Chosen Solution I replaced the screen on my iPad 4. I cleaned all the old adhesive off with alcohol and let it sit for awhile to make sure it was gone. The applied the screen and let it sit for about an hour then turned it on for a minute to make sure it worked. Then let it sit for another few hour. Both times I weighted it with a couple text books....
Chosen Solution Once I put the game into the DSi and then select the game on the screen. It then says that there is an error before the game can even load up. Then it says to refer to the DSi manual and I don’t have a manual. Is it just one game or all your games. If it is just the one game I would think it is the game itself....
Chosen Solution I Have a DV150F Samsung camera and the lens is out but will not go back into the camera when I turn it off. Check out the answer given in a previous post by @oldturkey03 lens open & close same time Hope this helps
Chosen Solution I was fixing a cracked iphone 5c and when i put the home button back in it can rotate to the sides even when i took glue put it around the spot it didn’t work? I need to make it stop wiggling. Replace the rubber adhesive ring, it’s not that precious. As you no it’s the glues problem on the rubber gasket around the home button if you take it out and heat the rubber with a hair dryer it should activate the stickiness of the adesive again
Chosen Solution Ok my dell xps 15 7590 (7 months old)was making a strong grinding sound. So I called dell support on 18th march and they said they would send an on site technician. But due this f***ing virus outbreak, they said my service will be delayed till april. So i opened the laptop to see that the gpu fan was making that sound. And i tried to clean it with a cloth and broke off 5 blades....
Chosen Solution I am comfortable and confident that I can do the procedure but I am concerned that it would impact my applecare. I’m wondering if there are any ways apple can easily see that I have disassembled my laptop such as any warranty void stickers inside the computer. The machine is new enough the thermal paste is fine. I waited 3-4 years with my Latitude because it was at the point I noticed excessive temperatures and throttling....
Chosen Solution I just bought a xps 13 9350 with the core i5, 8gb’s ram and a 128gb ssd (turns out its the Samsung cm871 m.2). I was planning on replacing the drive immediately with a 512GB and didn’t want to give Dell $500+ or more to do it (plus, I wanted to stick to a non-touchscreen lower res display for better battery life). I bought a Samsung 950 Pro 512gb from amazon and I’m not sure if it will work or not and I can’t find anything online that says definitively that it will or wont?...
Chosen Solution My daughter just ordered a refurbished iPhone 6+ and almost immediately it was glitching out. I contacted the company and they said in order to get a full return ALL the data must be off the phone. Problem is that the phone is stuck in some weird loop between on and off. It’s completely unresponsive. I’ve tried holding the home n power buttons in at the same time but nothing happens....
Chosen Solution Within the past 6-7 years, I have been through 2 powerbook G4’s The first one was a 15" Powerbook Titanium DVI, one morning it wouldn’t start, and I decided to take it to a computer repair place, since i don’t live near an apple store, and they couldn’t fix it, but said that they could try a new logic board, for a few hundred bucks, so i decided to just replace it with a 17" 1....
Chosen Solution Yesterday my iPhone 3gs fell on the floor and the speaker, charging port and mic wouldnt work. I took the front assembly off and noticed the dock connector ribbon had come off so I reconnected it and put it back together and it charged and the mic worked but the speaker still wouldnt.. Then i decided to take out the dock/speaker/mic part and have a look.. So I took the motherboard out and removed it and then the dock bit, had a look at it didnt attempt to mess with it and put the phone back together....
Chosen Solution Hello, I refurbished an old iPhone 6 Plus today and the phone is working properly now. Unfortunately, the assembly back together is giving me issues. I replaced the home button and the new home button works, but the button cannot be physically pressed when fully assembled. It feels stuck. I can slightly loosen the two screws to allow it to work, but I don’t think it was like that before....
Chosen Solution Okay I’m really exhausted, since I’ve been working on this thing since last night and I just have to ask someone for help. My Sony TC-WE475 is screwed. I tried lubricating the capstans and after reassembly everything just got worse. When I turn on the machine, the pause Icon lights up for a few seconds then turns back off. When I press play, the capstans move for a few seconds, but nothing happens, then it just stops....
Chosen Solution Hello, I recently spilled a little water on my keyboard recently. Cleaned it out immeditately after it happen. A week later of not playing on it, I put the charger in and it wouldn’t charge. The only way i got it to work was by connecting and disconnecting it took like 20-30 tries. I tried to clean out the magsafe port and charger with contact cleaner, it made it better by 80% i was able to get the red light indicating it was charging....
Chosen Solution I have an old MacBook where I lost the original SSD when I used a third party one. I now ordered a (presumably refurbished) SSD from the Bookyard advertised as compatible for the same make but 500GB instead of 256. Upon installing it, the machine worked fine for about 5 minutes before shutting down without warning and also without any report upon rebooting successfully. This was repeated a few times, until I gave up....
Chosen Solution I had a corroded battery and need to clean the contacts. This post has detailed steps but I can’t get past step one. The cover just will not come off. I can easily pry up the edges but it feels like there’s something in the middle of the top plate that’s attached and I don’t want to break the mouse. Step one mentions about moving the pick tool along the edge towards the battery cover and mentions a pin I believe....
Chosen Solution Got my iFixit repair kit to fix a cracked digitizer on an iPad Mini 2. Instructions said to cover the screen in packing tape, but the suction cup provided does not adhere to packing tape – not at all. Zero adhesion! So I’m stuck. Any suggestions? The cup will work! The tape you used was not laid down smoothly enough for the cup to grab and/or the tape was textured like duck tape....
Chosen Solution i used my phone to create a message the suddenly it turn off and i cant turn it on again and i cant even charge the phone how could this happen to my very new samsung galaxy grand prime plus Ahmad Borge is it a new phone or just new to you? This could be an issue with a bad battery. If it is new, replace the phone under warranty....
Chosen Solution My surface won’t turn on. What happens: 1.the charger’s light is off 2.the screen is off 3.the home button vibrates when pressed It isn’t in warranty anymore but I can’t afford to replace it and I do not have the right tools to fix it… it might be stuck in standby mode or the screen might be bad. Try a full reset by holding the power button and the volume up for about 15 seconds and see if it will reset to the surface logo- if it does it should boot from there....
Chosen Solution The vacuum smells like its burning whenever I turn on the device. What should I do? Hello, if there is a burning smell coming from your device the first thing you should do is unplug it immediately. Next, you should check to see if you picked up any lit embers such as a cigarette. If that is not the case, then wait a few minutes for the vacuum to cool down before trying to operate again....
Chosen Solution I recently replaced the following parts in an iPhone 5: Lightning connector assemblyPower button/volume control cableLogic board interconnect cable(s) After doing so, the device powers on fine and functions normally. It can even place and receive calls! However, my phone’s service coverage now shows “Searching…” and never indicates actual service bars (AT&T Bars). Any thoughts and possible solutions are greatly appreciated! Thank You! Factory restore did not solve my issue....
