Chosen Solution I’ve got a fun one… I’ve factory reset the tv (power + volume down) and when powering on I can hear the setup music. Tv dims and gets brighter when pressing buttons but there is no video, just backlight. Usually when turning it on after plugging it in it will only stay on for 5 sec then turn off and flash red 5x. Hitting the power button to turn on again will result in tv staying on but still no video....
Chosen Solution Tell us how to open Sony Xperia R1 plus back cover and battery replacement ? Do I have to use heat gun to remove back cover ? There are multiple videos on YouTube that tells you how to disassemble the phone and change the battery. The use th search and type the name and model of your phone and battery replacement and there are the videos.
Chosen Solution So my mom asked me to replace her screen but after I hooked everything back up the screen wouldn’t light up, however the sound still works because her 6am alarm went off. I’m not understanding this! I’ve changed several screens in the past and never had this problem. Very disappointing. Could be a defective display or if you didn’t disconnect the battery you could’ve blown the backlight circuit. If the old screen was still functional, hook that one back up to see if it works....
Chosen Solution I haven’t been able to find a solution to this for over a year. When I’m on Zoom or FaceTime using internal speakers and mic, I can hear other people but nobody can hear me. Instead of hearing my voice they can hear sounds if I tap on the keys or move the mouse. When I use ear buds, they can hear me but NOT when I use wired earphones....
Chosen Solution “My Canon MG 3500 series printer keeps giving me the message that the ink cartridge door is open and it won’t print. I’ve tried opening and closing it many times, as well as turning on and off the printer. I even tried unplugging it and moving the ink cartridges around a bit. No luck! This is quite a new printer and I hate to put it into electronic waste already....
Chosen Solution Dear colleagues. I have removed the old not working thermal paste from the processor on my macbook 12 retina 2016. Can one recommend the proper substitute ? it should be thick and non conductive and without epsilon since after going outside the cover it can affect even isolated contacts. @zhvladimir - You are correct you need a different kind of thermal material. You need a gapping type one that can span a small distance....
Chosen Solution I’ve been through the forum and I feel a little stupid asking this, but here’s the problem. I’ve had this baby for about a year now, and it had started showing signs early on in. The first time she shut herself off, I took her to the guy who sold it to me and he recommended using SMC FanControl, which worked just fine for me for about 3 months....
Chosen Solution I have a Pokemon Pearl cartridge, and my 3DS will read it, but it won’t play. Pearl’s “Region identifier” thing: NTR-APAE-USA. It’s in a grey cartridge case, but I don’t know what the problem is. I’ve tried it in my DS Lite, and it gives a “Data could not be read” when booting the game up. 3DS gives a message similar to the DS Lite’s “An Error has occurred, Please turn off the system and refer to the instructions manual....
Chosen Solution had code b2278 and replace the torque sensor as per tbs 14-0016 did the calibration and now the wheel turns all the way to the left whenever i let go of the wheel even when the car is not moving there is a video on this page that is very good to explain what has to be done and the accuracy that you need to do it with. https://ford....
Chosen Solution One of the heating pads on my Fahrenheit Flat Iron is not heating up. I have plugged it in to several different outlets to make sure it wasn’t the outlet that was causing the problem. How could I fix this problem without having to replace the whole unit? Hello, Using one of those working outlets, please take notice of whether on not the green and red LEDs are light when the device is powered on....
Chosen Solution My LG model 795.7103 is 6 years old, and was working perfectly until 4 days ago. The temp is set for 40 degrees-frig/zero degrees freezer, but now cools to 50 frig/35 freezer. It’s as if it’s stuck on defrost. A name-brand repairman didn’t find an immediate cause, even after removing freezer drawers and back-of-frig panels, and used his hand-held tester, and was on the phone with someone else much of the time....
Chosen Solution I tried to turn on the camera but my screen is always blank. I tried to change the battery and charge the camera but I still have the problem. Your camera’s screen sounds like it could be damaged. To replace it, you’ll need to disassemble the camera by removing the screws holding the case together, and use a plastic prying tool to pull the case apart. Another potential problem is that the motherboard may be faulty; this would also require you to take the camera apart, this time to replace the motherboard....
Chosen Solution My phone is just showing white screen wat happened to it? Probably damage. Gonna guess the LCD needs to be changed. Could just need a reset though… http://m.youtube.com/watch?v=8syqMQZiLLs
Chosen Solution My WeMo switch no longer transmits power. It will turn on when plugged in and connect successfully to wifi, but activating the outlet switch does not transmit power to whatever is plugged in. Is there a fix? Hi @wattdee , What is the model number of your WeMo? If it is a F7C027 can you hear a “click” coming from the switch when you try to turn it on?...
Chosen Solution My tablet is turned on but there is no sound coming from the Orbo Jr. speaker. Hold the volume up button to check if the volume was not accidentally turned off. If the tablet is showing the volume turned all the way up restart the tablet and see if the sound starts to work. If you still have no sound after the restart refer to the Orbo Jr. Troubleshooting Page to further the troubleshooting....
Chosen Solution Why everything is not working properly e.g.fhassan, I do not own this device and I am not positive why your Asus Transformer Pad TF103C K010 is not functioning properly with Apps and games. You may want to try a hard/factory reset to fix this issue as some thing like an app/software could be corrupt. See link below for hard/factory reset procedure. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....
Chosen Solution I left my computer unplugged overnight and tried to wake it the next morning. It was completely dead and would not start up when plugged in or not. The battery is fully charged, and still no response. Unplug the mag-safe adapter. Press and hold the power button for 5 seconds. This failing, unplug the battery from the logic board, press and hold the power button for five seconds. Plug it back in and attach the mag-safe....
Chosen Solution My GT n8010 Samsung note says its charging but it isn’t. It is loosing power while it is plugged into the charger. The battery indicator says it is charging but the battery power doesn’t change. I haven’t tried a new cord yet, I wanted to first see if anyone else had this problem, and had a quick solution before I went out and bought another cable and charge unit....
Chosen Solution When i plug in the ipad it indicates it is charging with the lightning bolt in the upper right corner but it will not exceed 2% charge. any suggestions Clean charger port if there is any lint or dust blockage. Check if using original Apple cable and wall charger. Try holding power + home button for 15 seconds. Is the charger port flimsy when you plug the lightning cable in?...
Chosen Solution I want to connect my laptop to the router via USB port but only have USB 2.0 cables around the house and the USB 2.0 port on the router isn’t working. Can I connect to the router’s USB 3.0 port with the USB 2.0 cables? Yes. Any 2.0 USB cables should work with a 3.0 port.
