Posts

Chosen Solution Hi my iphone 3g-8gb black had a problem. Before i can enjoy our house’ wifi signal but now, i cannot connect anymore. I never dropped or any incident before it happened. But i can remember turning the wifi router once (saving electricity purposes. And then after turning it on again, i can’t receive any wifi signal anymore. I tried to reset the wifi router thrice. And all of my family’s laptop can receive the wifi signal after resetting the wifi router thrice, but my iphone 3g is not receiving it anymore....

Chosen Solution Okay, I have an odd scenario here. My Ipad2 was able to connect to my regular 2.4G Wifi but not my 5G Network. Then, my son dropped it! So, I ordered a new Wifi antenna along with the digitizer, figured I’d kill 2 birds with one stone. When I first replaced it, and booted up, all was good. One day, after rebooting, the Wifi was disabled. I couldn’t even turn it on....

Chosen Solution So, I have a Samsung SM-T230NU. When I tried to power it on, it flashed for a split second the Samsung Galaxy Tab 4 logo and then went blank. I figured it was out of juice, so I plugged it in and let it charge for an hour or so. When I came back, it was flashing and going dark. I tried a different cable. As soon as power was applied, it flashed and went dark again....

Chosen Solution So I come out to my truck I have not started it in about 3 days and it won’t start I replaced the water pump the alternator and put in a new battery now my truck runs great but only for a day it it doesn’t hold the charge overnight I’ve had to jump it every morning any solutions? Hey there Justin it sounds like you have a paracidic draw this video is an excellent guide to understanding what it is and how to find it https://www....

Chosen Solution I recently pulled one of these out of a junk bin, and everything works fine except for the display backlight. I know that it’s probably the backlight fuse or driver, but just to be sure before I send it to a technician, I want to rule out the possibility of the display backlight being dead. Would I be able to safely plug in a display from a 2009-2012 13" pro to test this?...

Chosen Solution I turned on my camera, but I cannot view the images that I have on file. I am able to able to access the menu on the camera, but not the images. Is their any reason why I am not able to view my images? There can be many reasons why your camera is not displaying images. One of the simplest problems is that your camera does not have a memory card....

Chosen Solution This is an update to an older question I have asked since it was pretty vague. So when I was disconnecting the battery of the phone i used a screwdriver which caused a spark and after that the sound would only work if i pressed the area above the sim card slot. since you say there was a spark when disconnecting the battery you could have maybe damaged the audio amplifier or surrounding components which is on the other side of the board behind the battery connector and has a path to the battery line ( pp_batt_vcc )

Chosen Solution Hi, I installed the the replacement battery successfully however I realised that the cover which covers the connector for the battery is pressing against the phone screen. This is causing a grey mark around the screen where the pressure is. I’ve went to try to take the screws back out to fix the issue but one seems to be stuck. I’ve tried the elastic band method and pulling the suction cup up while screwing however, neither are working....

Chosen Solution This is in regards to a mid-2010 MacBook Pro 13.3". During a repair, I accidentally broke off the connectors on the Logic Board for the subwoofer and fan cables when trying to lift out of the socket. Instead of lifting out of the socket, the whole connector just lifted off the board. The fan connector can be seen here. The subwoofer connector can be seen here. Both of those images are from the iFixit guides....

Chosen Solution It keeps turning off it will be at 100% and I will take it off the charger and I will use it then at like 90% it will turn off repeatedly It may be easily due to a worn out battery..check its condition on Settings/battery. For a more detailed picture you may check with a Mac/PC after downloading Coconut battery (Mac) or 3Utools (PC) and plugging in your iPhone....

Chosen Solution My handset is getting a static/crackling noise that makes it hard to hear whoever I’m talking to. If you have distorted audio over your handset, try adjusting the volume to a lower setting. Having the volume at the max setting may overwork the speaker and cause distortion. If that doesn’t help, try moving closer to the home base to avoid proximity issues.

Chosen Solution Hello, recently I’ve used my s7 to take some underwater shots. The phone has been maybe 20s max under water and ever since then I’ve been having problems with it’s screen. If left for a couple of hours the screen will turn on normally and display everything. But after a few seconds it will start to glitch out. Every single pixel starts changing its colour and the screen becomes rainbow like, then it stays like that until I turn off the screen....

Chosen Solution Hey. I have an iPhone 6s Plus, and recently repaired the screen with an iFixit kit. It worked and I’m thankful, but the screen won’t fully go back into the iPhone. The bottom part sticks out. Is there any way to fix this? Thanks. Make sure that you’ve removed all of the original adhesive from the frame of the device before putting the new screen in. See if the screen will fit into the frame without any adhesive or waterproofing and look for any part of the screen that isn’t resting right....

Chosen Solution the device is unresponsive to touch, after a hard reset it becomes responsive but only lasts for +- 5 minutes, I did a factory reset, and it worked for yet another 5 minutes, managed to update it to the latest software but still becomes unresponsive. Has anyone experienced this before? I keep seeing guys on youtube do a hard reset then claim it’s permanently solved and others changed the main Flexi cable also claiming that the Flexi is faulty from the factory....

Chosen Solution Hey, I have an iphone 8 plus that has wifi grayed out, but will still connect to cellular. Any ideas? I have already reset it entirely and it still didn’t work. Broken wifi chip which requires board level repair, that’s it. Wifi and cellular are unrelated. That sounds like WI-FI chip is damaged or dry soldered.There have two factor that you can solve by this way. Sometime WI-FI chip dry soldered throw over heat that remove PCB from board and re-hot WI-FI chip on 240 aprox 1 min then check most of the cases are solved....

Chosen Solution My ipod isnt turning on and i tried charging it stilll wont turn on I does sound to me like you need a new battery. You can try to charge your ipod on an AC charger and see if it will charge,but ultimately I would change the battery. Not a difficult task and not very expensive. after that you can re-evaluate. Start with the battery, be careful when you open the clip for the battery cable, pull straight up....

Chosen Solution Hi! I wondering that since I got my fat 80GB PS3 repaired from YLOD, does it come back after a little bit because my PS3 turns off while I play a game. Do you think it"s because off an old power supply because I’ve had my PS3 for more than 8 years. If it’s not an old power supply please tell me what else it is. OK thank you!...

Chosen Solution My tv will only work if I unplug the wiring harness from the mother board to the power board @billdance69 when you do that, the only thing working should be the backlight. Let us know exactly what your TV does before you connect the harness. Also give us the complete model number for your TV

Chosen Solution I downloaded something from the Google Play store, and now my touchscreen won’t respond. What do I do? This problem may be due to a 3rd party launcher installation. Please refer to our troubleshooting page for step-by-step instructions on how to fix this problem. Huawei Ideos S7 Slim Troubleshooting

Chosen Solution When I turned mine on I got a wide grey bar on the left side of the display. I powered down, reset the connectors and had the same result https://imgur.com/a/EKag1KI I was incredibly gentle with the display, but the only thing I can think of is I damaged it somehow. Any suggestions? Ouch! Some how you damaged the LCD ribbon cables likely along the edge of the LCD panel....