Posts

Chosen Solution So I have a A1502 Late 2013 and Early 2015 with me at the moment. If I unplug the battery they won’t power on without a 85 Watt charger? Is this normal? Review the required charger here: Find the right power adapter and cable for your Mac notebook You do need to use the correct charger for your system as the wattage needs to be equal or larger than what the system requires....

Chosen Solution My hoover steam cleaner just stopped sucking the water back up out of the carpet. the return bin is empty I would check for a break in the vacuum lines, hoses and clamps. Try cleaning the return canister float ball. If it is stuck in the up position the machine will not make vacuum. Check the gasket under the dirty water tank. If there’s not a good seal/broken gasket, it won’t have good suction....

Chosen Solution Yosemite clean installation doesn’t complete after hhd installation. Early 2008 20" iMac. Did you use the original system installation DVD and Disk Utilities to first format the drive GUID and Mac OS X extended?

Chosen Solution So I have a iPhone 5c here, and it is stuck in DFU mode. I have tried recovering it with itunes, it gets as far as a apple logo with a empty progress bar and then it just stays like that. I have let it sit overnight and it still is stuck on empty recovery bar. If I do any combination of buttons, like holding home button and plugging in, hard reset, enter DFU mode, it will always get stuck in DFU mode....

Chosen Solution I have 2 MacBook Pro 13 inches.one is early 2011 model and the other one is mid 2012 model.can I swap the displays as my 2011 model have display issues and 2012 model have mother board issues.so my question is,is it compatible? I’m afraid not. The Early and Late 2011 13" MBPs can use the same display panel, but the Mid 2012 (and later) 13" use a different panel....

Chosen Solution I want to install Linux Ubuntu 17 instead of Windows 10. I burned my USB with Unetbootin. When I chose UEFI usb in boot menu screen displays error that “system doesn’t have any usb boot option please select other boot option in boot manager menu " How do I fix it? Have you enabled usb as a boot option in the UEFI/BIOS? What do you mean by boot screen?...

Chosen Solution Hello everyone! As you know G S7 edge is water proof , so yesterday my screen was really dirty so I had to wash (done alot no probs) and then when I wanted to dry it there wasn’t anything except air blowing dryer for hands (shopping mall) so I did after 2 minutes I saw a green line on the left side of my screen, my question will be, is it fixable?...

Chosen Solution The machine fills up fast and above ordinary level and still it wont goto next cycle and drain, displaying a nf error which stands for a water filling failure… it does fill. Even over fill. I even have leaks due to water level. I have to power off the machine and force the spinning cycle for the water to drain. When i go into forced spin cycle, the water drains easily but the cycle seems stuck....

Chosen Solution Nice picture, volume set at 100% can barely be heard. Checked Dvd on other players & ok. 2nd new set from Wal-mart is the same as the previous set. device: 32 inch Proscan TV..DVD Combo Hi, I assume that the volume when in TV mode is OK, is this correct? Have you tried a different DVD disc, to prove that it is not a disc compatibility problem? (I realize that you said that the DVD works in another player) Have you tried pressing the ‘audio’ button (in the DVD section) on the remote control to see if altering the setting resolves your problem?...

Chosen Solution I have my laptop running Windows 10 Home, my laptop abruptly stop recognizing wifi networks I have 2 routers and none of them cant find it, it find the wifi network only if it is extremely near to the router, Im trying to update the driver I downloaded it from here: https://www.asus.com/Laptops/X555LB/Help… I followed this steps to install it: Step by step Extract the drivers package and get into the folder Click the File option from the upper left corner of the driver package folder Move the cursor to the Open Windows PowerShell option Select Open Windows PowerShell as administrator option Select Yes, Allow this app to make changes to your device....

Chosen Solution Hi all ! I repaired my phone, the power button works normally again. Therefore, my phone is randomly rebooting every 30s to 3mn, don’t know why. Impossible to find a solution to fix it. Maybe someone could help me ? Hey maudbrechet, try to redo the installation. Sometimes things can go wrong. Also if it reboots when you charge, you might need to replace the battery. -Let me know how it goes....

Chosen Solution Keeps doing factory reset. Erases all contacts pictures including SD card. Everything lost. Has happened more times than I can count. What’s wrong? Not sure its factory reset but acts the same as if it was Sounds like the System Firmware (Android Operating System) on the phone has gone haywire. I recommend reinitializing the firmware using Samsung Smart Switch Image on how to use Samsung Smart Switch for phone reinitialize:...

Chosen Solution The device has shut off while in use more than once without indication as to why. What can I do to address this issue? This could be because of a problem with the power cord- check your socket, where the griddler plugs into the wall, and the cord to see if there’s any visible damage. You can check out this troubleshooting guide for some possible fixes! When the griddle is warming up , it is dripping....

Chosen Solution I have the lg f6 from metro pcs, i dropped it in water, put it in, unassembled it, put it bavk together let it dry for a few day but still when i try to turn it on just the lcd bottom lights turn on, the screen is just blank, help please Hi, First disassemble it, check very well for water damage (is good to use magnifying glass). Check the LCD connector and the LCD Flex cable....

Chosen Solution Hi, I’ve been repairing iphones for a while but cannot figure out why sometimes when I repair a 6 the top left corner is raised. This has happened on multiple occasions, it doesn’t affect performance but you can see the backlight through the side. Does it need adhesive or is it a bad frame on the LCD? It’s a common problem. Especially with replacement screens. It usually has to do with the frames they use during refurbishment....

Chosen Solution Hi. my iPad responds or recognizes the charger being plugged in but dose not charges (i eve used different chargers to check if it was my chargers fault but NO) and after like 3 hours of charging it shows only the apple symbol and if remove its the same thing dose not have charge at all asks for charging again so….should just replace the battery or is there some other problem …?...

Chosen Solution Just to get a tip on how to fix Samsung that’s showing double image on screen especially this model of the TV LA32D403 @ugotex just going by your description it could be a GATE TAB bond failure. That is on the panel itself. It will help if you post an image of what your screen displays. Use this guide to do that. It will allow us to see what you see....

Chosen Solution I dropped my iphone 4S in the water and it was still working but after an hour it wasnt working at all that all was before 5monthes ,is there a solution thankyou @aoshahh the first thing I suggest is that you no longer try to do anything with the phone until it is cleaned, you are running risk of further damaging it. Disassemble the phone using these guides. Then clean the phone with +90% isopropyl alcohol....

Chosen Solution My iPhone 6 worked fine. It died today and now when I plug it in it shows the battery bar like it’s charging but won’t turn on. It will randomly turn on after I take it off and put it back on but then it dies maybe 5-10 sec after the lock screen shows up. Can anyone help me please?? Has the phone failed following some kind of repair or impact?...

Chosen Solution I keep trying to turn my laptop on but it’s not working. I pulled it in to charge it to see if that was the problem but still nothing. This happened to me too. At first, I thought that my laptop just died and needed to be charged. When that did not work I got a new battery and after replacing that it turned on right away.