Chosen Solution My infinix note8i is vibrateing why My phone fell inside water and his vibrateing My phone vibrate I want to no why infinix note 8i This can be as a result of calibration, if no incoming call or text message.
Chosen Solution This morning I tried to turn on my Pebble and nothing happened. I tried connecting it to the charger and waiting a few hours, but it wouldn’t power on at all and still won’t. What should I do? Make sure that your charger is plugged in and working properly. The problem could be that your watch needs charging and the charger is broken or not connecting right. Try cleaning the contact points on the charger and the device with rubbing alcohol....
Chosen Solution I installed a airport card into my machine, selected my wifi network, but when i tried to go to any website it says, “the specified server could not be found”. What should i do? The computer has internet explorer 5:2 and running Mac OSX 10.2 It could be any number of problems. OS 10.2 is obsolete and does not support modern wireless encryption, so it may not be working with the security settings you have in place on your router....
Chosen Solution Hello guys Ive got a macbook pro 2010 with a broken battery light cable. The one that shows you how much charge you have in your battery if you press the little silver button (it’s part number: 821-0828-A). I clumsily broke the flimsy little thing and now I can’t get the machine to power in at all. I need to know if this is coincidental, or if this cable prevents the machine from powering on at all....
Chosen Solution I have a MacBook Pro (15-inch Late 2011) Is there a hard drive SATA cable replacement for it? Update (12/02/2019) The OS is Lion. Yes there is a replacement, but the cable on this model usually does not fail as it is protected by the notch it fits into: MacBook Pro 15" Unibody (Mid 2009-Late 2011) Hard Drive Cable MacBook Pro 15" Unibody Late 2011 Hard Drive/IR Sensor Cable Replacement UPDATE 12/2/19 Pre-Installed MacOS:X 10....
Chosen Solution As I have read in many other threads, I could see that it is able to install a mSATA drive into Lenovo X220. But what I wondered and couldn’t find the answer is, will install mSATA drive will replace or disable the Wireless function? Because I saw that many thread told to replace the mSATA for the Wireless Card. That Wireless card, is WWAN card, or the WLAN card?...
Chosen Solution Yes i have replaced the power supply and got the same result. Sorry for the delay is answering you had to talk with a friend what fixes these logic boards more than me. The logic board has a few voltage regulators to create lower voltages than what the power supply offers. Its one of these regulators that has failed. Sadly, without doing a deep dive into debugging the logic board there is just no way to isolate out whats failed here, besides Apple uses a lot of custom chips....
Chosen Solution I have replaced T-Con board, Main board, and all cables and the problem still has not resolved itself. What should I try next? Pictures: Conor Dolan you need to check your boards to ensure they have the proper output/input etc. Just replacing boards can be expensive and may not resolve any issues. If you replaced the T-con Board and the Main board then the only thing left for now is the power board....
Chosen Solution Hello I recently drop my phone into the water. Everything work beside the sound reciever, now I can’t call other people because they can’t hear me. Where can I find the part? Where will replace this part for me? Thank you Other people can’t hear you proves that your MIC is broken. The microphone of M8 is on the USB board, so you may need to try to replace M8 USb board at first....
Chosen Solution Spilt a little soda on top of xbox now powers on and shuts off what do I do Hi @redrum78 The impurities in the liquid causes corrosion and provides circuit paths for the electricity which were not in the console’s operating design and could damage the components. The corrosion starts immediately and is ongoing until it is completely cleaned away First disconnect the power from the console to minimize any further damage Then you need to dis-assemble the console and clean all the affected parts using Isopropyl Alcohol 99%+ (available at electronics parts stores) to remove all traces of corrosion and any remaining liquid....
Chosen Solution Hello, Is it possible to upgrade the SSD in the latest MacBook Air (2018) model, or has Apple soldered it making this impossible? Thanks… The 2017 model uses the exact same design as the 2015 model. The only difference was an upgraded CPU chip as Intel stopped producing the chip Apple was using. Here’s the IFIXIT guide you’ll need to follow: MacBook Air 13" Early 2015 SSD Replacement and here’s the needed SSD [linked product missing or disabled: IF123-123-1]
Chosen Solution My phone will not turn on past the apple logo, and restarting does nothing but go back to the logo. It has sat on the apple logo for hours. I put it in recovery mode and it would not connect to itunes because it says the phone doesn’t have a driver or no driver found and it won’t install a driver. I need help on what to do, is there any way to install a driver or a different method to solve this problem?...
Chosen Solution External superdrive is dead for some reason. I have a CD stuck inside and can’t figure out how to remove it. Hi! Follow this guide to get to the drive itself, after you remove it, continue disassembling the drive until you get to the CD. Boot up holding down the track pad or holding down the mouse button. If that fails, we’ll go into other means using the console and finally a teardown of the drive....
Chosen Solution Apple eMac G4 start up problems Hi! I recently received an eMac knowing it was faulty and wish to try and fix the problem! I press the ‘power on’ button, it chimes, then accesses a white page with the apple logo and spinning sign and finally gets to the stage of ‘starting Mac OS X…’ but won’t go past this page even after leaving it for nearly an hour....
Chosen Solution when it starts rotating it gives loud noise as if something is struck inside.but nothing is actually there . fit all the screws tight Clean the dust of the blades. When dust build up on top the blades gets thick, it can throw off the balance. This makes something rub when it gets spinning fast. You may also notice a slight wobble when the fan is running. I know this can happen....
Chosen Solution The screen will not work. The touchscreen will, and all interference is comes from the too big screen protector on it due to a hideously cracked screen. I think that the screen cable was dislodged on the impact of that cracking, and was jostled around too much and disconnected. Could this be true? Is it worth it to repair or should I replace it. Oh yeah, the entire chassis is bent at a 3 degree angel from the charger port...
Chosen Solution how do I repair the tv myself Hi This can be fixed, I hope…as long as it’s only the connectors. My Panny Plasma did this after I cleaned it and gave it to my sister when I bought a new TV and a week later it had the split screen with half black. Lots of research later, I found out that the TV has 2 boards that control half the screen each and the connectors between them are no longer working properly, lets fix them shall we?...
Chosen Solution One day, back in 2016-2017, I powered up my PlayStation 3 to play terraria. After a little bit, I had discovered that it shut off! I panicked, and scrambled to turn it back on. I was greeted by a blinking red light followed by 3 quick beeps. My Red Dead Redemption - Undead Nightmare disk was in there! I tried to enter recovery mode, and nothing happened. Luckily this year, my dad manually ejected the game disk and got me a pre-owned PS3 from GameStop....
Chosen Solution already tried changing the signal cable but its dim still it could be that the screen isn’t being as energy efficient as it used to causing a lower max brightness, look if you can find a small flat knob that a phillips head can fit into to adjust the voltage. Have you tried System Restore? Or a Last Known Good Configuration?
Chosen Solution My Samsung J3 Emerge SM-J327P has a few minor cracks on it, but the display is black and unresponsive. I can hear it vibrate when i power it on and when the phone is finished booting up i can hear my notifications and other noises, but the screen is completely black. Sometimes the phone will get stuck in a boot loop and wont turn on fully. Hi, When the phone is on and you can hear notifications etc, try shining a torch at an angle close to the screen to check if you can detect any images on the screen at all....
