Chosen Solution Put in new battery but No green light when try to charge. Thus no charge. What can I do? Hi, Does the old battery indicate that is is charging when you insert it? If it does then perhaps your new battery either has dirty contacts (are they bright and shiny?) or it is faulty. If not have you tried connecting the camera to another compatible charging source to prove whether the charger is at fault?...
Chosen Solution I left my iPod in the rain - by accident. I got the water out of the screen (rice method) but now it only turns on when plugged in. It also has highest battery when plugged in but goes completely black when unplugged. Im devastated, what do I do?!! Thanks! Elinor, the rice method really only get some of the water out. you iPod may suffer from corrosion after, unless you clean it properly....
Chosen Solution Car will not crank if Ac is turned on or the radio on. Turn radio and Ac off car will crank. Headlights will not come on at all. When you turn the headlights on the hazard light indicator some on but do not flash, rear windo defroster comes on, dash lights are deam. when you turn on any of the aboved the engine will rev. Battery and alternator, fuses and relays check out fine...
Chosen Solution I just upgraded my macbook to Sierra and now I cannot log on to the computer. When it gets to the login screen, my keyboard isn’t working and I don’t know why. Many of the keys, like “P” and “I”, don’t work at all, but many keys like “O” do something, although I can’t tell whether they are working normally or not because I can’t see the password. “H” seems to function as a delete key....
Chosen Solution I have tried new batteries, heavy duty ones in fact yet my camera still won’t turn on. One day when I was taking photos my camera died out of the blue and the lens hadn’t reversed back in to its place & ever since my Nikon L830 hasnt turned on… Do I seek professional help? Here’s one thing you might try: Remove the batteries and the memory card. Wait for half an hour or so, and put the batteries back in but not the card....
Chosen Solution Sanyo 40" LCD-40XR10F Tv doesn’t come on but have power. Got a blank screen. Was working fine last night but not this morning Any ideas would be great and if it’s a quick fix can I do it myself? Any help would be greatly appreciated I held down menu and -volume, pressed power 1 time, to bring up menu. Then pressed volume to change settings. It came on. If I have to go to board and all that; I will get a new tv....
Chosen Solution when charger is plugged in it shows icon as charging but is not what would be the problem i have tried different chargers but to no avail here is a link for you to check out http://forums.toshiba.com/t5/Encore-Tabl…
Chosen Solution My laptop can not connect to wireless network only when it’s placed next to a router, it doesn’t work when it’s 15 metres away. I have same issues when I boot up Ubuntu USB. What exact parts should I buy so they’ll be compatible with my laptop? Hi Vikror, I would suggest you to check on your wifi card that was installed inside your mainboard. Sometimes due to impact, the wifi pigtail cable which is connected to the antenna might come out....
Chosen Solution Yeah, so my screensaver’s aren’t being recognized. I’ve updated, and restarted my laptop, and still it won’t allow me to configure the screensaver. Image Below: Haha Windows was having a panic attack. Turns out the Screensaver’s auto detected, I don’t need to manually install it. Thanks for trying to help! Not all executable files can simply be renamed to act as a screensaver. When Windows finds a file that appears to be a screensaver, it will expect it to respond appropriately to certain command line arguments, specific to screensavers....
Chosen Solution I keep receiving a note telling me that windows needs updating and will do so in so many minutes. I have done the updating countless times (mainly to stop the notice coming up repeatedly) but then a couple of days later, back it’s there again. It is sooo damned annoying. How can I stop it please? There’s a good chance that the update did not complete correctly. Go to Windows Settings > Update and Security and click check for updates....
Chosen Solution I have a Samsung Galaxy S3 that won’t power on. It was my daughter’s and got submerged in water. It was usable after that, but less so over time, until now, it will not boot at all. I’ve tried the conventional troubleshooting (different battery, boot to recovery mode, etc) without any success. She’s since gotten a new phone, and having come across ifixit.com, I thought it would be a good exercise to see if I can fix it....
Chosen Solution Does the fuse on board sopose to be white instead of clear? Hi Michell Cuellar , The best way to tell if it is OK or not is with the power disconnected and then to connect an Ohmmeter across the fuse and measure its’ resistance. It should measure 0.00 (zero) Ohms i.e. short circuit It is a slow blow fuse that is designed not to blow when the power is first connected to the TV and that is just the type of case that it is in....
Chosen Solution I have Samsung 50" LED TV that goes dark if both ribbon cable coming out of the T-con board is connected, but half side works (with white the other side) if I remove one of the ribbon cable. I’ve tried replacing T-con board and mother board. Nothing wrong with cable (I can switch cables and same result). Does this mean the panel is bad on one side? why does the whole screen go dark when I connect the bad side?...
Chosen Solution Hi, I’ve heard a squeak in my direct drive, front load washer. I took it all apart thinking it would be the bearing. When I got the back opened up and took off the motor rotor, I noticed that’s when the squeak stops. I checked out the bearing as best I could and it seems fine. There’s no rust, nothing seems to be leaking. I can turn the entire drum by hand, with ease when I turn the drum shaft after removing the rotor....
Chosen Solution I’m using an old Philips Photoframe for a visual art project that I’m working on; it’s worked fine over the past 2 days but then it started switching itself off after being turned on. It boots fine but just switches off while the home page is being loaded. Could I have turned power save on without knowing it (the photoframe worked the same time yesterday and the day before) or is there a genuine problem?...
Chosen Solution Hi, I have an iPhone 8 plus and I turn it on and load all of my stuff on. When it dies, I put it on charge as normal but it wouldn’t come back on. It got stuck on the apple logo. I then went on to reset it using iTunes and it worked but would only set up as a new iPhone as when I went to restore from a backup, it would do the normal process then go to the apple logo with a progress bar....
Chosen Solution My printer uses Brother LC 103 ink cartridges. The printer had a paper jam, that I fixed. However, it still shows a jam and won’t print (or even scan). I have double and triple checked for tiny bits of paper (none). I have turned it off, unplugged it, restarted it, restarted the computer, etc. But no good. Any suggestions ? Sounds like the rubber feeder rollers need cleaning. carefully open the carriage and wipe the rollers with some Isopropyl alcohol using a cotton swab....
Chosen Solution so i have a windows 7 computer in good condition, sometimes runs fast, updated regularly but its always crashing. yes i do play video games on it like roblox but its fine and only rarely lags.. it comes with: i cant find appdata i could for mini dump but im very comfused right now…… Warm Regards… enchantedtwist AppData is typically hidden from the average user to prevent them from deleting important system files....
Chosen Solution I am just changing my iPhone 7 and playing ark when it starts getting almost to hot to touch If it isn’t “too hot to touch"and if you’re not getting any error messages, I will say that this appears to be normal. You are using the device intensively (playing a game) and charging it at the same time. It’s normal for the phone to get hot. Rest assured, the iPhone contain several thermistors designed to measure and monitor the heat of the logic board and if anything goes out of spec, you will see an error message....
Chosen Solution When I turn on my Optoma HD 20 projector, the image appears blurry and out of focus. What can I do to fix this? The image may be grainy and out of focus because the projector may not be at the recommended viewing distance which is 5.2 - 32.7 ft. Adjusting the zoom lens may also help remedy the problem. If this still isn’t fixing the problem you may need to take apart the device and clean the bulb/lens....
