Posts

Chosen Solution So obviously, every MacBook before 2020 has a butterfly keyboard but now that they support magic keyboards again, can they replace my entire keyboard with a magic keyboard if I pay them to? Sorry the mechanics of the butterfly keys is very different from the older (magic) scissor keys Apple is now using again. There is no way to effectively convert the 2019 and older system to the Magic Keyboard keys....

Chosen Solution I had read about error 53 where issues with the touch ID would cause the iPhone to show error 53. I have read that this error was removed last year. I was repairing my iPhone 6 Plus shattered phone last week and accidently broke the Touch ID cable and have been using the assistive touch ever since. I would like to upgrade from 11.0.3 to 11.1 when it comes out and would like to know if it is safe to do so over the air (without using itunes) and not get any iPhone bricking error....

Chosen Solution Green light on but will not turn on Take a look at the Troubleshooting Guide – the first step would be to try pressing the “Reset” button that is located on the bottom of the device above the SD card slot. Red Cross flashing when turned on frozen Tomtom will not turn on model #4EN52Z 1230. H.ave tried recharging. still not working. checked usp cable

Chosen Solution Ok so i asked Activision. which they told me to just give them money and send in the foot pedal. this is really my last option so i decided to make an account here. When i was moving my drums, the foot pedal was knocked of and stripped the wires right out. I then took it apart, and the sensor is ok. but i need to resolder the wires on....

Chosen Solution Unfortunately, I’ve acquired a neglected yard tractor / mower with multiple issues. I’ve yet not bothered to try to start it because of: a) two ruined tires and b) the rear wheels or differential are frozen or jammed or …??? On the ground, that makes it impossible to move the tractor without dragging it. That’s not fun. Add in the two expired cracked tires and it’s REALLY no fun....

Chosen Solution Washer works fine until it has 19 minutes left. Then the timer won’t go down any further Cause 1 Lid Switch Assembly The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it....

Chosen Solution HELLO- My name is Colin Camp. I have a macpro using a flash SSD Drive - I think it’s a aura pro 6g - it’s not the type Flash ssd drive in mac air but close- the connector is slightly bigger- in any event- I need to pull it out of my system b/c lightning hit my house and killed my mac- I tried to install it in my mac air but like I said- the connector is slightly different so it won’t work- I have usb / enclosures which are great for sata drives but I don’t have any adapters that will accept these type drives ( ssd- flash )....

Chosen Solution Last night my phone suddenly restarted and gave me a notification saying it wasn’t able to confirm that it is powered by a genuine Apple Battery, which is strange since I have never had this phone repaired or had anything changed. After a while, the phone started turning on and off around ever 5 minutes until it eventually just shut down for good. Currently, it is stuck on the apple logo and REFUSES to turn on… I can’t even put it in recovery mode or anything to try to fix it....

Chosen Solution I took a bad fall at my granddaughters graduation and my phone went flying out of my hand. The phone is brand new and my case hadn’t come in and it dented the volume button and is now stuck in safe mode. Can this be fixed ? Thanks nah youll have to replace the volume button assembly. luckily its super easy on your model. have a look online and give it a go yourself if you want

Chosen Solution Why does the power button blink green and orange while the fan is operating yet the CPU is not overheated and the laptop fails to start? try to clean the ram module and the slot it might fix it

Chosen Solution have cinema monitor,plug dont match g4,can it be replaced? possibly with smaller vga type Update (02/28/2017) the back of graphics card,dont have same pin sequence to allow the cinema monitor to work as plug n play,can plug on monitor be replaced or do i need some type of adaptor/convertor? You probably do better just getting a video card with the right video connector like this one: https://eshop.macsales.com/item/ATI%20Te…

Chosen Solution I went to turn on my computer today, but the LCD display never turned on. I know the computer is running because the Windows startup sound plays through the speakers. What can I do? @ibsteed there could be a couple things wrong with your computer , you should try to switch output to external Display. If an external monitor is also not working with the laptop , then the internal graphics card or a cable in your computer may be defective and not the display....

Chosen Solution I changed out the wifi and the cellular antenna, I then asked phone doctors and they said it was the time keeper chip, I was wondering which chip this was, by actual name rather than its nickname, is it the one mentioned in the micro soldering section of I fix it ? Y2 and U7 are the chips to look out for from everything I’ve read. Widespread on the 5C line....

Chosen Solution My IPhone 6s Plus screen was broken, so I order a screen to replace it and after I replaced the old one, my phone wouldn’t show anything on the new screen. I took off the screen and put the old one back to see if it would turn on and it did, so I figured that the new screen was bad, so I ordered another one and replaced it, but it still wouldn’t show me anything....

Chosen Solution My power adapter is overheating when it is plugged into my computer. Astor Moreau sounds like a faulty power adapter. Not much you can do about that unless you rip it apart and check for shortened components.Toshiba is right up there with all the other compaies that treat their schematics like gold. There is no way to get one. My suggestion would be to purchase a replacement, should cost you around $15USD

Chosen Solution Hello everyone, I am a little outdated in apple repair. I am a certified apple repair technician and used to do work at an apple authorized repair center, now I do mostly PC’s instead. I have a problem that has me stumped and I feel like it is something simple I am just missing. I have an Imac that originally came in with a blinking folder indicating a likely failed hard drive (which I confirmed with a hard drive test) When replacing the hard drive, the sata jack became seperated from the board....

Chosen Solution My Keurig Platinum will not start for whatever reason. This is my first time using this model and I have no clue how to get it to start working. Make sure that the Keurig is plugged in, and on the back at the bottom there is a little switch you must push to turn it on. This should start your machine. If not, use a different outlet to use and push switch at bottom on back again....

Chosen Solution I replaced the screen on this iPad generation 5, The replacement went well, as well as an iPad repair can go, but now that I am testing it, the home button won’t respond. The digitizer is working great and everything else is cool. The home button’s cable is not bent, nor does it appear damaged. Has anyone experienced this issue with the 5? I really hate repairing iPads, this might be the last one for me....

Chosen Solution I go on eBay a lot to look for logic boards to repair broken MacBooks and I notice that some people put up water damaged logic boards and they even say it doesn’t work. So why would they post it hoping someone to buy it, what can you do with a completely broken logic board? I’ve even see people bid on it. What is the use of a broken logic board that they sometimes will mention as corroded?...

Chosen Solution No broken parts that can be seen Update Thank you so very much….finally it works !!!!! Voice over was the problem You guys are great :) Karen, try to disable VoiceOver using the Accessibility menu in the Settings application. I think that is what draws the “box” around your icons. That would also mean that your digitizer works since it reacts to your touch. you may not have broken any glass but the touchscreen cable itself....