Posts

Chosen Solution Hi I have tried disconnecting device from my iPhone. I turned iPhone on and off. I turned garmin on and off. I also turned bluetooth off on iPhone and on again. The watch shows in settings under bluetooth that the bluetooth is off and no matter how I swipe the screen I can’t move the button to on. Please help Thanks restoring the settings allowed it to work and pairing it went fine from there...

Chosen Solution guys, please help me, l replace the screen and it did not turned on, l plugged it into the itunes аnd it turn on but power button did not work. It’s strange because sound button did work, means cable is not damaged. If it was damaged sound buttons do not work. please help I do not know what to do. P.S sorry for my english I am from Russia....

Chosen Solution when I turn on the printer, it starts up well, but the problem is when it gets ready all the lights (power led, wifi led, adf light) starts to blink and I can not print and copy anything. to me is difficult to know what is happening becuase the display gets blank and does not appear any information about this problem. after all the printer does not do anything… please i need you help...

Chosen Solution I have voicemail properly set up thru Comcast, but when you call the number it will not allow the Comcast voicemail to work. Comcast says it is the phone. I need to get this resolved asap! Hi @mbrandall55 , Are you trying to remotely retrieve any recorded voicemail messages by calling the number with the voicemail facility from the uniden phone? If you are trying to remotely retrieve voicemail messages what happens when you call the number and press the # key on the uniden phone during the voicemail’s recorded greeting?...

Chosen Solution It has been charging, then when I took it off the charge, it didn’t turn off. Also, I am using the new steel series Nimbus “+” —straight from the manual — POWERING ON/OFF To turn the controller on or off press and hold the Home Button. The controller will turn itself off after 15 minutes of inactivity. There is a firmware update available to the Nimbus+ that should fix the issues you are describing....

Chosen Solution One day I just couldn’t get the micro USB cord to insert itself completely into my phone’s charging port, making it inpossible to charge my phone. NP I thought, I’ll just purchase a universal wall charger and bypass the broken port altogether. Problem is that my phone isn’t the type that one can just slide the back cover off & remove then reinsert the battery whenever they fancy. In fact by trying to do so I may have already caused irreversible damage to my phone, ugh!...

Chosen Solution Why won’t my device charge? Check the charging port for any debris that would prevent the charger from connecting properly. Attempt the charge the device with a different charger to verify that the charger isn’t defective or faulty. Leave the phone on the charger for fifteen to thirty minutes before attempting to power the device on.

Chosen Solution I unplugged the Playstation and then plugged it back in–just red light. Then I inserted a Bluray disk and the machine turned on. Screen message: “Cannot start. The correct hard disk was not found.” Nothing else was going on, i.e. no updates, nothing. I did the unplug because Netflix would not load and I thought a reboot could fix that problem. I am very new to this unit–it belongs to my son-in-law–and all I use it for is Netflix movies and Bluray discs....

Chosen Solution I replaced my optical drive but my optical drive will not accept disc. I purchased the console used with the original drive not working at all. I purchased the correct replacement drive. But when I installed the replacement drive it does nothing. All the wires are connected firmly in place. Also I have repaired the data base and reset the console but nothing it’s like the drive is dead....

Chosen Solution my touch screen just stopped working all of a sudden what can i do to fix this? is there any fix for this Probably just need to replug the LCD cable from the back of the tablet and that should do the trick. Back cover is held in by clips and make sure you turn off tablet and unplug internal battery before replugging LCD cable.

Chosen Solution HalloMy iPhone 7 wifi works shortly when i reboot the phone. It works for approx. 1 min before the signal is completely lost. When I look in wifi settings it looks like wifi is still turned on (Button is green) but the phone cant find any wifi signals. When I turn wifi off it wont turn back on. I have read that some people experience “greyed out” wifi. But mine works for a minute before turning off so this seems different....

Chosen Solution Model 110.92593220 Completes wash cycle but stops before rinse cycle with tub full of water. Will work if I manually advance the timer. I have replaced - timer 2x pump control board water level switch transmission and clutch I have checked the continuity of the lid switch. I have almost replaced everything and it’s still doing it! (@jayeff - I replied to your questions on my earlier post but it was removed as spam - I have addressed your questions in this post)...

Chosen Solution Hi, my LCD on my MacBookpro A1175 is broken. I know someone who has a full working display unit (lcd plus screen assembly) for a A1126. The connections look the same (I opened my unit). Do you know if it would work on my macine? Is there a way to find out for sure? Open Terminal and type: ioreg -lw0 | grep IODisplayEDID | sed “/[^<]*</s///” | xxd -p -r | strings -6 It will show you exactly which screen you have....

Chosen Solution My Panasonic TH-P55VT30A has sound but no picture. Any suggestions on how this can be fixed? @kerryn60 what exact model is your TV. Shine a flashlight at an angle against the screen. See if you can make out shadows etc. If so, it is your backlight that has failed. That would be a power board issue. Otherwise it could be anyone of the boards, most likely the power board or T-con board....

Chosen Solution Tablet was dropped in water ,power was on while drying off ,can’t take battery out or take back off was able to open a small spot power was still on i put it in rice til next day ,checked it was no longer on so tried to power on it won’t power on battery dead so put on charger won’t charge red blinking light flashes fast put back in rice for week and a half and checked and started to charge it it powered on after taking charge but can’t do anything can’t turn off can’t swipe off lock screen....

Chosen Solution My iMac turns on but gets stuck on the apple power up screen, it goes to about 80% and stops. How do I fix this? Did you try booting up in macOS recovery? Using Command (⌘)-R on your keyboard. Reference: About macOS Recovery on Intel-based Mac computers

Chosen Solution I don’t know much about computers so I’ll try to make this understandable. My uncle gave me this MacBook, said he never used it, and he didn’t have the charger. I ordered a charger and plugged it up. It chimed and then went to a white logo screen with a spinning loading wheel under it. Is now stuck like that. Looked up a million solutions and absolutely nothing is working....

Chosen Solution Modal bluetooth wireless headphones. They will turn on while they are charging, but they will immediately turn off when disconnected. Hi, The battery is not holding its charge and needs to be replaced. Even rechargeable batteries have a life span. Unfortunately, according to the user guide it has non user replaceable rechargeable battery. If you wish to try and replace the battery, you will have to work out how to open the headphones to find the battery, as there is no information online that I can find that shows how to do this....

Chosen Solution I recently picked up a Surface Pro 4, and I love almost everything about it. There is one behavior, however, that puzzles me. It seems that, when I am holding the device with my hands, the touchscreen is perfectly responsive. When I touch something, even lightly, it recognizes my finger… no issues here. The issue arises when I am not touching the back of the tablet. Let’s say I have it propped up on its kickstand, or resting on a table....

Chosen Solution Hi, I received a beat up MacBook Pro 17" “not charging.” Board # 820-2610-A Here’s what I observed after removing the board from the laptop: With battery connected, the charger will turn bright green then extremely dim green. But disconnect and try again will make the charger light blink once brightly then turn OFF.. try again and I get another erratic response or no light at all, etc. Without battery connected, no light on the charger....