Chosen Solution Here’s the guide for doing it along with a parts source: MacBook Power Cord 5-Pin MagSafe Connector and Cable Replacement Sadly, Apple doesn’t offer replacement parts for the AC adapter. They look at it as a safety issues between what it takes to open the welded case and the possibility of damaging the computer.
Chosen Solution I have replaced my battery with what should be an original battery for the Huawei P8 GRA-L09, battery nr: HB3447A9EBW. After having assembled the phone again I experience some weird issues with the battery level dropping from 50%, 60%, 70% or even 100% in an instant. I have tried calibrating the battery by letting it die completely, recharge to 100%, let it drain completely again and recharge to 100%....
Chosen Solution 1999 Ford F-150 5.4l Triton. Driving down the road and all of the sudden major decrease in power and engine rough and loud “banging.” Checked all plugs and coils, no codes at all. No misfires according to OBD2 scan. What could cause this and no codes? Thanks. There may be a pushrod bent or a bent valve or lifter(s) are sticking or the engine may have swallowed a valve....
Chosen Solution My phone fell on the ground and wont work normally it had no screen damage. It wont even charge but when i tried to charge my phone it made a flash like taking a picture but the phone is turned off but why? Please help Hi, There most probably is some internal damage to the phone due to the fall. It will have to be opened and inspected as to what the problem may be....
Chosen Solution I have left my iPhone 5s in a draw for over a year and I went to use it today. It has no damage on the outside and is in perfect condition yet it will not charge, turn on or connect to iTunes. I left it in the draw after i upgraded my phone but now it will not work. Solutions please? I would suggest taking it to the store where you bought it from or Apple service center and let them have a look at it....
Chosen Solution my phone suddenly turned slow so i restarted it, but then it got stuck on the apple logo, after like 5 minutes it turned to a black off screen, in 3 seconds it turned to apple logo again by itself, and kept on going for an hour i decided to put it in the charger i went to check on it after a while and it finally turned on it turned of again after 2 minutes but it was fully charged i finally put it on recovery mode to update it then suddenly leaves recovery mode and turns on again after 2 minutes it turns off what should i do?...
Chosen Solution I put my phone away for school and came back and the screen was black and it was slightly wet (my water bottle leaked). It still makes noise. I turned it on once where it looked totally fine, and shut off again. I was wondering what could be wrong with it and what it would cost to repair it? Hello, Dry the phone to the bast of your ability on the outside....
Chosen Solution I shine a flash light on the TV and I see the picture. Is it the lamps? @jazzyjaz97 entirely possible that this is caused by a failed backlight. Measure the output from your power board to the LED’s and if you do have power appropriate for the LED’s than it is time to disassemble your panel and try a new set of LED backlight strips.
Chosen Solution Whenever I use my charger, most of the time it just pops up with a message that says something along the lines of “this accessory may not be supported”. However, if I can get my charger in the perfect position it manages to charge but it can’t even be touched or else it will stop working and is also really annoying and bothers me a lot. Is anybody else having this problem?...
Chosen Solution Why my camera doesn’t have option for front to rear camera button, or flash option button? I have a zte max pro from metro? Has your phone ever had the option of switching cameras in the built-in camera app? Is there any settings options inside your camera app? The phone specs clearly show a front facing camera, so there should be an option there. Worst case scenario, if you really want that feature back, backup all the data on your phone and try factory resetting it....
Chosen Solution why my phone is not getting on after water damage Sohail Mushtaq, Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phone. You really should take care of the corrosion that is happening inside the phone from the water damage as that could be your problem. A tear down link for your device Link #1, disassembly guide/vid....
Chosen Solution coryconrad what exact model is it? Have you tried to disconnect all inputs and disconnect the power from the TV. Hold the power button down for about 30-60 sec. Then plug the power back in and connect one local video source (DVD BR or Game console) and check to see if that made a change. Do not try to stream etc. at this time. Also, try to disconnect from any network you may be on....
Chosen Solution I cracked the camera lens on my iPhone 7. The crack is noticeable with direct sunlight. In order to replace the camera lens iPhone needs to be disassembled. I am wondering if the iPhone 7 will loose its water resistance after? The question to ask your local technician would be….“Do you replace the adhesive strips on the display assembly when you are putting the phone back together?” If they do, the phone should keep its water resistance....
Chosen Solution Mac won’t come out of sleep mode it seems. When I plug it in to charge I can hear the little ping telling me it’s charging but screen not turning on. Any help? press and Hold Shift + Control + Option and Power button for 12 seconds. Release all keys at the same time, then reconnect the Power cable and turn the Mac back on again. Now, reboot the Mac again and this time hold down Command+Option+P+R keys concurrently for about 20 seconds, this resets the NVRAM and restart Mac
Chosen Solution Truck has a 22r. it runs fine until warm then it wont idle. @lvec1 , Lou Vecchia, Possibly a stuck EGR valve or vacuum leak, although there are a lot of things that could cause idle problems, dirty carb., weak fuel pump, clogged filter, bad plugs, failing coil, etc. etc.. Links below may help trouble shoot your issue. http://www.toyotanation.com/forum/80-89-… http://4x4wire.com/forums/ubbthreads.php…
Chosen Solution my friend has a ibook and one day he plugged in the charger then it maid a loud pop sound and wouldnt turn on he said the he even changed the battery but it still will not tur on You’ve probably burned out the DC-IN port. I wouldn’t trust the charger either. Please give us the last three figures of your serial number so we can determine which machine you have and can get you to the correct part and installation guides....
Chosen Solution touch screen some time not working how solution check the cable connector ->open casing with screw ->release the cable connector ->clean it -.>maybe it just dirty hope it can resolve your problem some models can be corrected by pressing on the upper left corner of the screen and holding for 5 seconds.
Chosen Solution So my lock button got stuck? It is impossible for me to activate my ipod (only via computer it is), i went to an apple store because my ipod was still on warranty. They said the spring from under the button broke and unfortunately they didn’t want to fix it for free they said it was kinda my fault … So here I am! Can someone please help me they said the reparation would cost me €100 ($137)....
Chosen Solution Good day! So I placed my system on my dining table today and while preparing my food, I accidentally shook my glass of water and few drops of water went to my keyboard. I immediately wiped it, even the sides of each key affected. Nothing has changed and it’s still working perfectly normal but I’m afraid it might suddenly damage the insides of my laptop. I’m wondering if anybody has already experienced this and if yes, will my system be okay?...
Chosen Solution The unit was sitting unpowered and unplugged for a few years. When booting PC the system detects an error and goes directly to a start up recovery screen and the on screen options are to start the recovery or cancel.. The problem is I can’t use the touch screen and the mouse and keyboard are not being detected either.. Trying to figure out what happened.. The keyboard and mouse are wireless and the system is a 320 not a 300...
