Chosen Solution I hear the boot sound but there’s no image on the screen. I tried an smc reset and a pram reset. i tried to connect to an external monitor but the monitor never got a signal. This is a known issue. I took it to the genius bar and they fixed it even though it was out of warranty. The problem was with the logic board (video card)....
Chosen Solution I’m interested in finding out from anyone that has looked at the mbp touch bar & not touch bar internals, if it would be possible to have the chassis body machined to allow for swapping in the non touch bar keyboard? Basically I want to restore the physical function keys from a sanely designed (non touch bar) laptop. Is there enough space? What cabling would I need to create or modify to do this?...
Chosen Solution when purchased was already a part and need to know how to replace deck belt and how or where the tentionar is to be located and how belt is arranged Hi, Here’s the operators manual for the mower. On p.16 it shows how the belt is installed. From p.66 onwards it has the part diagrams and the part numbers for all the parts in the mower. Hopefully this is of some help....
Chosen Solution Toshiba tv. Unsure of model. My power button stopped working for the tv on sky remote but it controls all other tv function and sky fjnctilns eg volume. Brought new sky remote but exactly same. Reprogrammed sky remotes and all same. So found orignal tv remote and exactly same all functions work except power button. So 3 remotes all work perfectly well except power on/off function. Tv will turn on/off usong power button on tv and will switch off if if i set the tv timer Completely Puzzled...
Chosen Solution hey guys - i am having issue with my internal keyboard that is being overwritten by my external keyboard so i cannot, at startup, press the option key to go back to my MAC OS….therefore i am stuck with WINDOWS. Does anyone know, at WINDOWS via terminal or whatnot, make the machine select the MAC OS as default? im so desparate that it d be ok with deleting windows altogether…assuming i can go back to my MAC OS....
Chosen Solution When I tried to change the software to G4, it rebooted itself and is stuck and won’t pass the lg logo, it been like that since August, help? Do you have a Custom Recovery or Factory? If former follow the directions to get into the recovery mode. From there restore the prior ROM. If latter do Hard Reset.
Chosen Solution when watching korean movie from singapore channel u, the sub.title cant switch from chinese to english. the adjustment at the tv setting for sub-title is always off. cant able to switch on. rickyho69 that does not sound like a TV issue. Probably the station only supplies Chinese Subtitles.
Chosen Solution I have tried many things to clear the Sud and F35 error codes and nothing seems to work. I replaced both the pressure switch and drain pump, also tried changing the CCU board but nothing seems to work. The wire harness is also fine but the sud and f35 eorrors still appear. Can anyone help? pigterrio okay so let’s clarify: UD : The Sud error code is used to indicate there are too many suds for the washer to remove....
Chosen Solution I have a surface studio 2, 1tb i7 M1707. My power supply is dead due to an extreme power surge. I need the part at all costs, Microsoft was not helpful at all. I have a picture of it, i wish i could attach! You can get a new power supply for your Surface device here.
Chosen Solution I was replacing the shell of my switch. When I did I messed up one of the joycons ribbons. But wasn’t syncing up. So then I replaced the charging slider for that side. At first it powered up before I replaced the slider. But when I when put the new joycon sliders on and went to check it. The screen wouldn’t turn on. Thought it was dead but still hasn’t turned on....
Chosen Solution Phone working fine for a week, now goes straight to voicemail for any local call coming in. Tech states I should change my number to a local area code. I have never had an issue with my number in all the years owning a phone, only with switching over to straight talk. Hi @dmax , Check the following: Check the Call forwarding unconditional setting Call Forwarding Unconditional (CFU) immediately forwards all calls to another phone number without allowing the device to ring....
Chosen Solution the cord is the same cord when I got it but when its charged and I turn it on after a few minutes it powers off and says its dead when I turn it back on That tablet’s battery is known to be bad like that, I have the same issue.
Chosen Solution After Windows 10 updated my camera is not working. Was this an update or an upgrade , were you coming from windows 8 to windows 10 ? If your coming from windows 8 then you may need to go to the RCA website and download the appropriate drivers for the camera in your tablet . As you did not specify which tablet you have I cant say which drivers you would require but if you go to the RCA site you can enter your tablet and get the appropriate drivers ....
Chosen Solution I am trying to put a new bit in my rotary tool but it keeps falling off when I try to adjust it The device collet nut, end piece, may be broken. It will need to be replaced. You can check more information here. Rotary tools use different sized bits. Commonly a Tool like a Dremel uses a 1/4" collet size. A dental tool, such as the one I use, a Emesco jack rabbit uses 7/16" bits....
Chosen Solution Hi, My MacBook 2GHZ Core 2 Duo LCD display has some blue lights when I move the screen. In some positions nothing happen but in 90% of the positions, it is there, blue mainly on the dark colors of the images. I have been checking and couldn’t find anyone with the same problem on the net. It seems to be just a bad contact somewhere, do you think that I have to change my LCD screen?...
Chosen Solution Hi all, I have some problems with my mid 2010 15” macbook pro. It wont turn on anymore. This happend after one of the many “Kerner panics“ this laptop used to have. Because of the fauty video card this happened once in a while. Tried software solutions to stop the dynamic switching between the CPU and video card, but i was never able to stop these errors completely. But I was always able to just restart the laptop after this error, but not this time....
Chosen Solution When making a cut the saw blade seems to bounce up and down. It will not make a clean cut through the material. I have tried using different speeds but it is still bouncing Tension is too loose, the teeth are dull, or the material is too thick. A blade that does not have enough tension will wander. It will also flex from side to side, making for irregular or angled cuts....
Chosen Solution My element tv that I have had for a god 2-3 years has developed like 5 or so black lines that make the more of the top of the screen darker and this is on all inputs this appeared randomly and not a consumer mistake DerpFace, Sounds like you may have a thermal crack on the internal screen if you do not see any crack on the outside. It could have also been caused by something accidentally hitting it or when moving it....
Chosen Solution I started to download an app and now it won’t do anything. How can I fix it? If you cannot press any of the options due to an unresponsive screen, continue to hold down the power button until the device turns off. After the device turns off, hold down the power button for 2 to 3 seconds to restart the device.
Chosen Solution Why my Macbook Pro can’t find my HDD (SATA) in the Superdrive bay (PATA)? I changed my original HDD by a SSD HDD? Then, I changed my Superdrive (PATA connection) by the original HDD (SATA connection) with a caddy PATA-SATA. My MacBook Pro can’t find my HDD but I can hear it running. Does anyone know what is the problem? Can the problem is the PATA-SATA adapter? Thanks!...
