’t work.Tried to start it in recovery mode by pressing volume down+power+home buttons.Nothing happened.It has not taken any impact and never been dropped in water....

Chosen Solution it has power and will start to turn on but it wont go passed the start up screens Hi, Try to reset the tablet and see if this resolves the problem. Be aware that by doing this (if it works) you’ll erase all your data and downloaded apps. The tablet will be restored to its’ default factory condition. Ensure that the device is turned off. Press and hold the Power button until it goes to the Recovery mode and then release the Power button Use the Volume Up/Down to select the factory reset option, then press the Power button....

Chosen Solution Hey there any help would be appreciated, so my wife dropped her iPhone in the bath tub and she let it dry plugged it up and it cut on briefly then just quit completely and i ordered a battery but it didnt help… I thought about buy a different mother board but i dont want to unless i know itd fix it so any advice is greatly appreciated. Thanks...

Chosen Solution Hello, I have a MacBook Pro 2011 15’’ i7 2.0ghz, 16GB (1600mhz) RAM, 1 HDD in caddy and 1 SSD. The AMD GPU is broken, and I don’t want to buy a new one of this model because, you know, AMD… I was thinking if I buy this logic board: MacBook Pro 15" Unibody (Mid 2012) 2.3 GHz Logic Board Will it fit into my Macbook? This way I get rid of the junk AMD GPU and get an upgrade of CPU, GPU and USB....

Chosen Solution If I use a usb c(non thunderbolt) connector to a thunderbolt 3 to thunder bolt 2 adapter, will I be able to use a thunder bolt display? Update (06/05/2017) I just realized what i said was completely retarted, let me phrase it. the connector is a thunder bolt 2 connector, I’m trying to convert the usb c port on my computer to a thunder bolt 2. I was wondering if i could use a thunder bolt 3 to thunder bolt 2 cable, since thunder bolt 3 is i think the same as usb c?...

Chosen Solution Does anyone know if AT&T will work on a Straight talk sold iPhone 5S? Straight talk is a MVNO of AT&T and I can put a AT&T sim in it without the phone rejecting it but any other SIMS and it will say it isn’t supported under the activation policy. I don’t use AT&T so I don’t have an active AT&T sim to test cellular. I’m just wondering if anyone has tried it and it worked?...

Chosen Solution Is there an internal battery That I can change for my device to hold a charge Look on this page for the different repair guides iPod Original Repair You can find replacement batteries in the ifixit store or on ebay. If your device is a 2-4 years old and you have used it frequently then I think your battery needs replacement.

Chosen Solution I know there is some Lightning to headphone adapters that split the connector into a Lightning port and a headphone jack. Is there enough empty space in the phone (or enough empty space from removing something not necessary) to add a headphone jack and the chip from one of those adapters? Would it be possible to then de-solder the Lightning port and solder the adapter to it, then re-add the port connected to the adapter?...

Chosen Solution Hello, I have a MacBook Pro from 2012, A1398. The following keys are no longer working. left shiftleft ctrlleft altleft cmdright shiftF1 - F9 On an external keyboard these keys are working. SMC reset is not possible as the according keys do not work. Any idea except exchanging the keyboard? Thank you Update (11/21/2020) Thank you Dan. Actually I replaced the battery yesterday and the problem has started. Could you please describe where the battery should touch the keyboard cable....

Chosen Solution So a day ago I spilled a little water on my laptop’s keyboard. I checked most of the keys and I found only 2 and A don’t work. Today I checked again and 3 has also kicked the bucket. Am I screwed or do I need something to dry the water? I haven’t tried anything except keeping the lid open and placing it upside down on a slant. Please tell me if I need to replace it or I can keep the current keyboard....

Chosen Solution trying to fix this macbook pro with no trackpad and keyboard also after fit in to another case…logic board?! thank for any suggestion! There is something likely wrong with the USB controller or the PP3V3_S4_TPAD (I can’t recall if that’s the exact name) voltage rail on the motherboard. Check the keyboard and trackpad connector area for corrosion, and the USB controller area.