Chosen Solution I have been using my WD passport hard drive on a PC laptop and now am switching over to Mac. Even though it has been set up on a PC originally will my passport software work for a macbook? Are there any tricks to switching over and keeping all of my information on my hard drive? That depends on the file format of your Passport. If it is exFAT, the Mac should both read and write to it....
Chosen Solution My Kenwood radio displayed a message saying “miswiring.” What would cause this? Jamie Gilliam this is commonly associated with a short on one of the wires as well as the wiring harness. Measure the voltages, check for proper ground and check the resistance and see what it shows you.
Chosen Solution My nissan cefiro excimo 1995 not car pictured above just started dieng on me at random , its idles drop then car turns of and i have to start her up again it only dies when i come to a stop sometimes or goin to take of slow in traffic just dies at lights randomly and she idles up and then just drops and turns off at traffic etc any ideas what it could be pleaze it turns back on just had new battery put in but it still turning of ?...
Chosen Solution I bought this 55in LG HDTV (1080p) model 55LB5550 about two years ago. Today I had an issue come up with the tv flickering. I tried switching between inputs but still the same problem. I then unplugged and plugged in the component cables and still no luck. I’m wondering why I’m having this issue. From what I have searched other models had the same problem but it requires a “cleaning” of ribbon cables or replacing the power inverter....
Chosen Solution My phone has an led light shining through the phone speaker slot on the front. It has nothing to do with the screen or the rear leds for the phone’s camera. It never shuts off and is on whether the phone is on or off. Hi, Apparently Moto G3s (plus other Moto models) do have a LED behind the speaker grill. http://www.techdroider.com/2015/08/moto-… It supposedly cannot be enabled, but it can if the phone has been rooted....
Chosen Solution When I use the sharpener, the pencil’s point comes out badly off-centered. Or the sharpener is only roughly sharpening my pencil when I try using it. Or my pencil lead keeps breaking instead of sharpening. This is probably due to a dull or worn cutter or a foreign object being jammed in the pencil bore. To fix this problem, you’ll need to replace the worn or dull cutter blade or unplug the sharpener and try using a narrow tool (e....
Chosen Solution Hi, I have recently purchased a secondhand Body, the Camera Works as such but it will not record the images, it stays on the image count the same. is it the Settings, the Lens or the Compact Flash Card? Does the camera format the Compact Flash Card? If not replace the card.
Chosen Solution I’ve had my tablet since Christmas of 2014 and it’s been great for a long time! I love my tablet and I take it everywhere with me. However about two to three months ago my tablet turned off. I’ve plugged it in and have left it alone for months thinking that the problem would fix itself but it hasn’t. I don’t know how to turn my tablet back on....
Chosen Solution My TRIO Stealth G4 10.1 WI-FI switch will NOT turn on. I have tried a Factory Reset, but DID NOT fix the problem. IOS is Android 4.4.2 KitKat, and Kernel Version is 3.3.0. Ideas? Here is what I did, and it worked. Power DOWN the device Press and HOLD the RESET and ON/OFF buttons until the device powers up. Check WI-FI in your SETTINGS to verify correction. ***CAUTION: REPEATING THESE STEPS WILL REVERSE CORRECTION!...
Chosen Solution My washer will not fill on any setting, but will spin. Outside temps have been very cold. Have tried hose thawing measures with no change. To see if it is getting water disconnect the hoses from the faucets (after shutting them off) and slowly open with a bucket to catch any water. If you get nothing wait for the spring thaw.
Chosen Solution The drill will not switch to impact when drilling Steve, If your drill is indeed switchable and not just a impact driver, if the hammer mode switch feels sloppy or to easy to switch, the switch has came out of position or broken a tab inside drill. If switch seems normal but you are not getting hammer mode the wing disc and gear could be seized, worn or broke....
Chosen Solution We snapped the power button cable. We’ve done this before on 2015 iMac and we were able to solder the cable together and reseat the power button with no issues. My question is will a power button from a 2015 iMac fit into a 2019? I gauges the parts and wire and they look identical to a T: screw holes, cable placement, etc The power button is a simple blister switch which shorting the line to ground, just like the MacBook Pro’s (2015 and older) keyboards do....
Chosen Solution I have a 24” 2009 iMac that I’m trying to replace the original HDD with a Western Digital Blue 250GB SSD. With the SSD in an external case the iMac sees it just fine and I was able to install OS 10.11 on it and even boot from it that way. When I install it in the iMac it won’t boot from it at all. I just get a white screen with no flashing question mark?...
Chosen Solution Hi can anyone advise please? my iMac won’t start up. I have mains power to the psu and the following DC output voltages on pins 1 to 16 But nothing else picture sounds etc it’s completely dead. psu board ref ADP-310 AF B 614-0476 China Pin 1 earth pin 2 2.7mv & 1.2v when output plug disconnected pin 3 earth pin 4 11.92v pin 5 earth pin 6 1....
Chosen Solution wont turn on has5 red blinks on front panel @jjk491200 the 5 blink error code can have quite a few different causes. Ranging from the T-con board to the panel and few things in between. Besides the great answer from @jayeff you also want to dig a little deeper. If you have the original TV remote than try to see if this will work on your set: In standby mode, press the following buttons on the Sony remote: DISPLAY…....
Chosen Solution My Motorola xt 1575 wont turn on after battery replaced but LED light turned on when I plugged into charger and I can get bootloader mode when it plugged on to the charger charger unplugged device turned off PLEASE HELP ME TO FIX THIS please tell me to this is battery problem or motherboard problem If the device turns off right after unplugging it from the charger it indicates that the battery is faulty or it is not connected correctly....
Chosen Solution My grandson spilled lemonade on his 2ds and now there’s a stain on the touch screen and it doesn’t respond. The screen displays fine. Any thing I can do to clean it? Also, how do I open it. I had the exact same problem with my 3ds if fixed it by: Taking off my screen protector. Wiping the screen with a lint free cloth. Gently brushing the edges of the screen with a toothbrush....
Chosen Solution I have a blinking folder with ?. Tried Comm+R nothing happened Tried Option/alt +R nothing happened. What do I do next? CMD+OPTION+R CMD+P+R Try one of these, still no results? Buy a hard-disk and an external hard disk reader (You will lose your data!) -Jup :)
Chosen Solution So I recently updated my laptop to the newest version of Catalina, 10.15.7 update 2. everything was working fine until I went to open an app. It wouldn’t actually open and when I tried to ‘quit’ it, it wouldn’t quit. It was basically stuck and invisible. So I opened “applications” in finder to go and delete the app but none of the apps showed up after waiting for about a minute....
Chosen Solution will run fine then starts acting up.if i turn it off and restart it runs fine for a while looses power Check your trans fluid level. This is done when the motor is running and warmed up,check the smell of the oil If it smells burnt there could be more problems.Check the color it should be pink (Red) if its browning change it. hope this helps
