Posts

Chosen Solution I replaced the whole screen today and the touchscreen still isn’t working. Any ideas? Make sure that your cable for the digitizer is connected completely. Disconnect the battery first, then disconnect and reconnect the cable for the digitizer. This is the cable you should be looking at. Just checking, did you happen to test the screen before completely replacing it? We get some screwy screens all the time, depending on the distributor....

Chosen Solution I have a Samsung UN46d6420uf LED 46inch TV. It is 2 months OLD. i have 3 devices connected to my TV all via HDMI cables. Till last week there was no problem with the TV to display the cable’s HD channels via HDMI cable. After a recent storm in Louisville, My TV is not catching the Digital signals from the cable box and not sure what happened with it as the TV displays “No Signal” Error message....

Chosen Solution When I try to take a picture with the selfie camera it just shows a black screen. The front camera and everything else on the phone work properly. I just recently replaced the charging part on the phone. While replacing the Lightning Port, you probably damaged the FCAM & Sensor Flex (FCAM = Selfie). Take a look at this guide to retrace your steps and see if the flex cable is torn....

Chosen Solution Why is my Kurio Xtreme not charging? I plug it in to the cord which is plugged into the wall, and it still does not charge. The problem could be with the charging cable, the charging port, or the battery. Try using the charging cable on other devices to see if it charges them. The problem could also be that the charging port is loose or broken, which means that you will need to replace it....

Chosen Solution My iPod’s home button is broken, so I can’t force restart. It quit charging, even though it said it was charging, and it now won’t even show the dead battery logo. It might just need charged with an actual Apple charger, but I’m worried that the amount of times I’ve dropped this thing might have finally caught up to me. Probably one of two things. Either you need a new battery, or a new charging port....

Chosen Solution When I hold the power button, the GoPro refuses to turn on. The LCD screen is black and I cannot use the GoPro in any way. Your GoPro Hero5 Black may not be turning on for a number of reasons. Some reasons could be that your SD card is faulty, the battery is dead or damaged, or the battery housing could be faulty.

Chosen Solution wi fi is grayed out in settings Here’s a link to a question with the same issue. Hey Doug, I understand how frustrating this can be because I have experience this problem too. What I do to resolve this issue, turn off and turn on Wi-Fi or forget network and then reconnect again. I hope this helps you. You can read the full instructions here: http://www.technobezz.com/iphone-wont-co…

Chosen Solution I have a Nintendi Wii console which doesnot respond to any input commands from the Wii remotes. It even doesnot power ON with the remote. turning ON the consile using the power button on the console indicates it turned ON ( orange light to green light) however it doesnot provide any video output or take any remote inputs. Inserted the disk and it took it in with a single blink of blue light....

Chosen Solution Since purchasing our home, we notice that the windows get very wet. We replaced old single pane windows thinking that this would fix the issue. it did not. I must wipe windows each day and now have a dehumidifier running to capture the water. Any suggestions on what could be causing this & how to fix would be appreciated.. Thx Theresa Your condensation is caused by the warm, moisture laden air moving toward the cooler window or door wall, “it becomes cooler and cannot hold the moisture it held when it was warm....

Chosen Solution windows security centre service is not getting on.why please suggest me? sid, The Security Center service can’t be started" error message in Windows 7,8,10 or in Windows Vista. Check the attached links,instruction and guides for resolution, Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://support.microsoft.com/en-ca/kb/2… http://www.thewindowsclub.com/windows-se… https://support.microsoft.com/en-ca/kb/2…

Chosen Solution I have a heavy-duty Kenmore 70 series washer that I replaced a broken belt. I’ve put it back together and now it won’t spin though it sounds like the motor is spinning the drum and agitator don’t. Some oil did leak out of gear box Most Frequent Causes for Vacuum cleaner belt keeps breaking Cause 1 Brushroll If too much hair, string, or lint is caught in the brushroll, the brushroll can get stuck....

Chosen Solution Hi oldturkey03. I have a Yamaha CLP265GP that needs a couple of new keys. Do you have e a service manual for that model as well by any chance? I think the keyboard itself will be pretty similar to the CLP120 but some instructions about opening the cabinet would be really useful! Thanks very much. nigel.calvert this document Yamaha CLP-265GP should work for you. Thanks that’s really good of you....

Chosen Solution My machine is an HP Zbook 15 G2 operating Win10 Pro 64-bit (ver. 1909) From new, I had an NVIDIA card K1100M Quadro that worked fine, but I now need a card with a higher CUDA rating. I fitted the newer NVIDIA M2000M Quadro, but now I can’t load the NVIDIA drivers (Ver. 461.40) because of an error message saying ‘NVIDIA Installer cannot continue. This NVIDIA graphics driver is not comptible with this version of Widows....

Chosen Solution I was playing a game when the PSP Go accidentaly fell. It wasn’t from a great height and it wasn’t that hard. When I picked it up, the screen was blank so I turned it off for a few minutes and turned it back on. I could hear the startup tone and the XMB clicking when I move the buttons but the screen remains blank. It charges when I connect the charger and even goes to ‘USB mode’ when i connect the cable to my PC but the PSP GO screen remains blank....

Chosen Solution I have an mid 2010 MacBook Pro 13" that shuts off during, or immediately after, startup. Normal startup doesn’t make it through the startup screen. Safe boot or Recovery gets me beyond the startup screen, but within seconds it shuts off. In either case, the screen gets dark (not totally black, just loses about half the light) about halfway through the startup screen. I have reset the SMC and PRAM....

Chosen Solution why is my ice maker making only small amounts of ice Your ice maker has a “feeler arm” which detects the height of the ice in the bin. Once the ice touches that arm it stops making ice. Adjust the feeler arm to a higher level.

Chosen Solution My IPhone 5S is stuck on the lockscreen, and will not let me in. Also I tried rebooting it and it won’t let me If digitizer doesn’t take finger pressure you’ll have to replace your iPhone’s screen.

Chosen Solution i have an ipod classic 80GB. Few days ago, while i was changing it, suddenly it gave me a white screen with this messge " don’t dissconnected" and it still working till the battery went down.then it gave me this message “use itune to restore”. when i used my itune to restore the ipod, it gave me “error 1439”. when i tried to fix it, it won’t work.what happend?...

Chosen Solution I already bout a new battery for my iPhone 6 and it’s not working so well… Is going down more quickly then I expected… Did I do something wrong at putting the battery? Likely a poor quality battery. You can exchange it for a working battery. I would suggest an oem quality one Like this iPhone 6 Battery If you’re unsure about your install, use this iPhone 6 Battery Replacement...

Chosen Solution So I turned on voice command and when I turn it on, it won’t let me slide up the home screen because it keeps talking. How do I fix it if I can’t even get to the settings to turn it off. Hi @mfg , Here’s a link that may be of some help to get back into the phone.